Experimental characterization of polyimide torsional hinges for optical scanner

Abstract This paper reports our study results on polyimide hinge characteristics based on direct measurement of its torsional stiffness. Torsional stiffness curves (torque-angular deflection characteristics) with various hinge dimensions were obtained using our preliminary torsional test apparatus. Finite element analysis (FEA), using a multi-load steps static analysis, provided result in good qualitative agreement with experiment. Quantitative disagreement could mainly be attributed to the measurement error and FEA modeling inaccuracy. Frequency response was calculated based on the experimentally obtained stiffness curve, and it was compared with that obtained by experiment using an optical scanner prototype. The results agreed qualitatively, demonstrating that the dynamic behavior can be predicted based on the result from the static torsional test. Although there are remaining issues for accuracy improvement, this experimental torsional test is useful for understanding both static and dynamic behavior of polyimide torsional hinges.

[1]  S. Kaneko,et al.  Monolithic fabrication of flexible film and thinned integrated circuits , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[2]  M. Esashi,et al.  Silicon micromachined two-dimensional galvano optical scanner , 1994 .

[3]  K. Bhosale,et al.  Relaxation of mechanical stress in polyimide films by softbaking , 1996 .

[4]  H. Miyajima,et al.  A durable, shock-resistant electromagnetic optical scanner with polyimide-based hinges , 2001 .

[5]  Kurt E. Petersen,et al.  Silicon Torsional Scanning Mirror , 1980, IBM J. Res. Dev..

[6]  Mark G. Allen,et al.  In situ measurement of mechanical properties of polyimide films using micromachined resonant string structures , 1999 .

[7]  H. Camon,et al.  Fabrication, simulation and experiment of a rotating electrostatic silicon mirror with large angular deflection , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[8]  Hiroshi Miyajima,et al.  A Study on Nonlinear Torsional Characteristics of Polyimide Hinges , 2001 .

[9]  Larry J. Hornbeck.  Digital Light Processing and MEMS: reflecting the digital display needs of the networked society , 1996, Other Conferences.

[10]  Didier Lippens,et al.  Determination of the mechanical properties of thin polyimide films deposited on a GaAs substrate by bulging and nanoindentation tests , 1999 .

[11]  H. Fujita,et al.  A fast, robust and simple 2-D micro-optical scanner based on contactless magnetostrictive actuation , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[12]  Abdelsamie Moet,et al.  The mechanical behaviour of thin polyimide films on a silicon substrate under point loading , 1989 .

[13]  K. Yamada,et al.  A novel asymmetric silicon micro-mirror for optical beam scanning display , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.