A Novel Method and Mechanism for Micro-Sphere Singularization

The paper presents an innovative mechanism for the singularization of micro-spheres, which can be effectively employed in a diverse range of robotized applications in micro-electronics and micro-mechanics. Many miniaturized devices are currently being developed and consist of different micro-components to be precisely assembled. The demanding product and process requirements can be met by automating the assembly phases, which include sorting and feeding the micro-components. Therefore, accurate, high-throughput, and modular mechanisms and tools able to supply a number of micro-components, or even a single element for the subsequent operations, play a significant role. In this context, this work focused on the development of a novel strategy for separating a single component from an unstructured stock of identical parts, in particular of micro-spheres with diameters of 0.2–1 mm. Suitable expedients were considered to overcome the adhesive effects that can become significant at the micro-scale due to the very small size and low mass of the micro-spheres. The paper describes the operating principle and the actuation strategies of the mechanism. The design and the development of a prototype for singularizing micro-spheres with a diameter of 0.6 mm are thoroughly discussed. Finally, the results of experimental singularization tests demonstrate the method effectiveness and the mechanism performance.

[1]  Veerander P. S. Ghotra,et al.  Automated microinjection of cell-polymer suspensions in 3D ECM scaffolds for high-throughput quantitative cancer invasion screens. , 2012, Biomaterials.

[2]  Giovanni Legnani,et al.  A mini work-cell for handling and assembling microcomponents , 2014 .

[3]  Lianqing Liu,et al.  Scanning superlens microscopy for non-invasive large field-of-view visible light nanoscale imaging , 2016, Nature Communications.

[4]  L. Foxhall.  Introduction: miniaturization , 2015 .

[5]  Sergej Fatikow,et al.  Automated robot-based separation and palletizing of microcomponents , 2011, 2011 IEEE International Symposium on Assembly and Manufacturing (ISAM).

[6]  Alain Delchambre,et al.  Assembly of a Micro Ball-Bearing using a Capillary Gripper and a Microcomponent Feeder , 2008, IPAS.

[7]  M. Porta,et al.  An Electrostatic Sorting Device For Microparts , 2007 .

[8]  Minghui Hong,et al.  Microsphere-coupled scanning laser confocal nanoscope for sub-diffraction-limited imaging at 25 nm lateral resolution in the visible spectrum. , 2014, ACS nano.

[9]  E. Zakel,et al.  Placement and reflow of solder balls for FC, BGA, wafer-level-CSP, optoelectronic components and MEMS by using a new solder jetting method , 2002 .

[10]  Alexander Verl,et al.  Feeding of Small Components Using the Surface Tension of Fluids , 2014, IPAS.

[11]  M. Porta,et al.  An Integrated and Compact Device for Microassembly Exploiting Electrostatic Sorting and Capillary Grasping , 2010 .

[12]  E. Zakel,et al.  Micro ball bumping packaging for wafer level & 3-d solder sphere transfer and solder jetting , 2012, 2012 35th IEEE/CPMT International Electronics Manufacturing Technology Conference (IEMT).

[13]  Christian Brecher,et al.  Manufacturing of Devices for the Parallel Precision Alignment of Multiple Micro Components , 2008, IPAS.

[14]  Gualtiero Fantoni,et al.  A modular contactless feeder for microparts , 2005 .