Laser-induced high-quality etching of fused silica using a novel aqueous medium

Abstract.Laser-induced backside wet etching of fused-silica plates using an aqueous solution of naphthalene-1,3,6-trisulfonic acid trisodium salt (Np(SO3Na)3) is reported. A KrF excimer laser was employed as a light source. The etch rate varied greatly with the concentration of the solution and the laser fluence. For lower concentration solutions, the etch rate increased linearly with laser fluence. For highly concentrated solutions, however, the etch rate increased abruptly at higher fluence. Well-defined line-and-space and grid micropatterns were fabricated using a low etch rate. The etched surface was as flat as the surface of the virgin plates and the etched pattern was free of debris and microcracks. The formation and propagation of shockwaves and bubbles in the solution during the etch process were monitored. High pressure, as well as the high temperature generated by the photothermal process, plays a key role in the etching process.