Design and Assessment of Optimized EMI Filters for Avionic Applications

This paper presents a procedure to design EMI filters to reduce the electromagnetic disturbances generated by electrical apparatus used in avionic environment. The method proposed can be useful to save weight and size of the attenuation systems, and keep their effectiveness in agreement with the standard requirements. A design of a set of different filters with different topological characteristics is presented for a case study about an electrical actuator used for an aircraft onboard application. Performances and reliabilities of the attenuation systems are assessed by suitable full compliance experimental tests.

[1]  Alessandro Salvini,et al.  A moving approach for the Vector Hysteron Model , 2016 .

[2]  G. Giglia,et al.  Lightning-current distribution in MV grids interconnected earthing systems , 2017, 2017 IEEE International Conference on Environment and Electrical Engineering and 2017 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe).

[3]  Peter R. Wilson,et al.  Advanced aircraft power electronics systems — The impact of simulation, standards and wide band-gap devices , 2017 .

[4]  M. Pucci,et al.  Experimental comparison of three-phase distributed generation systems based on VOC and DPC control techniques , 2007, 2007 European Conference on Power Electronics and Applications.

[5]  George Bye.  Fly the electric skies , 2017, IEEE Spectrum.

[6]  Alireza Khaligh,et al.  A Comprehensive Design Approach to an EMI Filter for a 6-kW Three-Phase Boost Power Factor Correction Rectifier in Avionics Vehicular Systems , 2017, IEEE Transactions on Vehicular Technology.

[7]  Maria Evelina Mognaschi,et al.  Optimization and measurements of switched reluctance motors exploiting soft magnetic composite , 2018 .

[8]  J. A. Plumer,et al.  Lightning Protection of Aircraft , 1977 .

[9]  Elisa Francomano,et al.  On the distribution of lightning current among interconnected grounding systems in medium voltage grids , 2018 .

[10]  Gianpaolo Vitale,et al.  Design and performance evaluation of a high power density EMI filter for PWM inverter-fed induction motor drives , 2015, 2015 IEEE 15th International Conference on Environment and Electrical Engineering (EEEIC).

[11]  Hari Prasad Rimal,et al.  Robust Lightning Indirect Effect Protection in Avionic Diagnostics: Combining Inductive Blocking Devices With Metal Oxide Varistors , 2018, IEEE Transactions on Industrial Electronics.

[12]  G. Giglia,et al.  Automatic EMI filter design for power electronic converters oriented to high power density , 2018 .

[13]  Antonio Faba,et al.  Vector hysteresis model identification for iron-silicon thin films from micromagnetic simulations , 2016 .

[14]  Tsuyoshi Murata,et al.  {m , 1934, ACML.

[15]  P ? ? ? ? ? ? ? % ? ? ? ? , 1991 .