On Establishing Buckling Knockdowns for Imperfection-Sensitive Shell Structures

This paper investigates issues that have arisen in recent efforts to revise long-standing knockdown factors for elastic shell buckling, which are widely regarded as being overly conservative for well-constructed shells. In particular, this paper focuses on cylindrical shells under axial compression with emphasis on the role of local geometric dimple imperfections and the use of lateral force probes as surrogate imperfections. Local and global buckling loads are identified and related for the two kinds of imperfections. Buckling loads are computed for four sets of relevant boundary conditions revealing a strong dependence of the global buckling load on overall end-rotation constraint when local buckling precedes global buckling. A reasonably complete picture emerges, which should be useful for informing decisions on establishing knockdown factors. Experiments are performed using a lateral probe to study the stability landscape for a cylindrical shell with overall end rotation constrained in the first set of tests and then unconstrained in the second set of tests. The nonlinear buckling behavior of spherical shells under external pressure is also examined for both types of imperfections. The buckling behavior of spherical shells is different in a number of important respects from that of the cylindrical shells, particularly regarding the interplay between local and global buckling and the post-buckling load-carrying capacity. These behavioral differences have bearing on efforts to revise buckling design rules. The present study raises questions about the perspicacity of using probe force imperfections as surrogates for geometric dimple imperfections.

[1]  A. Evkin,et al.  Design buckling pressure for thin spherical shells: Development and validation , 2019, International Journal of Solids and Structures.

[2]  C. Hühne,et al.  Robust knockdown factors for the design of spherical shells under external pressure: Development and validation , 2018, International Journal of Mechanical Sciences.

[3]  Christian Hühne,et al.  Robust knockdown factors for the design of cylindrical shells under axial compression: Analysis and modeling of stiffened and unstiffened cylinders , 2018, Thin-Walled Structures.

[4]  C. R. Calladine.  Shell buckling, without ‘imperfections’ , 2018 .

[5]  Emmanuel Virot,et al.  Stability Landscape of Shell Buckling. , 2017, Physical review letters.

[6]  J. M. Rotter.  Challenges and their resolution in both philosophy and process to exploit advanced computation in shell structure design , 2017 .

[7]  Christian Hühne,et al.  Robust design criterion for axially loaded cylindrical shells - Simulation and Validation , 2017 .

[8]  John W. Hutchinson,et al.  Nonlinear Buckling Interaction for Spherical Shells Subject to Pressure and Probing Forces , 2017 .

[9]  J. Hutchinson.  Buckling of spherical shells revisited , 2016, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[10]  J. Hutchinson,et al.  The Geometric Role of Precisely Engineered Imperfections on the Critical Buckling Load of Spherical Elastic Shells , 2016 .

[11]  Bo Wang,et al.  Influence of imperfection distributions for cylindrical stiffened shells with weld lands , 2015 .

[12]  Isaac Elishakoff.  Resolution of the Twentieth Century Conundrum in Elastic Stability , 2014 .

[13]  Bo Wang,et al.  Determination of realistic worst imperfection for cylindrical shells using surrogate model , 2013 .

[14]  Raimund Rolfes,et al.  The Effects of Geometric and Loading Imperfections on the Response and Lower-Bound Buckling Load of a Compression-Loaded Cylindrical Shell , 2012 .

[15]  Mark W. Hilburger,et al.  Developing the Next Generation Shell Buckling Design Factors and Technologies , 2012 .

[16]  Mark W. Hilburger,et al.  Validation of Lower-Bound Estimates for Compression-Loaded Cylindrical Shells , 2012 .

[17]  J. Michael Rotter,et al.  Shell buckling design and assessment and the LBA‐MNA methodology , 2011 .

[18]  Rüdiger Schmidt,et al.  Deformation and buckling of axially compressed cylindrical shells with local loads in numerical simulation and experiments , 2011 .

[19]  Raimund Rolfes,et al.  Robust design of composite cylindrical shells under axial compression — Simulation and validation , 2008 .

[20]  Luc Wullschleger.  Numerical investigation of the buckling behaviour of axially compressed circular cylinders having parametric initial dimple imperfections , 2006 .

[21]  Ekkehard Ramm,et al.  Buckling of Shells , 1982 .

[22]  J. Arbocz,et al.  The Imperfection Data Bank, a Mean to Obtain Realistic Buckling Loads , 1982 .

[23]  E. Riks.  An incremental approach to the solution of snapping and buckling problems , 1979 .

[24]  Aviv Rosen,et al.  Effect of Axisymmetric Imperfections on the Vibrations of Cylindrical Shells under Axial Compression , 1974 .

[25]  Bernard Budiansky,et al.  Asymptotic Formulas for the Buckling Stresses of Axially Compressed Cylinders With Localized or Random Axisymmetric Imperfections , 1972 .

[26]  John W. Hutchinson,et al.  Buckling of circular cylindrical shells under axial compression. , 1972 .

[27]  R. C. Tennyson,et al.  Effect of a Local Axisymmetric Imperfection on the Buckling Behavior of a Circular Cylindrical Shell under Axial Compression , 1970 .

[28]  P. Seide,et al.  Buckling of thin-walled circular cylinders , 1968 .