Millijoule, high-peak power, narrow-linewidth, sub-hundred nanosecond pulsed fibre Master-Oscillator Power-Amplifier at 1.55 μm

Abstract In the first part of this article we review the challenges associated with erbium–ytterbium doped fibre amplifiers and the design considerations to scale-up the output power and energy using cladding-pumped large-core fibre amplifiers in master-oscillator power-amplifier (MOPA) configuration. Previous results are also given to illustrate this rather successful approach. The second part consists of our latest experimental results with improvements in terms of linewidth and peak power using shorter pulses. Sub-hundred nanosecond pulses with millijoule energy and narrow linewidth were obtained using cascaded fibre amplifiers with large-core fibres. The energy level obtained with such short pulse duration and narrow spectral linewidth is the highest ever reported. System limitations and potential routes for further improvement are also discussed. To cite this article: C. Codemard et al., C. R. Physique 7 (2006).

[1]  Sylvain Girard,et al.  Accurate efficiency evaluation of energy-transfer processes in phosphosilicate Er3+-Yb3+-codoped fibers , 2006 .

[2]  M. Fermann,et al.  Single-mode excitation of multimode fibers with ultrashort pulses. , 1998, Optics letters.

[3]  Y. Jeong,et al.  Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. , 2004, Optics express.

[4]  Johan Nilsson,et al.  High-energy in-fiber pulse amplification for coherent lidar applications. , 2004, Optics letters.

[5]  M. Ibsen,et al.  A 43-W C-band tunable narrow-linewidth erbium-ytterbium codoped large-core fiber laser , 2004, IEEE Photonics Technology Letters.

[6]  J. Nilsson,et al.  Tunable single-frequency ytterbium-sensitized erbium-doped fiber MOPA source with 150 W (51.8 dBm) of output power at 1563 nm , 2005, OFC/NFOEC Technical Digest. Optical Fiber Communication Conference, 2005..

[7]  Christophe A. Codemard,et al.  All-fiber 0.4-mJ high-coherence eye-safe optical source , 2004, SPIE Security + Defence.

[8]  M. Ibsen,et al.  83-W single-frequency narrow-linewidth MOPA using large-core erbium-ytterbium Co-doped fiber , 2004, IEEE Photonics Technology Letters.

[9]  David N. Payne,et al.  111 kW (0.5 mJ) pulse amplification at 1.5 μm using a gated cascade of three erbium‐doped fiber amplifiers , 1993 .

[10]  David J. Richardson,et al.  A 103 W erbium-ytterbium co-doped large-core fiber laser , 2003 .

[11]  Christophe A. Codemard,et al.  All-fiber 1.15-mJ pulsed eye-safe optical source , 2004, SPIE LASE.

[12]  Almantas Galvanauskas,et al.  High-energy and high-peak-power nanosecond pulse generation with beam quality control in 200-microm core highly multimode Yb-doped fiber amplifiers. , 2005, Optics letters.

[13]  T. Imai,et al.  Stimulated Brillouin scattering suppression by means of applying strain distribution to fiber with cabling , 1993 .

[14]  Kazimierz Jędrzejewski,et al.  Yb3+ sensitised Er3+ doped silica optical fibre with ultrahigh transfer efficiency and gain , 1991 .

[15]  David J. Richardson,et al.  Characteristics of Q-switched cladding-pumped ytterbium-doped fiber lasers with different high-energy fiber designs , 2001 .