Interrelationships between biological, chemical, and physical processes as an analog to clogging in aquifer storage and recovery (ASR) wells.

Abstract Laboratory columns were used to understand and predict bore clogging issues at a South Australian recycled water aquifer storage and recovery site, before field trials proceeded. The columns were used to study biogeochemical processes resulting from the continuous injection of recycled water into an aquifer matrix. The results showed that despite levels of suspended solids (SS) between 3–4 mg/l in the influent, flow rates (hydraulic conductivities) were maintained at 20–50% of initial flow through three identical columns for a period of 22 days. An initial decline in the hydraulic conductivity ( K ) through the columns was evident early in the experiment, and decreased from 0.78 m/day to 0.062 m/day in the first 7 days of the experiment. This was thought to be due to physical clogging by suspended solids and then biological clogging by biomass accumulation and polysaccharide production at the inflow end of the columns. The physical bioclogging was relieved midway through the experiment due to calcite dissolution mainly at the inlet end of the columns. Calcite reprecipitation at the outflow end of the columns was evident from SEM micrographs.

[1]  Urs von Gunten,et al.  Biogeochemical changes in groundwater-infiltration systems: Column studies , 1993 .

[2]  P. Pavelic,et al.  Well clogging effects determined from mass balances and hydraulic response at a stormwater ASR site , 1998 .

[3]  L. Forney,et al.  Accuracy, Reproducibility, and Interpretation of Fatty Acid Methyl Ester Profiles of Model Bacterial Communities , 1994, Applied and environmental microbiology.

[4]  J. Matsumoto,et al.  Biological clogging of sand and changes of organic constituents during artificial recharge , 1983 .

[5]  N. C. Wardlaw,et al.  Bacterial Fouling in a Model Core System , 1985, Applied and environmental microbiology.

[6]  Philippe C. Baveye,et al.  Microbial Clogging of Saturated Soils and Aquifer Materials: Evaluation of Mathematical Models , 1995 .

[7]  Stewart W. Taylor,et al.  Biofilm growth and the related changes in the physical properties of a porous medium: 1. Experimental investigation , 1990 .

[8]  J. Oberdorfer,et al.  Waste‐Water Injection: Geochemical and Biogeochemical Clogging Processes , 1985 .

[9]  J. Matsumoto,et al.  Effect of infiltration rate on biological clogging and water quality changes during artificial recharge , 1979 .

[10]  Stewart W. Taylor,et al.  Biofilm growth and the related changes in the physical properties of a porous medium: 2. Permeability , 1990 .

[11]  J. Vecchioli.  A Note on Bacterial Growth Around a Recharge Well at Bay Park, Long Island, New York , 1970 .

[12]  Philippe C. Baveye,et al.  Saturated Hydraulic Conductivity Reduction Caused by Aerobic Bacteria in Sand Columns , 1992 .

[13]  Y. Harpaz.  Artificial Ground-Water Recharge by Means of Wells in Israel , 1971 .

[14]  P Vandevivere,et al.  Effect of bacterial extracellular polymers on the saturated hydraulic conductivity of sand columns , 1992, Applied and environmental microbiology.

[15]  S. Zinder,et al.  Decrease of the hydraulic conductivity of sand columns by Methanosarcina barkeri , 1994, World journal of microbiology & biotechnology.

[16]  F. Smith,et al.  COLORIMETRIC METHOD FOR DETER-MINATION OF SUGAR AND RELATED SUBSTANCE , 1956 .

[17]  M. Rebhun,et al.  Clogging and Contamination Processes in Recharge Wells , 1968 .