High-Precision Hysteresis Sensing of the Quartz Crystal Inductance-to-Frequency Converter

A new method for the automated measurement of the hysteresis of the temperature-compensated inductance-to-frequency converter with a single quartz crystal is proposed. The new idea behind this method is a converter with two programmable analog switches enabling the automated measurement of the converter hysteresis, as well as the temperature compensation of the quartz crystal and any other circuit element. Also used is the programmable timing control device that allows the selection of different oscillating frequencies. In the proposed programmable method two different inductances connected in series to the quartz crystal are switched in a short time sequence, compensating the crystal’s natural temperature characteristics (in the temperature range between 0 and 50 °C). The procedure allows for the measurement of the converter hysteresis at various values of capacitance connected in parallel with the quartz crystal for the converter sensitivity setting at selected inductance. It, furthermore, enables the measurement of hysteresis at various values of inductance at selected parallel capacitance (sensitivity) connected to the quartz crystal. The article shows that the proposed hysteresis measurement of the converter, which converts the inductance in the range between 95 and 100 μH to a frequency in the range between 1 and 200 kHz, has only 7 × 10−13 frequency instability (during the temperature change between 0 and 50 °C) with a maximum 1 × 10−11 hysteresis frequency difference.

[1]  Chen Li,et al.  An Insertable Passive LC Pressure Sensor Based on an Alumina Ceramic for In Situ Pressure Sensing in High-Temperature Environments , 2015, Sensors.

[2]  Carlos Morón,et al.  Magnetic Sensor for Building Structural Vibrations , 2014, Sensors.

[3]  J. Gagnepain,et al.  Sensitivity of quartz oscillators to the environment: characterization methods and pitfalls , 1990, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[4]  Yi-Xin Guo,et al.  An Analog-Digital Mixed Measurement Method of Inductive Proximity Sensor , 2015, Sensors.

[5]  Seng-Chi Chen,et al.  Inductive Displacement Sensors with a Notch Filter for an Active Magnetic Bearing System , 2014, Sensors.

[6]  Srinivas Tadigadapa,et al.  Fabrication and performance characteristics of high-frequency micromachined bulk acoustic wave quartz resonator arrays , 2009 .

[7]  Giacomo Langfelder,et al.  Design Criteria of Low-Power Oscillators for Consumer-Grade MEMS Resonant Sensors , 2014, IEEE Transactions on Industrial Electronics.

[8]  Marco Ferrari,et al.  In-liquid sensing of chemical compounds by QCM sensors coupled with high-accuracy ACC oscillator , 2006, IEEE Transactions on Instrumentation and Measurement.

[9]  Chen Li,et al.  Review of Research Status and Development Trends of Wireless Passive LC Resonant Sensors for Harsh Environments , 2015, Sensors.

[10]  Somboon Sangwongwanich,et al.  A Unified PWM Method for Matrix Converters and Its Carrier-Based Realization Using Dipolar Modulation Technique , 2012, IEEE Transactions on Industrial Electronics.

[11]  Antonio Arnau,et al.  A Review of Interface Electronic Systems for AT-cut Quartz Crystal Microbalance Applications in Liquids , 2008, Sensors.

[12]  Goran Stojanovic,et al.  An Ink-Jet Printed Eddy Current Position Sensor , 2013, Sensors.

[13]  Short‐term stability in the intermediate region between quartz crystal oscillation and LC oscillation , 2012 .

[14]  J. Vig,et al.  Long-term aging of oscillators , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[15]  Yen-Shin Lai,et al.  Digital Pulsewidth Modulation Technique for a Synchronous Buck DC/DC Converter to Reduce Switching Frequency , 2012, IEEE Transactions on Industrial Electronics.

[16]  Salvador Sales,et al.  Magnetic actuator based on giant magnetostrictive material Terfenol-D with strain and temperature monitoring using FBG optical sensor , 2016 .

[17]  J. Albert Chiou,et al.  Thermal hysteresis and voltage shift analysis for differential pressure sensors , 2007 .

[18]  Tae Kyu Noh,et al.  Compact and wide range polarimetric strain sensor based on polarization-maintaining photonic crystal fiber , 2014 .

[19]  Karel Jezernik,et al.  New Quartz Oscillator Switching Method for Nano-Henry Range Inductance Measurements , 2012, Sensors.

[20]  J. Brice.  Crystals for quartz resonators , 1985 .

[21]  K. Leang,et al.  Design and Control of a Three-Axis Serial-Kinematic High-Bandwidth Nanopositioner , 2012, IEEE/ASME Transactions on Mechatronics.

[22]  Fred C. Lee,et al.  Analysis and Applications of Parasitic Capacitance Cancellation Techniques for EMI Suppression , 2010, IEEE Transactions on Industrial Electronics.

[23]  J. Rutman.  Characterization of phase and frequency instabilities in precision frequency sources: Fifteen years of progress , 1978, Proceedings of the IEEE.

[24]  Younghoon Cho,et al.  Dual-Mode Double-Carrier-Based Sinusoidal Pulse Width Modulation Inverter With Adaptive Smooth Transition Control Between Modes , 2013, IEEE Transactions on Industrial Electronics.

[25]  M.M. Driscoll.  Oscillator AM-to-FM noise conversion due to the dynamic frequency-drive sensitivity of the crystal resonator , 2008, 2008 IEEE International Frequency Control Symposium.

[26]  Karel Jezernik,et al.  Greatly Improved Small Inductance Measurement Using Quartz Crystal Parasitic Capacitance Compensation , 2010, Sensors.