Coupled Vortex-Lattice Flight Dynamic Model with Aeroelastic Finite-Element Model of Flexible Wing Transport Aircraft with Variable Camber Continuous Trailing Edge Flap for Drag Reduction

This paper presents a coupled vortex-lattice flight dynamic model with an aeroelastic finite-element model to predict dynamic characteristics of a flexible wing transport aircraft. The aircraft model is based on NASA Generic Transport Model (GTM) with representative mass and stiffness properties to achieve a wing tip deflection about twice that of a conventional transport aircraft (10% versus 5%). This flexible wing transport aircraft is referred to as an Elastically Shaped Aircraft Concept (ESAC) which is equipped with a Variable Camber Continuous Trailing Edge Flap (VCCTEF) system for active wing shaping control for drag reduction. A vortex-lattice aerodynamic model of the ESAC is developed and is coupled with an aeroelastic finite-element model via an automated geometry modeler. This coupled model is used to compute static and dynamic aeroelastic solutions. The deflection information from the finite-element model and the vortex-lattice model is used to compute unsteady contributions to the aerodynamic force and moment coefficients. A coupled aeroelastic-longitudinal flight dynamic model is developed by coupling the finite-element model with the rigid-body flight dynamic model of the GTM.

[1]  Nhan Nguyen,et al.  Aeroelastic Modeling of Elastically Shaped Aircraft Concept via Wing Shaping Control for Drag Reduction , 2012 .

[2]  I. Abel,et al.  An analytical technique for predicting the characteristics of a flexible wing equipped with an active flutter-suppression system and comparison with wind-tunnel data , 1979 .

[3]  Theodore Theodorsen,et al.  Mechanism of flutter: A theoretical and experimental investigation of the flutter problem , 1938 .

[4]  Steven L. Brunton,et al.  Empirical state-space representations for Theodorsen's lift model , 2013 .

[5]  Dewey H. Hodges,et al.  Introduction to Structural Dynamics and Aeroelasticity , 2002 .

[6]  Moffett Field,et al.  Elastically Shaped Wing Optimization and Aircraft Concept for Improved Cruise Efficiency , 2013 .

[7]  Nhan T. Nguyen,et al.  Development of Variable Camber Continuous Trailing Edge Flap System , 2012 .

[8]  John C. Houbolt,et al.  Differential equations of motion for combined flapwise bending, chordwise bending, and torsion of twisted nonuniform rotor blades , 1957 .

[9]  M. Berger,et al.  Robust and efficient Cartesian mesh generation for component-based geometry , 1998 .

[10]  Christine M. Belcastro,et al.  Development of a Dynamically Scaled Generic Transport Model Testbed for Flight Research Experiments , 2004 .

[11]  Ilhan Tuzcu,et al.  Nonlinear Aeroelasticity of a Flexible Wing Structure Coupled with Aircraft Flight Dynamics , 2012 .

[12]  Eric Ting,et al.  A Mission-Adaptive Variable Camber Flap Control System to Optimize High Lift and Cruise Lift-to-Drag Ratios of Future N+3 Transport Aircraft , 2013 .

[13]  Nhan Nguyen,et al.  Integrated Flight Dynamic Modeling of Flexible Aircraft with Inertial Force-Propulsion-Aeroelastic Coupling , 2008 .

[14]  Nhan Nguyen,et al.  NASA Innovation Fund 2010 Project Elastically Shaped Future Air Vehicle Concept , 2010 .

[15]  L. R. Miranda,et al.  A generalized vortex lattice method for subsonic and supersonic flow applications , 1977 .