Raman Chemical Imaging for Ingredient-specific Particle Size Characterization of Aqueous Suspension Nasal Spray Formulations: A Progress Report

PurposeThis study was conducted to evaluate the feasibility of using Raman chemical imaging (i.e., Raman imaging microspectroscopy) to establish chemical identity, particle size and particle size distribution (PSD) for a representative corticosteroid in aqueous nasal spray suspension formulations.Materials and MethodsThe Raman imaging PSD protocol was validated using polystyrene (PS) microsphere size standards (NIST-traceable). A Raman spectral library was developed for the active and inactive compounds in the formulation. Four nasal sprays formulated with beclomethasone dipropionate (BDP) ranging in size from 1.4 to 8.3 μm were imaged by both Raman and brightfield techniques. The Raman images were then processed to calculate the PSD for each formulation.ResultsWithin each region examined, active pharmaceutical ingredient (API) particles are unambiguously identified and the total number of those particles, particle size and PSD of API free of excipients and PSD of API particles adhered to other excipients are reported.ConclusionsGood statistical agreement is obtained between the reported and measured sizes of the PS microspheres. BDP particles were clearly distinguishable from those of excipients. Raman chemical imaging (RCI) is able to differentiate between and identify the chemical makeup of multiple components in complex BDP sample and placebo mixtures. The Raman chemical imaging method (coupled Raman and optical imaging) shows promise as a method for characterizing particle size and shape of corticosteroid in aqueous nasal spray suspension formulations. However, rigorous validation of RCI for PSD analysis is incomplete and requires additional research effort. Some specific areas of concern are discussed.

[1]  D. F. Steele,et al.  The potential use of raman mapping to investigate in vitro deposition of combination pressurized metered-dose inhalers , 2004, The AAPS Journal.

[2]  Michael D. Morris,et al.  Hyperspectral Raman Line Imaging of an Aluminosilicate Glass , 1998 .

[3]  A. Fujishima,et al.  Two-Dimensional Surface-Enhanced Raman Imaging of a Roughened Silver Electrode Surface with Adsorbed Pyridine and Comparison with AFM Images , 1996 .

[4]  Christopher T. Zugates,et al.  Combining Raman Chemical Imaging and Scanning Electron Microscopy to Characterize Ambient Fine Particulate Matter , 2001 .

[5]  W. W. Daniel.  Applied Nonparametric Statistics , 1979 .

[6]  Peter R. Griffiths,et al.  Handbook of Vibrational Spectroscopy: Chalmers Vibrat 5V Set , 2001 .

[7]  J. Chalmers,et al.  Handbook of vibrational spectroscopy , 2002 .

[8]  Jae S. Lim,et al.  Two-Dimensional Signal and Image Processing , 1989 .

[9]  Derek J. Gardiner,et al.  Line‐scanned micro Raman spectroscopy using a cooled CCD imaging detector , 1990 .

[10]  A Raman microscopy study of stress transfer in high‐performance epoxy composites reinforced with polyethylene fibers , 1992 .

[11]  Patrick J. Treado,et al.  Liquid Crystal Tunable Filter Raman Chemical Imaging , 1996 .

[12]  W. W. Daniel,et al.  Applied Nonparametric Statistics , 1978 .

[13]  K. Booksh,et al.  Multivariate Raman Imaging of Simulated and “Real World” Glass-Reinforced Composites , 1996 .

[14]  R. Pitz,et al.  Single-pulse, simultaneous multipoint multispecies Raman measurements in turbulent nonpremixed jet flames. , 1994, Optics letters.

[15]  Patrick J. Treado,et al.  Chemical Imaging of Thermoplastic Olefin (TPO) Surface Architecture , 1999 .