Improved thermoelectric performance of a film device induced by densely columnar Cu electrode

In this study, it was found that the columnar Cu film is similar as a parallel microchannel which can create some sort of channels for the easy transport of electrons and phonons in the device. The p-Bi0.5Sb1.5Te3, n-Bi2Se0.3Te2.7 and Cu films were fabricated by a magnetron sputtering method. These films have been integrated into low-dimension cross-plane devices using mask-assisted deposition technology. The performance of the micro-device with densely columnar Cu film electrode has been tested, which was very superior to that of the device with ordinary structure electrode. For the typical device with 98 pairs of p/n couples, the output voltage and maximum power were up to 120.5 mV and 145.2 μW, respectively, for a temperature difference of 4 K. The device could produce a 14.6 K maximum temperature difference at current of 160 mA. The response time to reach the steady condition was less than 2 S. The results prove that excellent performance of micro-device can be realized by integrating the densely columnar Cu electrode.

[1]  R. P. Tye,et al.  Thermal Conductivity Measurement of Submicron-Thick Films Deposited on Substrates by Modified ac Calorimetry (Laser-Heating Ångstrom Method) , 2001 .

[2]  P. Conway,et al.  Evolution of microstructure and electrical conductivity of electroless copper deposits on a glass substrate , 2012 .

[3]  Minyoung Kim,et al.  Thermoelectric Power Generation Characteristics of a Thin-Film Device Consisting of Electrodeposited n-Bi2Te3 and p-Sb2Te3 Thin-Film Legs , 2013, Journal of Electronic Materials.

[4]  Xiaolong Gou,et al.  A dynamic model for thermoelectric generator applied in waste heat recovery , 2013 .

[5]  Byeong Kwon Ju,et al.  Fabrication of Bismuth Telluride-Based Alloy Thin Film Thermoelectric Devices Grown by Metal Organic Chemical Vapor Deposition , 2009 .

[6]  M. Kaviany,et al.  Fabrication and measured performance of a first-generation microthermoelectric cooler , 2005, Journal of Microelectromechanical Systems.

[7]  Cheng-Ting Hsu,et al.  Experiments and simulations on low-temperature waste heat harvesting system by thermoelectric power generators , 2011 .

[8]  Yao Wang,et al.  Finite element analysis of miniature thermoelectric coolers with high cooling performance and short response time , 2013, Microelectron. J..

[9]  K. Goodson,et al.  Impact of contact resistances on the low-dimensional scaling of thermoelectric energy conversion devices , 2007, 2007 26th International Conference on Thermoelectrics.

[10]  Byung Jin Cho,et al.  Thermoelectric properties of P-type Sb2Te3 thick film processed by a screen-printing technique and a subsequent annealing process , 2014 .

[11]  Jim Bierschenk,et al.  Optimized thermoelectrics for energy harvesting applications , 2008 .

[12]  T. Harman,et al.  Measurement of Thermal Conductivity by Utilization of the Peltier Effect , 1959 .

[13]  Rama Venkatasubramanian,et al.  Large external ΔT and cooling power densities in thin-film Bi2Te3-superlattice thermoelectric cooling devices , 2006 .

[14]  I-Yu Huang,et al.  Development of low-cost micro-thermoelectric coolers utilizing MEMS technology , 2008 .

[15]  Weimin Gao,et al.  Experiment on thermal uniformity and pressure drop of exhaust heat exchanger for automotive thermoelectric generator , 2013 .

[16]  Luca Francioso,et al.  Flexible thermoelectric generator for ambient assisted living wearable biometric sensors , 2011 .

[17]  Yuan Deng,et al.  Oriented growth of A2Te3 (A = Sb, Bi) films and their devices with enhanced thermoelectric performance , 2011 .

[18]  Ravi Mahajan,et al.  On-chip cooling by superlattice-based thin-film thermoelectrics. , 2009, Nature nanotechnology.

[19]  W. Shin,et al.  Planar-type thermoelectric micro devices using ceramic catalytic combustor , 2011 .

[20]  Jing-Hui Meng,et al.  Transient modeling and dynamic characteristics of thermoelectric cooler , 2013 .

[21]  Ali Shakouri,et al.  SiGeC/Si superlattice microcoolers , 2001 .

[22]  Hiroshi Tsukamoto,et al.  Fabrication and characterization of bismuth–telluride-based alloy thin film thermoelectric generators by flash evaporation method , 2007 .

[23]  M. Tan,et al.  Improved performance of thermoelectric micro-device by integrating a layered Bi2Te3 film , 2013 .

[24]  R. Venkatasubramanian,et al.  Thin-film thermoelectric devices with high room-temperature figures of merit , 2001, Nature.

[25]  G. J. Snyder,et al.  Thermoelectric microdevice fabricated by a MEMS-like electrochemical process , 2003, Nature materials.

[26]  Ali Shakouri,et al.  Design and characterization of thin film microcoolers , 2001 .