Simulating the human body's microclimate using automatic coupling of CFD and an advanced thermoregulation model

This study aims to develop an approach to couple a computational fluid dynamics (CFD) solver to the University of California, Berkeley (UCB) thermal comfort model to accurately evaluate thermal comfort. The coupling was made using an iterative JavaScript to automatically transfer data for each individual segment of the human body back and forth between the CFD solver and the UCB model until reaching convergence defined by a stopping criterion. The location from which data are transferred to the UCB model was determined using a new approach based on the temperature difference between subsequent points on the temperature profile curve in the vicinity of the body surface. This approach was used because the microclimate surrounding the human body differs in thickness depending on the body segment and the surrounding environment. To accurately simulate the thermal environment, the numerical model was validated beforehand using experimental data collected in a climate chamber equipped with a thermal manikin. Furthermore, an example of the practical implementations of this coupling is reported in this paper through radiant floor cooling simulation cases, in which overall and local thermal sensation and comfort were investigated using the coupled UCB model.

[1]  Arsen Krikor Melikov,et al.  Impact of personal factors and furniture arrangement on the thermal plume above a sitting occupant , 2012 .

[2]  Rita Streblow,et al.  Prediction of thermal sensation using an optimized 33 node simulation model , 2009 .

[3]  Sabine Hoffmann,et al.  HEAT AND MOISTURE TRANSFER THROUGH CLOTHING , 2009 .

[4]  Fred Bauman,et al.  Thermal comfort in buildings using radiant vs. all-air systems: A critical literature review , 2017 .

[5]  A. Melikov,et al.  Human convective boundary layer and its interaction with room ventilation flow. , 2015, Indoor air.

[6]  A. Melikov,et al.  Air temperature investigation in microenvironment around a human body , 2015 .

[7]  B. W. Jones,et al.  A comprehensive data base for estimatng clothing insulation , 1985 .

[8]  A. Melikov,et al.  Experimental investigation of the human convective boundary layer in a quiescent indoor environment , 2014 .

[9]  A. Melikov,et al.  Interaction of convective flow generated by human body with room ventilation flow: impact on transport of pollution to the breathing zone , 2014 .

[10]  Edward Arens,et al.  Thermal sensation and comfort models for non-uniform and transient environments, part IV: Adaptive neutral setpoints and smoothed whole-body sensation model , 2014 .

[11]  Edward Arens,et al.  Indoor Environmental Quality ( IEQ ) Title A model of human physiology and comfort for assessing complex thermal environments , 2001 .

[12]  S. Tanabe,et al.  Evaluation of thermal comfort using combined multi-node thermoregulation (65MN) and radiation models and computational fluid dynamics (CFD) , 2002 .

[13]  Jan A. J. Stolwijk,et al.  A mathematical model of physiological temperature regulation in man , 1971 .

[14]  Rizwan Ahmed Memon,et al.  Thermal comfort assessment and application of radiant cooling : A case study , 2008 .

[15]  Hui Zhang,et al.  Coupling CFD and Human Body Thermoregulation Model for the Assessment of Personalized Ventilation , 2006 .

[16]  H. Alsaad,et al.  CFD Assessment of Thermal Comfort and Indoor Air Quality Using Ductless Personalized Ventilation , 2017, Building Simulation Conference Proceedings.

[17]  Shuzo Murakami,et al.  Combined simulation of airflow, radiation and moisture transport for heat release from a human body , 2000 .

[18]  K W Tham,et al.  Human convection flow in spaces with and without ventilation: personal exposure to floor-released particles and cough-released droplets. , 2015, Indoor air.

[19]  E. Arens,et al.  Convective and radiative heat transfer coefficients for individual human body segments , 1997, International journal of biometeorology.

[20]  Toshiaki Omori,et al.  Thermal comfort and energy consumption of the radiant ceiling panel system.: Comparison with the conventional all-air system , 1999 .

[21]  Hui Zhang,et al.  Thermal sensation and comfort models for non-uniform and transient environments: Part III: whole-body sensation and comfort , 2009 .

[22]  Paul C. Cropper,et al.  Coupling a Human Thermal Comfort Model with Computational Fluid Dynamics to Predict Thermal Comfort in Naturally Ventilated Environments , 2009 .

[23]  Arsen Krikor Melikov,et al.  Human body micro-environment: The benefits of controlling airflow interaction , 2015 .

[24]  Malcolm J. Cook,et al.  Coupling a model of human thermoregulation with computational fluid dynamics for predicting human–environment interaction , 2010 .

[25]  André Borrmann,et al.  COMFSIM Interaktive Simulation des thermischen Komforts in Innenräumen auf Höchstleistungsrechnern , 2006 .

[26]  Np P. Gao,et al.  Investigating Indoor Air Quality and Thermal Comfort Using a Numerical Thermal Manikin , 2007 .

[27]  B Koelblen,et al.  Thermal sensation models: a systematic comparison , 2017, Indoor air.

[28]  Tong Yang,et al.  Exchange of simulation data between CFD programmes and a multisegmented human thermal comfort model , 2008 .

[29]  C Voelker,et al.  Measuring the human body's microclimate using a thermal manikin. , 2014, Indoor air.

[30]  Hui Zhang,et al.  Considering individual physiological differences in a human thermal model , 2001 .

[31]  Conrad Voelker,et al.  Performance assessment of a ductless personalized ventilation system using a validated CFD model , 2018 .

[32]  Edward Arens,et al.  Thermal sensation and comfort models for non-uniform and transient environments: Part I: local sensation of individual body parts , 2009 .