Within the reconstruction of the PETRA booster ring at DESY towards a third generation light source after 2007, damping wigglers will be installed to reduce the emittance to a value of 1 nmrad. Two damping sections in the long straights of PETRA have been assigned to accommodate 20 wigglers in total. The wigglers will be permanent magnet devices with a fixed gap which are surrounded by an iron enclosure to reduce the leakage flux. Each wiggler will provide a damping integral of 4 T2m per segment and generate a synchrotron radiation power of 42 kW. A short one period long prototype has recently been built to prove the magnetic design and study the correction scheme for tuning the pole strength. The wiggler segments will be followed by an SR absorber protecting the downstream quadrupole and successive wiggler segment. The accumulated on-axis power of about 200 kW will be taken up by the final absorber at the damping section end.
[1]
M. Seidel,et al.
The Vacuum System for Petra III
,
2005,
Proceedings of the 2005 Particle Accelerator Conference.
[2]
H. Schulte-Schrepping,et al.
PETRA III: A New High Brilliance Synchrotron Radiation Source at DESY
,
2004
.
[3]
Nmr Probe,et al.
THE NEW VME-BASED SYSTEM FOR MAGNETIC MEASUREMENTS WITH HALL SENSORS
,
2006
.
[4]
W. Decking,et al.
OPTIMIZATION OF LOW EMITTANCE LATTICES FOR PETRA III
,
2004
.
[5]
W. Decking,et al.
BEAM DYNAMICS STUDY FOR PETRA III INCLUDING DAMPING WIGGLERS
,
2004
.