Effects of discontinuities and technological fluctuations on the RF performance of BGA packages

The presence of discontinuities (e.g., vias, bends...) along a uniform signal path distorts the electromagnetic (EM) field pattern, resulting in signal integrity (SI) effects especially at RF/microwave frequencies. Such effects, which also arise when geometrical and material parameters of components in chips, packages and boards unexpectedly change during the fabrication process, may lead to a degradation of the system performance, if not accounted for at the genesis of the development process. In this work, we examine.the effects of discontinuities and technological fluctuations on the radio frequency (RF) performance of ball grid array (BGA) packages. For this purpose, an equivalent circuit model of the complete signal path' in a BGA package was developed for frequencies up to 25 GHz. The impact of multiple bends and vias on the signal quality was studied using this model. Furthermore, effects of up to 30% variation in material and geometrical parameters of each package component on its electrical characteristics and on the RF performance of the entire package were also critically investigated using the wideband package model. Based on the results of these investigations, design guidelines which can then be applied at the beginning of the development process to reduce cost and time, were deduced.

[1]  M. F. Caggiano,et al.  RF electrical measurements of fine pitch BGA packages , 2001 .

[2]  Ban-Leong Ooi,et al.  High frequency characterization of a chip scale BGA package , 1999, 1999 Asia Pacific Microwave Conference. APMC'99. Microwaves Enter the 21st Century. Conference Proceedings (Cat. No.99TH8473).

[3]  Jichai Jeong,et al.  Electrical characterization of ball grid array packages from S-parameter measurements below 500 MHz , 1998, IEEE 7th Topical Meeting on Electrical Performance of Electronic Packaging (Cat. No.98TH8370).

[4]  K. Asada,et al.  Electrical characterization of a 500 MHz frequency EBGA package , 1998, 2nd 1998 IEMT/IMC Symposium (IEEE Cat. No.98EX225).

[5]  M. F. Caggiano,et al.  Electrical modeling of the chip scale ball grid array package at radio frequencies , 2000 .

[6]  W. Pinello,et al.  Electrical characterization of metal enhanced BGA packages , 1999, 1999 Proceedings. 49th Electronic Components and Technology Conference (Cat. No.99CH36299).

[7]  M. F. Caggiano,et al.  RF electrical measurements of fine pitch BGA packages , 2000, 2000 Proceedings. 50th Electronic Components and Technology Conference (Cat. No.00CH37070).

[8]  A. P. Agrawal,et al.  Electrical characterization of BGA packages , 1997, 1997 Proceedings 47th Electronic Components and Technology Conference.