An Electrothermally-Actuated Bistable MEMS Relay for Power Applications

This thesis first develops a bistable mechanism that does not rely on internal stress or hinges for its bistability, which is then combined with transient electrothermal actuation and contact structure to develop a MEMS relay for power switching. The relay components, fabricated by a through etch of a silicon wafer using deep reactive ion etch (DRIE), move laterally in the plane of the wafer. The synthesis, analysis, design, fabrication and testing of the relay are all described in this thesis. The bistable mechanism comprises two parallel cosine curved clamped-clamped beams that are also clamped together at their centers. If designed properly it exhibits a second stable deflected shape that is nearly a mirror image of its as-fabricated shape mirrored through the centerline connecting its clamped ends. Both theoretical and finite-element analyses are applied to the modeling, design and optimization of the force-displacement characteristic of the curved beam mechanism. The analyses results agree well with experimental measurement after accounting for fabrication variations. If fabricated properly, the mechanism is mechanically robust; some mechanisms have been switched between their bistable states one million times without sign of failure. The bistable mechanism is combined with two contacts to form a crossbar relay. The contact structure is designed with flat shape and additional compliance; and proper metalization process is developed for its DRIE etched sidewalls; both contributing to a more reliable and low resistance contact. Because of bistability this relay requires no actuation power in either its on or off states. Therefore, transient electrothermal actuators to switch its states are designed, partially with a mechanical model developed for cantilevers subjected to both lateral and axial forces. These actuators typically require 1-ms 50-V pulses to switch the relay. In the off state, the relay contacts stand off more than 200 V. In the on state the best relay contacts exhibit a total resistance of 60 mQ and a current carrying capacity of 3 A. The relay can switch at a maximum 5 Hz rate. These characteristics make it a good candidate for power protection applications. Thesis committee: Alexander H. Slocum (Chairman), Professor of Mechanical Engineering Jeffrey H. Lang, Professor of Electrical Engineering Martin A. Schmidt, Professor of Electrical Engineering

[1]  Timothy W. McLain,et al.  Modeling the thermal behavior of a surface-micromachined linear-displacement thermomechanical microactuator , 2002 .

[2]  Jian Li,et al.  An Instrument to Measure the Stiffness of Mems Mechanisms , 2002 .

[3]  M. Ruan,et al.  Latching micro magnetic relays with multistrip permalloy cantilevers , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[4]  J. Qiu,et al.  A centrally-clamped parallel-beam bistable MEMS mechanism , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[5]  Shih-Chia Chang,et al.  Electrostatically actuated copper-blade microrelays , 2002 .

[6]  S. Spearing,et al.  Silicon Strength Testing for Mesoscale Structural Applications , 1998 .

[7]  M. Hoffmann,et al.  All-silicon bistable micromechanical fiber switch based on advanced bulk micromachining , 1999 .

[8]  Nadim Maluf,et al.  An Introduction to Microelectromechanical Systems Engineering , 2000 .

[9]  M. A. Michalicek,et al.  Characterization of electrothermal actuators and arrays fabricated in a four-level, planarized surface-micromachined polycrystalline silicon process , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[10]  Hans Joachim Quenzer,et al.  Bistable microvalve with pneumatically coupled membranes , 1996, Proceedings of Ninth International Workshop on Micro Electromechanical Systems.

[11]  J. Lang,et al.  A high-current electrothermal bistable MEMS relay , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[12]  Dong-il Dan Cho,et al.  Why is (111) Silicon a Better Mechanical Material for MEMS , 2001 .

[13]  Larry L. Howell,et al.  Design of two-link, in-plane, bistable compliant micro-mechanisms , 1999 .

[14]  Mattias Vangbo,et al.  An analytical analysis of a compressed bistable buckled beam , 1998 .

[15]  M. Saif.  On a tunable bistable MEMS-theory and experiment , 2000, Journal of Microelectromechanical Systems.

[16]  Jeffrey H. Lang,et al.  An electrostatically-actuated MEMS switch for power applications , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[17]  Ye Wang,et al.  Low-voltage lateral-contact microrelays for RF applications , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[18]  C. Kim,et al.  A liquid-filled microrelay with a moving mercury microdrop , 1997 .

[19]  Oliver Brand,et al.  Fully integrated magnetically actuated micromachined relays , 1998 .

[20]  Kurt E. Petersen,et al.  Silicon accelerometer with new thermal self-test mechanism , 1992, Technical Digest IEEE Solid-State Sensor and Actuator Workshop.

[21]  K. R. Farmer,et al.  A bistable microrelay based on two-segment multimorph cantilever actuators , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[22]  George C. Verghese,et al.  Principles of Power Electronics , 2023 .