KOH-based shallow etching for exposing subsurface damage and increasing laser damage resistance of fused silica optical surface

[1]  Hong Liu,et al.  Impact of heat treatment on NBOHC luminescence of OH-containing and H2-impregnated fused silica for deep-ultraviolet applications , 2019, Journal of Luminescence.

[2]  Jin Huang,et al.  Capping a glass thin layer on the etched surface via plasma chemical vapor deposition for improving the laser damage performance of fused silica. , 2019, Optics express.

[3]  Debaditya Choudhury,et al.  Optimisation of ultrafast laser assisted etching in fused silica. , 2018, Optics express.

[4]  K. Juškevičius,et al.  Oxygen plasma etching of fused silica substrates for high power laser optics , 2018, Applied Surface Science.

[5]  Jin Huang,et al.  Effects of combined process of reactive ion etching and dynamic chemical etching on UV laser damage resistance and surface quality of fused silica optics. , 2018, Optics express.

[6]  Bincheng Li,et al.  Correlation between 193nm absorption and photoluminescence-related defects for fused silica materials , 2018 .

[7]  Bincheng Li,et al.  Origins of a damage-induced green photoluminescence band in fused silica revealed by time-resolved photoluminescence spectroscopy , 2017 .

[8]  Jérôme Néauport,et al.  Effects of deep wet etching in HF/HNO3 and KOH solutions on the laser damage resistance and surface quality of fused silica optics at 351 nm. , 2017, Optics express.

[9]  Jin Huang,et al.  Advanced Mitigation Process (AMP) for Improving Laser Damage Threshold of Fused Silica Optics , 2016, Scientific Reports.

[10]  M. Kneissl,et al.  Comparison of fabrication methods for microstructured deep UV multimode waveguides based on fused silica , 2016 .

[11]  Jin Huang,et al.  Reaction ion etching process for improving laser damage resistance of fused silica optical surface. , 2016, Optics express.

[12]  Y. Liu,et al.  Optimum inductively coupled plasma etching of fused silica to remove subsurface damage layer , 2015 .

[13]  P E Miller,et al.  Mitigation of organic laser damage precursors from chemical processing of fused silica. , 2014, Optics express.

[14]  J. Gottmann,et al.  Selective, Laser-Induced Etching of Fused Silica at High Scan-Speeds Using KOH , 2014 .

[15]  Bin Ma,et al.  Damage growth characteristics of different initial damage sites of fused silica under 355 nm small laser beam irradiation , 2014 .

[16]  J Bude,et al.  High fluence laser damage precursors and their mitigation in fused silica. , 2014, Optics express.

[17]  Jin Huang,et al.  Subsurface defects characterization and laser damage performance of fused silica optics during HF-etched process , 2014 .

[18]  Yi-fan Dai,et al.  Combined technique of elastic magnetorheological finishing and HF etching for high-efficiency improving of the laser-induced damage threshold of fused silica optics. , 2014, Applied optics.

[19]  Liu Hongjie,et al.  Subsurface defects of fused silica optics and laser induced damage at 351 nm. , 2013, Optics express.

[20]  Jérôme Néauport,et al.  Green luminescence in silica glass: A possible indicator of subsurface fracture , 2012 .

[21]  R. Salh,et al.  Defect Related Luminescence in Silicon Dioxide Network: A Review , 2011 .

[22]  L. L. Wong,et al.  HF‐Based Etching Processes for Improving Laser Damage Resistance of Fused Silica Optical Surfaces , 2011 .

[23]  Edward I. Moses,et al.  Ignition on the National Ignition Facility: a path towards inertial fusion energy , 2009 .

[24]  O. P. Thakur,et al.  Study of Structural and Electrical Properties of Conventional Furnace and Microwave-Sintered BaZr0.10Ti0.90O3 Ceramics , 2009 .

[25]  T. Suratwala,et al.  The effect of HF/NH4F etching on the morphology of surface fractures on fused silica , 2008 .

[26]  P. Grua,et al.  Progress in the understanding of fracture related laser damage of fused silica , 2007, SPIE Laser Damage.

[27]  P. Miller,et al.  Sub-surface mechanical damage distributions during grinding of fused silica , 2005 .

[28]  Joseph A. Menapace,et al.  The distribution of subsurface damage in fused silica , 2005, SPIE Laser Damage.

[29]  Stavros G. Demos,et al.  Optical defects produced in fused silica during laser-induced breakdown , 2003 .

[30]  M. Martini,et al.  SiO2 : Ge photoluminescence: Detailed mapping of the excitation-emission UV pattern , 1998 .

[31]  Achim Bernhardt,et al.  ISO 11254: an international standard for the determination of the laser-induced damage threshold , 1994, Laser Damage.