Nuclear Fuel Reprocessing

This is an a submission for the Encyclopedia of Sustainable Technology on the subject of Reprocessing Spent Nuclear Fuel. No formal abstract was required for the article. The full article will be attached.

[1]  Michael F. Simpson,et al.  Equilibrium model for ion exchange between multivalent cations and zeolite‐A in a molten salt , 2005 .

[2]  J. Law,et al.  Fission Product Extraction (FPEX): Development of a Novel Solvent for the Simultaneous Separation of Strontium and Cesium from Acidic Solutions , 2005 .

[3]  Yang,et al.  A preliminary study on the safeguardability of a Korean advanced pyro-processing facility (KAPF) , 2007 .

[4]  J. Y. Park,et al.  Metal waste forms from the electrometallurgical treatment of spent nuclear fuel , 1996 .

[5]  B. R. Westphal,et al.  Electrorefining Experience For Pyrochemical Reprocessing of Spent EBR-II Driver Fuel , 2005 .

[6]  K. M. Goff,et al.  Actinide Recovery Experiments with Bench-Scale Liquid Cadmium Cathode in Real Fission Product-Laden Molten Salt , 2009 .

[7]  Paul Dautier,et al.  YEARS OF EXPERIENCE WITH LIQUID-LIQUID EXTRACTION EQUIPMENT IN THE NUCLEAR INDUSTRY , 2003 .

[8]  I. Johnson,et al.  Occlusion and ion exchange in the molten (lithium chloride-potassium chloride-alkali metal chloride) salt + zeolite 4A system with alkali metal chlorides of sodium, rubidium, and cesium , 2001 .

[9]  Y. I. Chang.  The Integral Fast Reactor , 1989 .

[10]  Manson Benedict,et al.  Nuclear Chemical Engineering , 1981 .

[11]  L. L. Macaluso,et al.  ANNULAR CENTRIFUGAL CONTACTORS FOR MULTIPLE STAGE EXTRACTION PROCESSES , 2001 .

[12]  G. Vandegrift,et al.  Evaluation of hydroxamic acid in uranium extraction process : literature review. , 2001 .

[13]  Eric J. Karell,et al.  Separation of Actinides from LWR Spent Fuel Using Molten-Salt-Based Electrochemical Processes , 2001 .

[14]  J. J. Laidler,et al.  Lab-scale demonstration of the URES+1a process using spent fuel , 2007 .

[15]  H. K. Geyer,et al.  Modeling of a Zeolite Column for the Removal of Fission Products from Molten Salt , 1998 .

[16]  W. E. Ebert,et al.  Testing to evaluate the suitability of waste forms developed for electrometallurgically treated spent sodium-bonded nuclear fuel for disposal in the Yucca Mountain reporsitory. , 2006 .

[17]  T. H. Fanning,et al.  Separations and Transmutation Criteria to Improve Utilization of a Geologic Repository , 2006 .

[18]  D. Vaden,et al.  Engineering-Scale Liquid Cadmium Cathode Experiments , 2006 .

[19]  B. Boullis,et al.  FUTURE NUCLEAR FUEL CYCLES : PROSPECTS AND CHALLENGES , 2008 .

[20]  C. Watts.  Solvent extraction equipment evaluation study. Part 2. Workshop proceedings , 1977 .

[21]  G. J. Bernstein,et al.  A High-Capacity Annular Centrifugal Contactor , 1973 .

[22]  B. R. Westphal,et al.  Production of metal waste forms from spent fuel treatment , 1995 .

[23]  Ralph A. Leonard,et al.  Recent Advances in Centrifugal Contactor Design , 1988 .

[24]  Tatsujiro Suzuki,et al.  Japan's spent fuel and plutonium management challenge , 2011 .

[25]  J. E. Battles,et al.  Electrorefining of uranium and plutonium - A literature review , 1992 .

[26]  M. Masson,et al.  GANEX: Adaptation of the DIAMEX-SANEX Process for the Group Actinide Separation , 2007 .

[27]  G. Casamatta,et al.  Simulation of a pneumatically pulsed liquid-liquid extraction column , 1990 .

[28]  R. Vinoche,et al.  COEX - process: cross-breeding between innovation and industrial experience , 2008 .

[29]  C. E. Till,et al.  The intergral fast reactor-an overview , 1997 .

[30]  David H. Meikrantz,et al.  Evaluation of a New Remote Handling Design for High Throughput Annular Centrifugal Contactors , 2009 .

[31]  J. Ackerman,et al.  Chemical basis for pyrochemical reprocessing of nuclear fuel , 1991 .

[32]  R. G. Geier,et al.  APPLICATION OF THE PULSE COLUMN TO THE PUREX PROCESS , 1957 .

[33]  Yung-Zun Cho,et al.  A New Approach to Minimize Pyroprocessing Waste Salts Through a Series of Fission Product Removal Process , 2008 .

[34]  P. D. Wilson.  The nuclear fuel cycle from ore to wastes , 1996 .

[35]  C. Apostolidis,et al.  Advanced aqueous reprocessing in P&T strategies: Process demonstrations on genuine fuels and targets , 2004 .

[36]  K. M. Goff,et al.  A Description of the Ceramic Waste Form Production Process from the Demonstration Phase of the Electrometallurgical Treatment of EBR-II Spent Fuel , 2001 .

[37]  Michele A. Lewis,et al.  Incorporation of radionuclides from the electrometallurgical treatment of spent fuel into a ceramic waste form. , 1999 .

[38]  T. Flament,et al.  DEVELOPMENT OF VITRIFICATION PROCESS AND GLASS FORMULATION FOR NUCLEAR WASTE CONDITIONING , 2002 .

[39]  J. J. Laidler,et al.  Lab-scale demonstration of the UREX+1a process using spent nuclear fuel. , 2007 .

[40]  Michael F. Simpson,et al.  DEVELOPMENT OF ELECTROREFINER WASTE SALT DISPOSAL PROCESS FOR THE EBR- II SPENT FUEL TREATMENT PROJECT , 2008 .

[41]  R. W. Cahn.  Progress in nuclear energy: Series IV, technology, engineering and safety. — volume 3 , 1961 .

[42]  Materials Section,et al.  Spent fuel reprocessing options , 2008 .

[43]  J. Laidler.  An overview of spent fuel processing in the global nuclear energy partnership. , 2008 .

[44]  B. R. Westphal,et al.  ON THE DEVELOPMENT OF A DISTILLATION PROCESS FOR THE ELECTROMETALLURGICAL TREATMENT OF IRRADIATED SPENT NUCLEAR FUEL , 2008 .