Polythiophene-cellulose composites: synthesis, optical properties and homogeneous oxidative co-polymerization

Abstract Composites of cellulose and conjugated polymers based on oligo- and polythiophene are reported, inspired by the assembly of cellulose and lignin in wood as a composite that survives harsh environmental conditions and meets most complex demands. The regioselectively oligothiophene-substituted cellulose derivatives were synthesized according to a protecting group strategy and used to prepare the polythiophene-cellulose composites through a FeCl3-initiated oxidative co-polymerization with thiophene co-monomers. The optical property of the cellulose derivatives with mono-, bi- and terthiophene moieties at the C-6 position was investigated with ultraviolet-visible (UV-Vis) and circular dichroism (CD) spectroscopy. The UV-Vis absorption spectra exhibited a broad band reflecting the intense π-π* transition within the conjugated oligothiophene side chains, which were greater than those of the corresponding reference monomers owing to their intermolecular π-electron interactions, even in solution. This was also supported by the negative CD band, indicative of cellulosic supramolecular stacking structures in solution. The soluble polythiophene-cellulose composites were prepared by the oxidative co-polymerization of the oligothiophene substituted celluloses with excess 3-hexylthiophene in the presence of FeCl3 as the oxidative initiator. The supplied amount of thiophene co-monomer was crucial for producing large π-conjugated structures and a cross-linked network structure. The soluble composites, with properties, such as electric conductivity, semiconductivity, or photoelectroactivity, were applied for the preparation of thin films which will have to be optimized for the respective application.

[1]  L. Wang,et al.  Conducting Polymer Composite Films with Core−Shell-like Nanostructure Prepared from Terthiophene-Terminated Starburst Poly(n-butyl acrylate) , 2008 .

[2]  Y. Nishio.  Material Functionalization of Cellulose and Related Polysaccharides via Diverse Microcompositions , 2006 .

[3]  E. Reichmanis,et al.  Synthesis of Electroactive Polystyrene Derivatives Para-Substituted with π-Conjugated Oligothiophene via Postgrafting Functionalization , 2011 .

[4]  G. Scholes,et al.  A Water-Soluble pH-Responsive Molecular Brush of Poly(N,N-dimethylaminoethyl methacrylate) Grafted Polythiophene , 2008 .

[5]  A. Heeger,et al.  Semiconducting and Metallic Polymers: The Fourth Generation of Polymeric Materials , 2001, Angewandte Chemie.

[6]  F. Krebs,et al.  Polythiophene by solution processing , 2007 .

[7]  G. Wenz,et al.  Synthesis, control of substitution pattern and phase transitions of 2,3-di-O-methylcellulose. , 2000, Carbohydrate research.

[8]  R. Dixon,et al.  Syringyl lignin biosynthesis is directly regulated by a secondary cell wall master switch , 2010, Proceedings of the National Academy of Sciences.

[9]  G. Sotzing,et al.  Poly(thiophene)s Prepared via Electrochemical Solid-State Oxidative Cross-Linking. A Comparative Study , 2004 .

[10]  Takakazu Yamamoto.  Electrically conducting and thermally stable π-conjugated poly(arylene)s prepared by organometallic processes , 1992 .

[11]  A. Yassar,et al.  Synthesis and Characterization of Poly(thiophenes) Functionalized by Photochromic Spironaphthoxazine Groups , 1995 .

[12]  J. Daub,et al.  Azulene appended cellulose: Synthesis, optical and chiroptical properties, film formation by electrochemical oxidation , 2000 .

[13]  R C Stevens,et al.  Design and synthesis of novel glycopolythiophene assemblies for colorimetric detection of influenza virus and E. coli. , 2000, Bioconjugate chemistry.

[14]  Keita Sakakibara,et al.  Effect of Central Metals in the Porphyrin Ring on Photocurrent Performance of Cellulose Langmuir‐Blodgett Films , 2010 .

[15]  Volker Schmidt,et al.  The effect of three-dimensional morphology on the efficiency of hybrid polymer solar cells. , 2009, Nature materials.

[16]  Jean M. J. Fréchet,et al.  Polymer—Fullerene Composite Solar Cells. , 2008 .

[17]  Alan G. MacDiarmid,et al.  'Synthetic metals': a novel role for organic polymers , 1989, Images of the Twenty-First Century. Proceedings of the Annual International Engineering in Medicine and Biology Society,.

[18]  R. Friend,et al.  High-performance polymer semiconducting heterostructure devices by nitrene-mediated photocrosslinking of alkyl side chains. , 2010, Nature materials.

[19]  Manikandan Jayaraman,et al.  Design, synthesis, and control of conducting polymer architectures: structurally homogeneous poly(3-alkylthiophenes) , 1993 .

[20]  Nataliya V. Roznyatovskaya,et al.  Conducting polymers in chemical sensors and arrays. , 2008, Analytica chimica acta.

[21]  H. Börner,et al.  Oligothiophene Versus β‐Sheet Peptide: Synthesis and Self‐Assembly of an Organic Semiconductor‐Peptide Hybrid , 2009 .

[22]  Keita Sakakibara,et al.  Effect of Fullerene on Photocurrent Performance of 6-O-Porphyrin-2,3-di-O-stearoylcellulose Langmuir-Blodgett Films , 2008 .

[23]  D. Klemm,et al.  Cellulose: fascinating biopolymer and sustainable raw material. , 2005, Angewandte Chemie.

[24]  J. Daub,et al.  Chemistry of porphyrin-appended cellulose strands with a helical structure: spectroscopy, electrochemistry, and in situ circular dichroism spectroelectrochemistry. , 2001, Chemistry.

[25]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[26]  Xu Li,et al.  Understanding Lignification: Challenges Beyond Monolignol Biosynthesis1 , 2010, Plant Physiology.

[27]  R. N. Marks,et al.  Light-emitting diodes based on conjugated polymers , 1990, Nature.

[28]  T. Swager,et al.  Conjugated Polymer‐Based Chemical Sensors , 2000 .

[29]  S. Irie,et al.  Circular dichroism induced by the helical conformations of acylated chitosan derivatives bearing cinnamate chromophores , 2005 .

[30]  Jasna S. Stevanic,et al.  Orientation of the wood polymers in the cell wall of spruce wood fibres , 2009 .

[31]  D. Klemm,et al.  4‐methoxy substituted trityl groups in 6‐O protection of cellulose: Homogeneous synthesis, characterization, detritylation , 1996 .

[32]  E. W. Meijer,et al.  Two-dimensional charge transport in self-organized, high-mobility conjugated polymers , 1999, Nature.

[33]  Gerhard Wegner,et al.  Nanocomposites of hairy-rod macromolecules: Concepts, constructs, and materials , 2003 .

[34]  Gang Li,et al.  Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties. , 2009, Journal of the American Chemical Society.

[35]  Keita Sakakibara,et al.  First Cellulose Langmuir‐Blodgett Films towards Photocurrent Generation Systems , 2007 .

[36]  H. Sirringhaus,et al.  Charge Transport Physics of Conjugated Polymer Field‐Effect Transistors , 2010, Advanced materials.

[37]  J. Reynolds,et al.  Poly(3,4‐ethylenedioxythiophene) and Its Derivatives: Past, Present, and Future , 2000 .

[38]  Kyosti V. Sarkanen,et al.  Lignins : occurrence, formation, structure and reactions , 1971 .

[39]  G. Wegner,et al.  Ultrathin cellulose ether network as a host matrix for alkylthiophene polymerization , 1997 .

[40]  Ingo Burgert,et al.  Cell wall features with regard to mechanical performance. A review COST Action E35 2004–2008: Wood machining – micromechanics and fracture , 2009 .

[41]  Xin-Gui Li,et al.  Interfacial synthesis and widely controllable conductivity of polythiophene microparticles. , 2009, The journal of physical chemistry. B.

[42]  Xiaoniu Yang,et al.  Toward High-Performance Polymer Solar Cells: The Importance of Morphology Control , 2007 .

[43]  Richard D. McCullough,et al.  THE CHEMISTRY OF CONDUCTING POLYTHIOPHENES , 1998 .

[44]  K. Hatada,et al.  Optical Resolving Ability of 3,5-Dimethylphenylcarbamates of Oligosaccharides and Cyclodextrins , 1990 .

[45]  Zhenan Bao,et al.  Soluble and processable regioregular poly(3‐hexylthiophene) for thin film field‐effect transistor applications with high mobility , 1996 .

[46]  Krzysztof Pielichowski,et al.  Recent developments in polyurethane-based conducting composites , 2004 .

[47]  Cuihua Xue,et al.  Post-Polymerization Functionalization Approach for Highly Water-Soluble Well-Defined Regioregular Head-to-Tail Glycopolythiophenes , 2007 .

[48]  M. Berggren,et al.  Regioselective polymerization of 3-(4-octylphenyl)thiophene with FeCl3 , 1994 .

[49]  Keita Sakakibara,et al.  Fabrication of anodic photocurrent generation systems by use of 6-O-dihydrophytylcellulose as a matrix or a scaffold of porphyrins , 2008 .