Parametric Study of Spiral Groove Gas Face Seals

A finite element analysis for the isothermal flow in spiral groove gas face seals is detailed along with a successive approximation method for the iterative solution of the nonlinear Reynolds equation. Zeroth- and first-order pressure fields are calculated for evaluation of the seal opening force and leakage and the axial stiffness and damping force coefficients, respectively. A parametric study shows the static and dynamic force behavior of a baseline SGFS operating with a large pressure ratio. The recommended geometric parameters presented ensure large static stiffness and damping force coefficients while still allowing for low seal leakage rates. A reduction in the power loss and a significant increase in the seal static stiffness coefficient are unique features of thin seal dams. Presented as a Society of Tribologists and Lubrication Engineers Paper at the STLE/ASME Tribology Conference in Orlando, Florida, October 11–13, 1999

[1]  Luis San Andrés,et al.  Effect of Frequency Excitation on Force Coefficients of Spiral Groove Gas Seals , 1999 .

[2]  Luis San Andrés,et al.  Finite element analysis of herringbone groove journal bearings : A parametric study , 1998 .

[3]  Ronald Hendri Michel van der Stegen.  Numerical modelling of self-acting gas lubricated bearings with experimental verification , 1997 .

[4]  N. Zirkelback.  Computational analysis of spiral groove thrust bearings and face seals , 1997 .

[5]  Bernard Tournerie,et al.  Finite element analysis of grooved gas thrust bearings and grooved gas face seals , 1993 .

[6]  V. N. Constantinescu,et al.  On Extending the Narrow Spiral-Groove Theory to Configurations of Interest in Seals , 1992 .

[7]  V. N. Constantinescu,et al.  On the Dynamic Stability of the Spiral-Grooved Gas-Lubricated Thrust Bearing , 1987 .

[8]  E. Dirusso.  Dynamic response of film thickness in spiral-groove face seals , 1985 .

[9]  E. Dirusso.  Dynamic Behavior of Spiral-Groove and Rayleigh-Step Self-Acting Face Seals , 1984 .

[10]  E. Dirusso.  Film thickness measurement for spiral groove and Rayleigh step lift pad self-acting face seals , 1982 .

[11]  A. J. Smalley.  The Narrow Groove Theory of Spiral Grooved Gas Bearings: Development and Application of a Generalized Formulation for Numerical Solution , 1972 .

[12]  M. M. Reddi,et al.  Finite Element Solution of the Steady-State Compressible Lubrication Problem , 1970 .

[13]  V. Castelli,et al.  Performance characteristics of spiral-groove and shrouded Rayleigh step profiles for high-speed noncontacting gas seals. , 1969 .

[14]  D. D. James,et al.  Numerical Analysis of the Gas-Lubricated Spiral-Groove Thrust Bearing-Compressor , 1967 .

[15]  S. B. Malanoski,et al.  The Static and Dynamic Characteristics of the Spiral-Grooved Thrust Bearing , 1965 .