论文信息 - Measurement by Tactile Sensor and FEM Analysis of Multi-layered Flexible Model for Skin Diagnosis

Measurement by Tactile Sensor and FEM Analysis of Multi-layered Flexible Model for Skin Diagnosis

This paper addresses measurement with tactile sensor and FEM analysis of multi-layered flexible model for skin diagnosis. In the multi-axial-force MEMS sensor, we evaluated the change of output by contact with the multi-layered flexible object. A test piece similar to human skin consisting of a rigid layer and a flexible layer is prepared. The sensor output depends greatly on the ratio and hardness of the hard layer and the thickness of the flexible layer of the specimen, and the contact surface. Compared with the results of FEM analysis, it is suggested that the difference of the dependence is caused by the constant compressive load applied at the time of shear deformation.

[1] Noma Haruo,et al. Texture Characterization Including Warm/Cool Sensation Using Force-, Light-, and Temperature-Sensitive Micro-electromechamical Systems Sensor , 2017 .

[2] Minoru Noda,et al. Studies on Curvature Deformation Control of Bilayer Cantilever Fabricated by Surface Micromachining of SOI Wafer , 2006 .

[3] Minoru Noda,et al. Fabrication and Basic Characteristics of Multiaxial Tactile Sensor with 3 Cantilevers , 2010 .

[4] Haruo Noma,et al. Crosstalk Reduction of Tactile Sensor Array with Projected Cylindrical Elastomer over Sensing Element , 2011 .

[5] Haruo Noma,et al. Tactile sensor array using microcantilever with nickel–chromium alloy thin film of low temperature coefficient of resistance and its application to slippage detection , 2012 .