Use of segmented constrained layer damping treatment for improved helicopter aeromechanical stability

The use of a special type of smart material, known as segmented constrained layer (SCL) damping, is investigated for improved rotor aeromechanical stability. The rotor blade load-carrying member is modeled using a composite box beam with arbitrary wall thickness. The SCLs are bonded to the upper and lower surfaces of the box beam to provide passive damping. A finite-element model based on a hybrid displacement theory is used to accurately capture the transverse shear effects in the composite primary structure and the viscoelastic and the piezoelectric layers within the SCL. Detailed numerical studies are presented to assess the influence of the number of actuators and their locations for improved aeromechanical stability. Ground and air resonance analysis models are implemented in the rotor blade built around the composite box beam with segmented SCLs. A classic ground resonance model and an air resonance model are used in the rotor-body coupled stability analysis. The Pitt dynamic inflow model is used in the air resonance analysis under hover condition. Results indicate that the surface bonded SCLs significantly increase rotor lead-lag regressive modal damping in the coupled rotor-body system.

[1]  Wei-Hsin Liao,et al.  A new active constrained layer configuration with enhanced boundary actions , 1996 .

[2]  B. Azvine,et al.  Use of active constrained-layer damping for controlling resonant vibration , 1995 .

[3]  Hossein Saberi,et al.  Application of 2GCHAS to the Investigation of Aeromechanical Stability of Hingeless and Bearingless Rotor Helicopters , 1995 .

[4]  Usik Lee,et al.  A finite element for beams having segmented active constrained layers with frequency-dependent viscoelastics , 1996 .

[5]  Inderjit Chopra,et al.  An Analytical Model for a Nonlinear Elastomeric Lag Damper and Its Effect on Aeromechanical Stability in Hover , 1994 .

[6]  Y. Liu,et al.  Non-dimensional parametric study of enhanced active constrained layer damping treatments , 1999 .

[7]  David A. Peters,et al.  Finite-State Induced-Flow Model for Rotors in Hover and Forward Flight , 1989 .

[8]  Kon-Well Wang,et al.  Optimization of enhanced active constrained layer (EACL) treatment on helicopter flexbeams for aeromechanical stability augmentation , 1999 .

[9]  Ronald L. Spangler,et al.  Piezoelectric actuators for helicopter rotor control , 1989 .

[10]  Wei-Hsin Liao,et al.  On the Active-Passive Hybrid Control Actions of Structures With Active Constrained Layer Treatments , 1997 .

[11]  Inderjit Chopra,et al.  Advances in the development of an intelligent helicopter rotor employing smart trailing-edge flaps , 1996 .

[12]  A. Baz,et al.  Optimum Design and Control of Active Constrained Layer Damping , 1995 .

[13]  Inderjit Chopra,et al.  MODELING PIEZOCERAMIC ACTUATION OF BEAMS IN TORSION , 1994 .

[14]  George A. Lesieutre,et al.  Finite element modeling of frequency-dependent material damping using augmenting thermodynamic fields , 1990 .

[15]  Aditi Chattopadhyay,et al.  Rotor vibratory response analysis using smart materials and aeroelastic control , 1999 .

[16]  Zhang Xiao-gu,et al.  Physical Understanding of Helicopter Air and Ground Resonance , 1986 .