Measurement of transitional boundary layer on a flat plate using a computational Preston tube method

The development of the transitional boundary layers on a flat plate in uniform and non-uniform incoming flows was experimentally investigated. The mean velocity profiles and the wall shear stresses on a flat plate were measured in the wakes which were generated by circular cylinders and a flat plate ahead of the test plate. A computational Preston tube method (CPM) originally proposed by Nitsche et al. (1983) was adopted and refined to measure the skin friction coefficients in the transitional boundary layer. The CPM was verified as a useful tool to measure the skin-friction over the transitional boundary layer with reasonable accuracy. As the turbulence level in the wakes increased, the starting and ending points of the transition moved progressively upstream. For the same turbulence intensities, the transition was delayed with increase of the length scale. The skin-friction coefficients at the downstream stations in the wake flow were considerably and consistently smaller than the values in the equilibrium turbulent boundary layer of the uniform flow. The transition length for the cases of the plate-wake were shorter than those for the cases of the cylinder-wake as well as the uniform flow.

[1]  K. Dullenkopf,et al.  A Theory for Wake-Induced Transition , 1989 .

[2]  B. J. Abu-Ghannam,et al.  Natural Transition of Boundary Layers—The Effects of Turbulence, Pressure Gradient, and Flow History , 1980 .

[3]  R. P. Dring,et al.  The Effects of Turbulence and Stator/Rotor Interactions on Turbine Heat Transfer: Part I—Design Operating Conditions , 1988 .

[4]  Roddam Narasimha,et al.  Some properties of boundary layer flow during the transition from laminar to turbulent motion , 1958, Journal of Fluid Mechanics.

[5]  Roddam Narasimha,et al.  Transition-zone models for 2-dimensional boundary layers: A review , 1989 .

[6]  W. Szablewski.  Turbulente Grenzschichten in Ablösungsnähe , 1969 .

[7]  M. P. Escudier,et al.  Critique of the computational Preston tube method , 1986 .

[8]  S. V. Patankar,et al.  Simulating Boundary Layer Transition With Low-Reynolds-Number k–ε Turbulence Models: Part 2—An Approach to Improving the Predictions , 1991 .

[9]  H. W. Emmons,et al.  The Laminar-Turbulent Transition in a Boundary Layer-Part I , 1951 .

[10]  Eli Reshotko,et al.  Experimental study of boundary layer transition with elevated freestream turbulence on a heated flat plate , 1991 .

[11]  F. R. Hama.  Boundary Layer characteristics for smooth and rough surfaces , 1954 .

[12]  S. V. Patankar,et al.  Simulating Boundary Layer Transition With Low-Reynolds-Number k–ε Turbulence Models: Part 1—An Evaluation of Prediction Characteristics , 1991 .

[13]  Gregory J. Walker,et al.  Effects of Adverse Pressure Gradients on the Nature and Length of Boundary Layer Transition , 1990 .

[14]  R. P. Dring,et al.  The Effects of Turbulence and Stator/Rotor Interactions on Turbine Heat Transfer: Part II—Effects of Reynolds Number and Incidence , 1988 .

[15]  R. E. Mayle,et al.  The 1991 IGTI Scholar Lecture: The Role of Laminar-Turbulent Transition in Gas Turbine Engines , 1991 .

[16]  H. Schlichting.  Boundary Layer Theory , 1955 .

[17]  A. Savill.  Further progress in the turbulence modelling of by-pass transition , 1993 .

[18]  K. Yajnik,et al.  Experimental Study on the Evolution of a Wall Layer from a Wake , 1992 .

[19]  Gregory J. Walker,et al.  The Role of Laminar-Turbulent Transition in Gas Turbine Engines: A Discussion , 1992 .

[20]  W. Nitsche,et al.  A Computational Preston Tube Method , 1985 .

[21]  F. White.  Viscous Fluid Flow , 1974 .

[22]  P. Libby,et al.  Analysis of Turbulent Boundary Layers , 1974 .

[23]  H.-P. Kreplin,et al.  Application of the surface hof film technique to laminar flow investigations , 1992 .

[24]  F. Champagne.  The fine-scale structure of the turbulent velocity field , 1978, Journal of Fluid Mechanics.

[25]  F. Clauser.  Turbulent Boundary Layers in Adverse Pressure Gradients , 1954 .