A New Approach to Modelling the Drilling Torque in Conventional and Ultrasonic Assisted Deep-Hole Drilling Processes

[1]  Joseph Páez Chávez,et al.  Numerical and experimental studies of stick–slip oscillations in drill-strings , 2017, Nonlinear dynamics.

[2]  B. Vakili Azghandi,et al.  An Experimental Study on Cutting Forces in Ultrasonic Assisted Drilling , 2016 .

[4]  Xiaohua Zhu,et al.  A Literature Review of Approaches for Stick-Slip Vibration Suppression in Oilwell Drillstring , 2014 .

[5]  S. Amini,et al.  Vibration Drilling of Al2024-T6 , 2013 .

[6]  Richard E. DeVor,et al.  Modeling chip-evacuation forces in drilling for various flute geometries , 2003 .

[7]  Tauseef Aized,et al.  Quality improvement of deep-hole drilling process of AISI D2 , 2013 .

[8]  Gary M. Bone,et al.  Thrust force model for vibration-assisted drilling of aluminum 6061-T6 , 2009 .

[9]  Chinmaya R. Dandekar,et al.  Drilling Characteristics of an E-Glass Fabric-Reinforced Polypropylene Composite and an Aluminum Alloy: A Comparative Study , 2007 .

[10]  Richard E. DeVor,et al.  Effect of groove-type chip breakers on twist drill performance , 2003 .

[11]  A. Galip Ulsoy,et al.  Feed, Speed, and Torque Controllers for Drilling , 1996 .

[12]  S. K. Sarangi,et al.  Machinability study of pure aluminium and Al–12% Si alloys against uncoated and coated carbide inserts , 2009 .

[13]  Reimund Neugebauer,et al.  Ultrasonic application in drilling , 2004 .

[14]  Dinghua Zhang,et al.  Chip evacuation force modelling for deep hole drilling with twist drills , 2018, The International Journal of Advanced Manufacturing Technology.

[15]  Robert M. Parkin,et al.  Experimental analysis on autoresonant control of ultrasonically assisted drilling , 2015 .

[16]  Ping Guo,et al.  Reducing cutting force in rotary ultrasonic drilling of ceramic matrix composites with longitudinal-torsional coupled vibration , 2018, Manufacturing Letters.

[17]  Jun Ni,et al.  Chip thickening in deep-hole drilling , 2006 .

[19]  S. Amini,et al.  Built-up edge investigation in vibration drilling of Al2024-T6. , 2014, Ultrasonics.

[20]  Y. S. Tarng,et al.  In-process prediction of corner wear in drilling operations , 2000 .

[22]  Mamoru Mitsuishi,et al.  In-Process Prediction and Prevention of the Breakage of Small Diameter Drills Based on Theoretical Analysis , 1994 .

[24]  Richard E. DeVor,et al.  Modeling chip-evacuation forces and prediction of chip-clogging in drilling , 2002 .

[25]  Mohammad Pervez Mughal,et al.  Deep hole drilling of AISI 1045 via high-speed steel twist drills: evaluation of tool wear and hole quality , 2017 .

[26]  Gary M. Bone,et al.  Burr height model for vibration assisted drilling of aluminum 6061-T6 , 2010 .

[27]  Mohsen Marani Barzani,et al.  Investigation into Effect of Tool Wear on Drilling Force and Surface Finish While Dry Drilling Aluminum 2024 , 2012 .

[28]  Chong Nam Chu,et al.  Prediction of drill failure using features extraction in time and frequency domains of feed motor current , 2008 .

[29]  Richard E. DeVor,et al.  A Mechanistic Model to Predict the Cutting Force System for Arbitrary Drill Point Geometry , 1998 .

[30]  Troy MacAvelia,et al.  Force and torque modelling of drilling simulation for orthopaedic surgery , 2014, Computer methods in biomechanics and biomedical engineering.