Miniaturized biocompatible microstrip antenna using genetic algorithm

Biocompatible antennas are an area of recent research that can facilitate remote communication with medical implants. This paper shows several possible designs of a "waffle-type" antenna created using genetic algorithms (GAs) that are of a size potentially suitable for cardiac pacemakers in the 402-405 MHz MICS band. In addition, methods to constrain the simulation and speed up the convergence of the GA for this type of antenna are explored. Even simple constraints such as fixing the feed and ground locations and encouraging the antenna to grow preferentially in the horizontal direction to take advantage of the longer physical dimensions of a pacemaker in that direction can appreciably improve convergence speed. One exception to this was constraining the patches to be connected together rather than distributed randomly, which caused the system to converge slower rather than faster. Also notable was that when a larger physical size was allowed, the system also converged more quickly despite a sizeable increase in the number of unknowns (subpatches) in the model. Thus, this paper provides a smaller, better matched microstrip antenna for biotelemetry and a choice of GA constraints for designing it.

[1]  Stephen P. Boyd,et al.  Simple accurate expressions for planar spiral inductances , 1999, IEEE J. Solid State Circuits.

[2]  Cameron T. Charles,et al.  ELECTRICAL COMPONENTS FOR A FULLY IMPLANTABLE NEURAL RECORDING SYSTEM , 2003 .

[3]  S. Stuchly,et al.  Design of microstrip antennas covered with a dielectric layer , 1982 .

[4]  C.M. Furse,et al.  Design of implantable microstrip antenna for communication with medical implants , 2004, IEEE Transactions on Microwave Theory and Techniques.

[5]  Odile Picon,et al.  Creation of new shapes for resonant microstrip structures by means of genetic algorithms , 1997 .

[6]  Cynthia Furse.  Design An Antenna For Pacemaker Communication Computer optimization helps develop an antenna that is small enough to fit on a pacemaker battery pack , 2000 .

[7]  Y. Rahmat-Samii,et al.  Implanted antennas inside a human body: simulations, designs, and characterizations , 2004, IEEE Transactions on Microwave Theory and Techniques.

[8]  Hao Ling,et al.  Shape optimisation of broadband microstrip antennas using genetic algorithm , 2000 .

[9]  John L. Volakis,et al.  Designing broad-band patch antennas using the sequential quadratic programming method , 1997 .

[10]  C. Yue,et al.  On-chip Spiral Inductors With Patterned Ground Shields For Si-based RF IC's , 1997, Symposium 1997 on VLSI Circuits.

[11]  James D. Weiland,et al.  Thermal elevation in the human eye and head due to the operation of a retinal prosthesis , 2004, IEEE Transactions on Biomedical Engineering.

[12]  M. A. Stuchly,et al.  Microstrip Loop Radiators for Medical Applications , 1982 .

[13]  Dickey Arndt,et al.  Microwave antenna design for myocardial tissue ablation applications , 1995, IEEE Antennas and Propagation Society International Symposium. 1995 Digest.