Simplifications and improvements in unified constitutive equations for creep and plasticity—II. Behavior and capabilities of the model

[1]  G. Henshall,et al.  Simplifications and improvements in unified constitutive equations for creep and plasticity—I. Equations development , 1990 .

[2]  Alan K. Miller,et al.  The influence of solutes on flow stress plateaus, with emphasis on back stresses and the development of unified constitutive equations , 1989 .

[3]  A. Miller,et al.  Development of a method for integrating time‐dependent constitutive equations with large, small or negative strain rate sensitivity , 1988 .

[4]  Alan K. Miller,et al.  NONSS: A New Method for Integrating Unified Constitutive Equations Under Complex Histories , 1988 .

[5]  J. Jonas,et al.  Strength of metals and alloys , 1985 .

[6]  H. Oikawa,et al.  Experimental study on the stress range of class I behaviour in the creep of AlMg alloys , 1984 .

[7]  T. Langdon,et al.  An examination of the breakdown in creep by viscous glide in solid solution alloys at high stress levels , 1982 .

[8]  O. Sherby,et al.  The stress and temperature dependence of steady-state flow at intermediate temperatures for pure polycrystalline aluminum , 1980 .

[9]  R. Stang,et al.  Effect of stress reductions on the creep behaviour and subgrain size in aluminum deformed at 573 K , 1979 .

[10]  Alan K. Miller,et al.  A simplified phenomenological model for non-elastic deformation: Predictions of pure aluminum behavior and incorporation of solute strengthening effects , 1978 .

[11]  R. Ayres.  Enhanced ductility in an aluminum-4 Pct magnesium alloy at elevated temperature , 1977 .

[12]  U. F. Kocks.  Laws for Work-Hardening and Low-Temperature Creep , 1976 .

[13]  T. Langdon,et al.  The transition from dislocation climb to viscous glide in creep of solid solution alloys , 1974 .

[14]  E. W. Hart,et al.  Load relaxation studies of polycrystalline high purity aluminium , 1973 .

[15]  P. G McCormigk,et al.  A model for the Portevin-Le Chatelier effect in substitutional alloys , 1972 .

[16]  W. Nix,et al.  The measurement of internal stresses during creep of al and Al-Mg alloys , 1971 .

[17]  B. A. Wilcox,et al.  On serrated yielding and negative strain-rate sensitivity , 1966 .

[18]  A. Sleeswyk.  Slow strain-hardening of ingot iron , 1958 .

[19]  J. E. Dorn,et al.  Activation energies for creep of high-purity aluminum , 1957 .