Ballistic penetration of steel plates
暂无分享,去创建一个
M. Langseth | Kjell Arne Malo | Tore Børvik | Odd Sture Hopperstad | T. Børvik | O. Hopperstad | M. Langseth | K. Malo
[1] N. Jones,et al. Shear and bending response of a rigid plastic circular plate struck transversely by a mass , 1996 .
[2] G. R. Johnson,et al. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .
[3] Samuel J. Brown. Energy Release Protection for Pressurized Systems. Part II: Review of Studies Into Impact/Terminal Ballistics , 1986 .
[4] M. Langseth,et al. The behaviour of square steel plates subjected to a circular blunt ended load , 1992 .
[5] W. Goldsmith,et al. Yawing impact on thin plates by blunt projectiles , 1995 .
[6] G. G. Corbett,et al. Impact loading of plates and shells by free-flying projectiles: A review , 1996 .
[7] Charles E. Anderson,et al. Ballistic impact: the status of analytical and numerical modeling , 1988 .
[8] C. Ruiz,et al. Impact loading of plates — An experimental investigation , 1983 .
[9] S. R. Bodner,et al. Projectile perforation of multi-layered beams☆ , 1979 .
[10] Jonas A. Zukas,et al. High velocity impact dynamics , 1990 .
[11] P. W. Bridgman. Studies in large plastic flow and fracture : with special emphasis on the effects of hydrostatic pressure , 1964 .
[12] J. Chaboche,et al. Mechanics of Solid Materials , 1990 .
[13] R. Hill. The mathematical theory of plasticity , 1950 .
[14] A. Needleman. Material rate dependence and mesh sensitivity in localization problems , 1988 .
[15] C. Ruiz,et al. A comparison of plate perforation models in the sub-ordnance impact velocity range , 1983 .
[16] T. L. Warren,et al. Perforation of aluminum plates with ogive-nose steel rods at normal and oblique impacts , 1996 .
[17] Jean Lemaitre,et al. A Course on Damage Mechanics , 1992 .
[18] E. P. Chen. Numerical Simulation of Shear Induced Plugging in HY100 Steel Plates , 1992 .
[19] James M. Kelly,et al. A phenomenological penetration model of plates , 1983 .
[20] Leonard E. Schwer,et al. Computational techniques for penetration of concrete and steel targets by oblique impact of deformable projectiles , 1991 .
[21] G. R. Johnson,et al. Strain-Rate Effects in Metals at Large Shear Strains , 1983 .
[22] R. L. Woodward,et al. Penetration of targets by flat-ended projectiles , 1976 .
[23] T. W. Ipson,et al. Ballistic Perforation Dynamics , 1963 .
[24] J. Hawkyard,et al. The mean dynamic yield strength of copper and low carbon steel at elevated temperatures from measurements of the “mushrooming” of flat-ended projectiles , 1968 .
[25] J. D. Embury,et al. A model of ductile fracture based on the nucleation and growth of voids , 1981 .
[26] S. R. Bodner,et al. Experimental Investigation of Normal Perforation of Projectiles in Metallic Plates , 1974 .
[27] Werner Golsdmith,et al. Penetration and perforation processes in metal targets at and above ballistic velocities , 1971 .
[28] Werner Goldsmith,et al. Plate perforation phenomena due to normal impact by blunt cylinders , 1984 .
[29] J. A. Zukas,et al. Mechanics of penetration: Analysis and experiment , 1978 .
[30] S. R. Bodner,et al. Dynamic perforation of viscoplastic plates by rigid projectiles , 1983 .
[31] S. R. Bodner,et al. Analysis of the mechanics of perforation of projectiles in metallic plates , 1974 .
[32] Ted Belytschko,et al. A three-dimensional impact-penetration algorithm with erosion , 1987 .
[33] Werner Goldsmith,et al. The mechanics of penetration of projectiles into targets , 1978 .