Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC

Background. It is expected that fuel cells will play a significant role in a future sustainable energy system, due to their high energy efficiency and possibility to use renewable fuels. Fuels, such as biogas, can be produced locally close to the customers. The improvement for fuel cells during the last years has been fast, but the technology is still in the early phases of development, however the potential is enormous. Method of approach. A CFD approach (COMSOL Multiphysics) is employed to investigate effects of different fuels such as biogas, pre-reformed methanol, ethanol and natural gas. The effects of fuel inlet composition and temperature are studied in terms of temperature distribution, molar fraction distribution and reforming reaction rates within a singe cell for an intermediate temperature solid oxide fuel cell (IT-SOFC). The developed model is based on the governing equations of heat-, mass- and momentum transport, which are solved together with global reforming reaction kinetics. Results. The result shows that the heat generation within the cell depends mainly on the initial fuel composition and the inlet temperature. This means that the choice of internal- or external reforming has a significant effect on the operating performance. Conclusions. The anode structure and catalytic characteristic have a major impact on the reforming reaction rates and also on the cell performance. It is concluded that biogas, methanol and ethanol are suitable fuels in a SOFC system, while more complex fuels need to be externally reformed. (Less)

[1]  S. Chan,et al.  Energy and exergy analysis of simple solid-oxide fuel-cell power systems , 2002 .

[2]  B. Haberman,et al.  Three-dimensional simulation of chemically reacting gas flows in the porous support structure of an integrated-planar solid oxide fuel cell , 2004 .

[3]  M. Grae Worster,et al.  Interfacial conditions between a pure fluid and a porous medium: implications for binary alloy solidification , 2006, Journal of Fluid Mechanics.

[4]  Stefano Ubertini,et al.  Modeling solid oxide fuel cell operation: Approaches, techniques and results , 2006 .

[5]  B. Sundén,et al.  Catalyst Materials and Catalytic Steam Reforming Reactions in SOFC Anodes , 2012 .

[6]  Andrei G. Fedorov,et al.  Local thermal non-equilibrium effects in porous electrodes of the hydrogen-fueled SOFC , 2006 .

[7]  Emmanuel Kakaras,et al.  Comparison between two methane reforming models applied to a quasi-two-dimensional planar solid oxide fuel cell model , 2009 .

[8]  Chung-Hsing Chao,et al.  Predictions of phase temperatures in a porous cathode of polymer electrolyte fuel cells using a two-equation model , 2006 .

[9]  M. Fowler,et al.  Performance comparison of Fick’s, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode , 2003 .

[10]  Dennis Y.C. Leung,et al.  A review of biomass-derived fuel processors for fuel cell systems , 2009 .

[11]  C. Adjiman,et al.  Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance , 2004 .

[12]  Yann Bultel,et al.  Modeling of a SOFC fuelled by methane: From direct internal reforming to gradual internal reforming , 2007 .

[13]  W. Bessler,et al.  The influence of equilibrium potential on the hydrogen oxidation kinetics of SOFC anodes , 2007 .

[14]  S. Assabumrungrat,et al.  Modelling of tubular-designed solid oxide fuel cell with indirect internal reforming operation fed by different primary fuels , 2010 .

[15]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[16]  Colin Pritchard,et al.  On the use of electrolytic hydrogen from variable renewable energies for the enhanced conversion of biomass to fuels , 2008 .

[17]  R. Herbin,et al.  Three-dimensional numerical simulation for various geometries of solid oxide fuel cells , 1996 .

[18]  Andrew Dicks,et al.  Catalytic aspects of the steam reforming of hydrocarbons in internal reforming fuel cells , 1997 .

[19]  Martin Andersson,et al.  SOFC Modeling Considering Mass and Heat Transfer, Fluid Flow with Internal Reforming Reactions , 2009 .

[20]  Bengt Sundén,et al.  Review of catalyst materials and catalytic steam reforming reactions in SOFC anodes , 2011 .

[21]  B. Sundén,et al.  LTNE approach and simulation for anode-supported SOFCs , 2009 .

[22]  Suttichai Assabumrungrat,et al.  Catalytic steam reforming of methane, methanol, and ethanol over Ni/YSZ : The possible use of these fuels in internal reforming SOFC , 2007 .

[23]  R. Mark Ormerod,et al.  Implications for Using Biogas as a Fuel Source for Solid Oxide Fuel Cells: Internal Dry Reforming in a Small Tubular Solid Oxide Fuel Cell , 2002 .

[24]  Weeratunge Malalasekera,et al.  An introduction to computational fluid dynamics - the finite volume method , 2007 .

[25]  Vinod M. Janardhanan,et al.  CFD analysis of a solid oxide fuel cell with internal reforming : Coupled interactions of transport, heterogeneous catalysis and electrochemical processes , 2006 .

[26]  Ricardo Chacartegui,et al.  On the effect of methane internal reforming modelling in solid oxide fuel cells , 2008 .

[27]  Ibrahim Dincer,et al.  Mathematical modeling of transport phenomena in porous SOFC anodes , 2007 .

[28]  Samuel Stucki,et al.  Charge, mass and heat transfer interactions in solid oxide fuel cells operated with different fuel gases-A sensitivity analysis , 2008 .

[29]  Anil Date,et al.  Introduction to Computational Fluid Dynamics , 2023, essentials.

[30]  Moses O. Tadé,et al.  A CFD-based model of a planar SOFC for anode flow field design , 2009 .

[31]  W. Lehnert,et al.  Structural properties of SOFC anodes and reactivity , 1998 .

[32]  Massimiliano Cimenti,et al.  Thermodynamic analysis of solid oxide fuel cells operated with methanol and ethanol under direct utilization, steam reforming, dry reforming or partial oxidation conditions , 2009 .

[33]  J. Canales‐Vázquez,et al.  Preparation of thin layer materials with macroporous microstructure for SOFC applications , 2008 .

[34]  Dennis Y.C. Leung,et al.  Micro-scale modelling of solid oxide fuel cells with micro-structurally graded electrodes , 2007 .

[35]  R. Shah.  Laminar Flow Forced convection in ducts , 1978 .

[36]  Daniele Cocco,et al.  Use of alternative hydrogen energy carriers in SOFC–MGT hybrid power plants , 2009 .

[37]  Ioannis K. Kookos,et al.  Modelling mass transport in solid oxide fuel cell anodes: a case for a multidimensional dusty gas-based model , 2008 .

[38]  Bengt Sundén,et al.  Analysis of parameter effects on chemical reaction coupled transport phenomena in SOFC anodes , 2009 .

[39]  Amornchai Arpornwichanop,et al.  Electrochemical study of a planar solid oxide fuel cell: Role of support structures , 2008 .