A numerical model for soldering process in silicon solar cells

Abstract Solar or Photovoltaic (PV) cells are utilized to convert solar energy into electricity through the photovoltaic effect. Although, Silicon solar cell is one of the most prevalent type of solar cells; manufacturing of this type of solar cells especially soldering copper electrodes to the silicon wafer is very challenging. If the soldering parameters are not selected properly, small cracks will be created in silicon layer, and finally, fracture of the solar cell will happen. The goal of the present study is to develop, for the first time, a finite element model to simulate the soldering process in the fabrication of silicon solar cell in which the soldering system is passing over the solar cell to connect the copper electrode to the silicon wafer. The temperature and thermomechanical stress distributions induced in different layers of the cell are extracted. The effects of several parameters such as soldering power, soldering speed, and the thickness of silicon wafer on the temperature and stress distributions are probed. The results show that the silicon layer is the most critical layer in a silicon solar cell during the soldering process which is susceptible to high thermomechanical stresses. It is shown that increasing the soldering system power and decreasing the soldering system speed lead to increase of thermomechanical stresses induced in the silicon wafer. In addition, using thicker silicon wafer can decrease the thermomechanical stresses generated in this layer.

[1]  William H. Coulter,et al.  Using finite element methods and 3D image correlation to model solar cell bowing , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[2]  Chi-ming Lai,et al.  The effects of cracks on the thermal stress induced by soldering in monocrystalline silicon cells , 2014 .

[3]  K. Zweibel,et al.  Basic photovoltaic principles and methods , 1984 .

[4]  Steffen Wiese,et al.  Constitutive behaviour of copper ribbons used in solar cell assembly processes , 2009, EuroSimE 2009 - 10th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems.

[6]  Xuejun Fan,et al.  Mechanics of Microelectronics , 2006 .

[7]  M. Werner,et al.  Shunt types in crystalline silicon solar cells , 2004 .

[8]  M. Green.  Solar Cells : Operating Principles, Technology and System Applications , 1981 .

[9]  P. Hacke,et al.  Bow in screen-printed back-contact industrial silicon solar cells , 2007 .

[10]  Impurity photovoltaic effect in silicon solar cell doped with sulphur: A numerical simulation , 2011 .

[11]  Hee‐eun Song,et al.  Numerical simulation of bowing phenomenon in ultra-thin crystalline silicon solar cells , 2014 .

[12]  Kenji Uchino,et al.  High-Voltage Photovoltaic Effect in PbTiO3-Based Ceramics , 1982 .

[13]  David Moser,et al.  BiPV System Performance and Efficiency Drops: Overview on PV Module Temperature Conditions of Different Module Types , 2014 .

[14]  Ulrich Eitner,et al.  Use of digital image correlation technique to determine thermomechanical deformations in photovoltaic laminates: Measurements and accuracy , 2010 .

[15]  E. A. Chávez-Urbiola,et al.  Solar hybrid systems with thermoelectric generators , 2012 .

[16]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[17]  Andrew A. O. Tay,et al.  Finite element thermal stress analysis of a solar photovoltaic module , 2011, 2011 37th IEEE Photovoltaic Specialists Conference.

[18]  Hans Joachim Möller,et al.  Multicrystalline silicon for solar cells , 2005 .

[19]  Wennie Wang,et al.  Modeling and testing the mechanical strength of solar cells , 2014 .

[21]  M.H.H. Meuwissen,et al.  Conductive adhesives for low-stress interconnection of thin back-contact solar cells , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[22]  R. Brendel,et al.  Aging behaviour of laser welded Al-interconnections in crystalline silicon modules , 2012 .

[23]  Timothy M. Walsh,et al.  Broken metal fingers in silicon wafer solar cells and PV modules , 2013 .