Chemiluminescence as a condition monitoring method for thermal aging and lifetime prediction of an HTPB elastomer

Abstract Chemiluminescence (CL) has been applied as a condition monitoring technique to assess aging related changes in a hydroxyl-terminated-polybutadiene based polyurethane elastomer. Initial thermal aging of this polymer was conducted between 110 and 50 °C. Two CL methods were applied to examine the degradative changes that had occurred in these aged samples: isothermal “wear-out” experiments under oxygen yielding initial CL intensity and “wear-out” time data, and temperature ramp experiments under inert conditions as a measure of previously accumulated hydroperoxides or other reactive species. The sensitivities of these CL features to prior aging exposure of the polymer were evaluated on the basis of qualifying this method as a quick screening technique for quantification of degradation levels. Both the techniques yielded data representing the aging trends in this material via correlation with mechanical property changes. Initial CL rates from the isothermal experiments are the most sensitive and suitable approach for documenting material changes during the early part of thermal aging.

[1]  M. Celina,et al.  Heterogeneous and homogeneous kinetic analyses of the thermal oxidation of polypropylene , 1995 .

[2]  K. Gillen,et al.  The wear-out approach for predicting the remaining lifetime of materials , 2000 .

[3]  N. Billingham,et al.  Chemiluminescence from oxidation of polypropylene: Some comments on a kinetic approach , 1990 .

[4]  R. Clough,et al.  Remote inhibition of polymer degradation , 2006 .

[5]  J. Verdu,et al.  Chemiluminescence of hydrocarbon polymers , 1987 .

[6]  K. Gillen,et al.  Condition monitoring approaches applied to a polychloroprene cable jacketing material. , 2004 .

[7]  N. Billingham,et al.  Physical spreading of oxidation in solid polypropylene as studied by chemiluminescence , 1993 .

[8]  T. Reitberger,et al.  Chemiluminescence as a tool for polyolefin oxidation studies , 2004 .

[9]  N. Billingham,et al.  A theoretical model for diffusion‐limited oxidation applied to oxidation profiles monitored by chemiluminescence in hydroxy‐terminated polybutadiene , 2000 .

[10]  N. Billingham,et al.  Chemiluminescence from peroxides in polypropylene : II. Luminescence and kinetics of peroxide decomposition , 1997 .

[11]  T. Reitberger,et al.  Thermal oxidation of hydroxyl-terminated polybutadiene rubber I. Chemiluminescence studies , 1999 .

[12]  H. Zweifel.  Stabilization of polymeric materials , 1998 .

[13]  C. A. Russell,et al.  Oxyluminescence of polymers. II. Effect of temperature and antioxidants , 1964 .

[14]  M. Celina,et al.  A heterogeneous model for the thermal oxidation of solid polypropylene from chemiluminescence analysis , 1993 .

[15]  N. Billingham,et al.  Energy transfer and activated chemiluminescence during thermal oxidation of polypropylene: Evidence for chemically induced electron exchange luminescence , 2001 .

[16]  J. Rychlý,et al.  Decomposition of peroxides of oxidised polypropylene studied by the chemiluminescence method , 1981 .

[17]  T. Reitberger,et al.  Thermal oxidation of hydroxyl-terminated polybutadiene rubber. II. Oxidation depth profiles studied by imaging chemiluminescence , 1999 .

[18]  K. Gillen,et al.  Oxygen Permeability Measurements on Elastomers at Temperatures up to 225 °C , 2005 .

[19]  Michael R. Keenan,et al.  Methods for Predicting More Confident Lifetimes of Seals in Air Environments , 2000 .

[20]  N. Billingham,et al.  Chemiluminescence from peroxides in polypropylene. Part I: Relation of luminescence to peroxide content , 1991 .

[21]  N. Billingham,et al.  The kinetic order of decomposition of polymer hydroperoxides assessed by chemiluminescence , 2004 .

[22]  T. Reitberger,et al.  Imaging chemiluminescence analysis— instrumentation and applications , 1991 .

[23]  J. Chien.  Polymer reactions. II. Thermal decomposition of polyethylene hydroperoxide , 1968 .

[24]  Glen A. Russell,et al.  Deuterium-isotope Effects in the Autoxidation of Aralkyl Hydrocarbons. Mechanism of the Interaction of PEroxy Radicals1 , 1957 .

[25]  K. Gillen,et al.  Thermal Degradation Studies of A Polyurethane Propellant Binder , 1999 .

[26]  L. Zlatkevich.  Luminescence techniques in solid-state polymer research , 1989 .

[27]  Robert Bernstein,et al.  Validation of improved methods for predicting long-term elastomeric seal lifetimes from compression stress-relaxation and oxygen consumption techniques. , 2003 .

[28]  Kenneth T. Gillen,et al.  Extrapolation of Accelerated Aging Data - Arrhenius or Erroneous? , 1997 .

[29]  R. Clough,et al.  Initiation of polymer degradation via transfer of infectious species , 2006 .

[30]  G. George,et al.  Hydroperoxide formation in the early stages of polypropylene photo-oxidation , 1991 .

[31]  R. Clough,et al.  Polymer degradation initiated via infectious behavior , 2005 .

[32]  T. Reitberger,et al.  Imaging chemiluminescence technique applied to thermo-oxidation of polymers – possibilities and limitations , 1998 .

[33]  M. Derrick,et al.  Photo-induced chemiluminescence: A sensitive probe of oxidative changes in organic materials , 1993 .

[34]  G. George,et al.  The effect of stabilisers on integrated chemiluminescence in the early stages of polypropylene photo-oxidation , 1991 .

[35]  Mathias Christopher Celina,et al.  Density measurements as a condition monitoring approach for following the aging of nuclear power plant cable materials , 1999 .

[36]  P. Gijsman,et al.  The influence of polymer type, stabilizers and sample geometry on the relationship between chemiluminescence and oxygen uptake , 2001 .

[37]  Kenneth T. Gillen,et al.  An ultrasensitive technique for testing the Arrhenius extrapolation assumption for thermally aged elastomers , 1995 .

[38]  J. Chien,et al.  Polymer reactions. IV. Thermal decomposition of polypropylene hydroperoxides , 1968 .

[39]  L. Zlatkevich.  A chemiluminescence technique for the evaluation of the thermal oxidative stability of polyethylene , 1987 .

[40]  K. Gillen,et al.  Monitoring the condition of thermally aged polymers by NMR relaxation measurements , 2003 .

[41]  I. Blakey,et al.  Simultaneous FTIR emission spectroscopy and chemiluminescence of oxidizing polypropylene: Evidence for alternate chemiluminescence mechanisms , 2001 .

[42]  K. Gillen,et al.  Novel techniques used to assess the ageing of carbon-black-filled materials , 1993 .

[43]  R. Assink,et al.  Correlation of antioxidant depletion and mechanical performance during thermal degradation of an HTPB elastomer , 2006 .

[44]  H. A. Willis,et al.  Fiber-matrix Adhesion of Hydroperoxidized and Corona Discharge Treated Ultra-high Modulus Polyethylene , 1989 .

[45]  R. Assink,et al.  Condition monitoring of a thermally aged hydroxy-terminated polybutadiene (HTPB)/isophorone diisocyanate (IPDI) elastomer by nuclear magnetic resonance cross-polarization recovery times , 2001 .

[46]  Norman C. Billingham,et al.  Polymer Durability: Degradation, Stabilization, and Lifetime Prediction , 1996 .

[47]  K. Gillen,et al.  Accelerated aging and lifetime prediction: Review of non-Arrhenius behaviour due to two competing processes , 2005 .

[48]  S. Hamid.  Handbook of Polymer Degradation , 2000 .