Measurement of IGBT switching characteristics and loss using coaxial current transformer

Device switching times and switching energy losses are required over a wide range of practical working conditions for successful design of insulated gate bipolar transistor (IGBT) based power converters. This paper presents a cost-effective experimental setup using a co-axial current transformer for measurement of IGBT switching characteristics and switching energy loss. Measurements are carried out on a 50A, 1200V IGBT (SKM50GB123D) for different values of gate resistance, device current and junction temperature. These measurements augment the technical data available in the device datasheet.Short circuit transients are also investigated experimentally under hard switched fault as well as fault under load conditions.

[1]  Thomas A. Lipo,et al.  Co-axial current transformer for test and characterization of high power semiconductor devices under hard and soft-switching , 1999 .

[2]  R. Kerkman,et al.  The effect of circuit parasitic impedance on the performance of IGBTs in voltage source inverters , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[3]  Sibylle Dieckerhoff,et al.  Simple methods to calculate IGBT and diode conduction and switching losses , 2009, 2009 13th European Conference on Power Electronics and Applications.

[4]  Tore Undeland,et al.  Switching characteristics of NPT-IGBT power module at different temperatures , 2010, Proceedings of 14th International Power Electronics and Motion Control Conference EPE-PEMC 2010.