Deposition of an adherent diamond film on stainless steel using Cr/Cr Al N as an interlayer

[1]  Xiaojun Hu,et al.  Design and optimization of diamond mid-infrared phase shifter , 2021, Functional Diamond.

[2]  E. J. Corat,et al.  Mitigating residual stress of high temperature CVD diamond films on vanadium carbide coated steel , 2021 .

[3]  Cheng‐Chien Wang,et al.  Thickness-controllable diamond films deposited on stainless steel using a Cr/Cr-Si-N interlayer prepared at different N2/Ar flow ratios , 2020 .

[4]  Xiaojun Hu,et al.  High adhesion diamond films deposited on stainless steel by using nanocomposite films with mosaic interface as an interlayer , 2020 .

[5]  Ziyao Yuan,et al.  New multilayered diamond/β-SiC composite architectures for high-performance hard coating , 2020 .

[6]  Xiaojun Hu,et al.  Adherent and smooth diamond film deposited on stainless steel by using AlSiN interlayers , 2019, Applied Surface Science.

[7]  A. Contin,et al.  A novel method to mitigate residual stress in CVD diamond film on steel substrates with a single intermediate layer , 2019, Surface and Coatings Technology.

[8]  Qiaoqin Yang,et al.  CVD deposition of nanocrystalline diamond coatings on implant alloy materials with CrN/Al interlayer , 2018, Surface and Coatings Technology.

[9]  A. Vyas,et al.  Effect of aluminum contents on sputter deposited CrAlN thin films , 2018 .

[10]  Feng Tao,et al.  Low-stress diamond films deposited on stainless steel by a two-step dropped power process in chemical vapor deposition , 2018 .

[11]  Hao Yu,et al.  Thermal oxidation induced high electrochemical activity of boron-doped nanocrystalline diamond electrodes , 2017 .

[12]  Feng Tao,et al.  Sandblasting induced stress release and enhanced adhesion strength of diamond films deposited on austenite stainless steel , 2017 .

[13]  F. Sun,et al.  Sandblasting pretreatment for deposition of diamond films on WC-Co hard metal substrates , 2017 .

[14]  Qiaoqin Yang,et al.  Influence of Al content on diamond nucleation and growth on Fe-Al alloys in CH4-H2 plasma atmosphere , 2016 .

[15]  A. Contin,et al.  Laser cladding of SiC multilayers for diamond deposition on steel substrates , 2016 .

[16]  A. Hoffman,et al.  Diamond film deposition on WC–Co and steel substrates with a CrN interlayer for tribological applications , 2016 .

[17]  Xin Jiang,et al.  One step deposition of highly adhesive diamond films on cemented carbide substrates via diamond/β-SiC composite interlayers , 2015 .

[18]  Qiaoqin Yang,et al.  Deposition of diamond coatings on Fe-based substrates with Al and Al/AlN interlayers , 2015 .

[19]  A. Hoffman,et al.  The influence of deposition temperature on the adhesion of diamond films deposited on WC–Co substrates using a Cr–N interlayer , 2015 .

[20]  S. Chaiyakun,et al.  Growth and characterization of CrAlN thin film deposited by DC reactive co-sputtering , 2015, 2015 International Conference on Science and Technology (TICST).

[21]  Zhiming Yu,et al.  Microstructure evolution of thermal spray WC–Co interlayer during hot filament chemical vapor deposition of diamond thin films , 2015 .

[22]  V. Kundŕat,et al.  A novel Mo-W interlayer approach for CVD diamond deposition on steel , 2015 .

[23]  Zhengbing Qi,et al.  Improved hardness and oxidation resistance for CrAlN hard coatings with Y addition by magnetron co-sputtering , 2014 .

[24]  Qiaoqin Yang,et al.  TEM interfacial characterization of CVD diamond film grown on Al inter-layered steel substrate , 2014 .

[25]  A. Khomich,et al.  The oxidization behavior and mechanical properties of ultrananocrystalline diamond films at high temperature annealing , 2014 .

[26]  Qiaoqin Yang,et al.  Adhesion enhancement of diamond coating on minor Al-modified copper substrate , 2014 .

[27]  A. Hirose,et al.  Direct coating adherent diamond films on Fe-based alloy substrate: the roles of Al, Cr in enhancing interfacial adhesion and promoting diamond growth. , 2013, ACS applied materials & interfaces.

[28]  Hejun Li,et al.  The oxidation behavior and mechanical properties of MoSi2–CrSi2–SiC–Si coated carbon/carbon composites in high-temperature oxidizing atmosphere , 2011 .

[29]  Y. Mai,et al.  Improvement in adhesion of diamond film on Cu substrate with an inlay structured interlayer , 2011 .

[30]  T. Regier,et al.  Ultrathin W-Al dual interlayer approach to depositing smooth and adherent nanocrystalline diamond films on stainless steel. , 2010, ACS applied materials & interfaces.

[31]  A. Hartmaier,et al.  Ab initio investigation of diamond coatings on steel , 2009 .

[32]  Shicai Yang,et al.  Structural and tribological properties of CrTiAlN coatings on Mg alloy by closed-field unbalanced magnetron sputtering ion plating , 2008 .

[33]  N. Ali,et al.  Polycrystalline diamond coatings on steel substrates , 2008 .

[34]  D. Zuo,et al.  Study of the Thermal and Intrinsic Stress of Large Area Diamond Film Prepared by HFCVD , 2008 .

[35]  V. Shklover,et al.  High temperature phase changes and oxidation behavior of Cr–Si–N coatings , 2007 .

[36]  H. Barshilia,et al.  Nanolayered multilayer coatings of CrN/CrAlN prepared by reactive DC magnetron sputtering , 2007 .

[37]  I. Etsion,et al.  Study of the wear behavior and adhesion of diamond films deposited on steel substrates by use of a Cr–N interlayer , 1999 .

[38]  Y. Makino,et al.  Synthesis of pseudobinary Cr-Al-N films with B1 structure by rf-assisted magnetron sputtering method , 1998 .

[39]  Stephanie R. Sails,et al.  Monitoring the quality of diamond films using Raman spectra excited at 514.5 nm and 633 nm , 1996 .

[40]  G. Berg,et al.  Evaluation of PVD nitride coatings, using impact, scratch and Rockwell-C adhesion tests , 1995 .

[41]  E. N. Loubnin,et al.  Diamond deposition on steel with CVD tungsten intermediate layer , 1995 .

[42]  R. Taylor,et al.  Thermal expansion of polycrystalline diamond produced by chemical vapor deposition , 1994 .

[43]  P. Marcus,et al.  Intercomparison of surface analysis of thin aluminium oxide films , 1990 .

[44]  William B. White,et al.  Characterization of diamond films by Raman spectroscopy , 1989 .

[45]  D. Shuttleworth.  Preparation of metal-polymer dispersions by plasma techniques. An ESCA investigation , 1980 .

[46]  L. Alexander,et al.  X-ray diffraction methods in polymer science , 1969 .