SMA Microvalves for Very Large Gas Flow Control Manufactured Using Wafer-Level Eutectic Bonding

This paper presents a novel gas microvalve design concept, in which a flow control gate is opened by a pneumatic pressure and closed by a shape memory alloy actuator, allowing large flow control. Two different design variations were fabricated using a novel wafer-level Au-Si eutectic bonding process for TiNi to silicon integration. The resulting microvalves demonstrate a record pneumatic performance per footprint area; a microvalve with a footprint of only 1 3.3 mm2 successfully controls a flow difference of 3100 sccm at a pressure drop of 70 kPa using a power of 0.35 W.

[1]  Peter J. Hesketh,et al.  A bistable electromagnetically actuated rotary gate microvalve , 2008 .

[2]  Yong Qing Fu,et al.  TiNi-based thin films in MEMS applications: a review , 2004 .

[3]  Peter Enoksson,et al.  A high-stroke, high-pressure electrostatic actuator for valve applications , 2002 .

[4]  M. Despont,et al.  Transfer bonding technology for batch fabrication of SMA microactuators , 2008 .

[5]  Dominiek Reynaerts,et al.  Wafer-level mechanical and electrical integration of SMA wires to silicon MEMS using electroplating , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[6]  G. Stemme,et al.  Out-of-Plane Knife-Gate Microvalves for Controlling Large Gas Flows , 2006, Journal of Microelectromechanical Systems.

[7]  Alberto Bellini,et al.  Mechatronic Design of a Shape Memory Alloy Actuator for Automotive Tumble Flaps: A Case Study , 2009, IEEE Transactions on Industrial Electronics.

[8]  Manfred Kohl,et al.  Shape Memory Microactuators , 2004 .

[9]  K. Wise,et al.  Low-temperature silicon wafer-to-wafer bonding using gold at eutectic temperature , 1994 .

[10]  R. P. Taylor,et al.  A piezoelectric microvalve for cryogenic applications , 2007 .

[11]  G. Stemme,et al.  Wafer-level integration of NiTi shape memory alloy wires for the fabrication of microactuators using standard wire bonding technology , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[12]  G. Stemme,et al.  Wafer-Scale Manufacturing of Bulk Shape-Memory-Alloy Microactuators Based on Adhesive Bonding of Titanium–Nickel Sheets to Structured Silicon Wafers , 2009, Journal of Microelectromechanical Systems.

[13]  G. Stemme,et al.  A seat microvalve nozzle for optimal gas flow capacity at large controlled pressure , 2004, 17th IEEE International Conference on Micro Electro Mechanical Systems. Maastricht MEMS 2004 Technical Digest.

[14]  Dorian Liepmann,et al.  Fabrication of a Free Floating Silicon Gate Valve , 1999, Micro-Electro-Mechanical Systems (MEMS).

[15]  J. Barth,et al.  A bistable shape memory microvalve , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[16]  Takayuki Shibata,et al.  Flash-evaporated TiNiCu thick film for shape memory alloy micro actuator , 2009 .

[17]  E. Makino,et al.  Thin Film Shape Memory Alloy Microactuators , 2001 .

[18]  Peter J. Hesketh,et al.  Microvalve for Fuel Cells and Miniature Gas Chromatographic System , 2003 .

[19]  J. Van Humbeeck,et al.  Shape Memory Alloys: A Material and a Technology , 2001 .

[20]  G. Stemme,et al.  Design and Wafer-Level Fabrication of SMA Wire Microactuators on Silicon , 2010, Journal of Microelectromechanical Systems.

[21]  Chang-Hyeon Ji,et al.  A piezoelectrically-driven high flow rate axial polymer microvalve with solid hydraulic amplification , 2008, 2008 IEEE 21st International Conference on Micro Electro Mechanical Systems.

[22]  Kei Kuwabara,et al.  Surface Cleaning of Gold Structure by Annealing during Fabrication of Microelectromechanical System Devices , 2009 .

[23]  A.P. Pisano,et al.  Low-Leakage micro gate valves , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[24]  Chong H. Ahn,et al.  Institute of Physics Publishing Journal of Micromechanics and Microengineering a Review of Microvalves , 2022 .

[25]  K. Takahata,et al.  Frequency-controlled wireless shape-memory-alloy microactuators integrated using an electroplating bonding process , 2010 .