Depth imaging in highly scattering underwater environments using time-correlated single-photon counting

This paper presents an optical depth imaging system optimized for highly scattering environments such as underwater. The system is based on the time-correlated single-photon counting (TCSPC) technique and the time-of-flight approach. Laboratory-based measurements demonstrate the potential of underwater depth imaging, with specific attention given to environments with a high level of scattering. The optical system comprised a monostatic transceiver unit, a fiber-coupled supercontinuum laser source with a wavelength tunable acousto-optic filter (AOTF), and a fiber-coupled single-element silicon single-photon avalanche diode (SPAD) detector. In the optical system, the transmit and receive channels in the transceiver unit were overlapped in a coaxial optical configuration. The targets were placed in a 1.75 meter long tank, and raster scanned using two galvo-mirrors. Laboratory-based experiments demonstrate depth profiling performed with up to nine attenuation lengths between the transceiver and target. All of the measurements were taken with an average laser power of less than 1mW. Initially, the data was processed using a straightforward pixel-wise cross-correlation of the return timing signal with the system instrumental timing response. More advanced algorithms were then used to process these cross-correlation results. These results illustrate the potential for the reconstruction of images in highly scattering environments, and to permit the investigation of much shorter acquisition time scans. These algorithms take advantage of the data sparseness under the Discrete Cosine Transform (DCT) and the correlation between adjacent pixels, to restore the depth and reflectivity images.

[1]  Fraser Dalgleish,et al.  Performance considerations for continuous-wave and pulsed laser line scan (LLS) imaging systems , 2010 .

[2]  Linda Mullen,et al.  Suppression of forward-scattered light using high-frequency intensity modulation , 2013 .

[3]  G. Buller,et al.  Ranging and Three-Dimensional Imaging Using Time-Correlated Single-Photon Counting and Point-by-Point Acquisition , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[4]  W. Becker Advanced Time-Correlated Single Photon Counting Techniques , 2005 .

[5]  R. Collins,et al.  Long-range time-of-flight scanning sensor based on high-speed time-correlated single-photon counting. , 2009, Applied optics.

[6]  Alberto Tosi,et al.  Kilometer-range depth imaging using an InGaAs/InP single-photon avalanche diode detector operating at a wavelength of 1550 nm , 2013 .

[7]  G. Buller,et al.  Underwater depth imaging using time-correlated single photon counting , 2015, Sensing Technologies + Applications.

[8]  Aongus McCarthy,et al.  Object Depth Profile and Reflectivity Restoration From Sparse Single-Photon Data Acquired in Underwater Environments , 2016, IEEE Transactions on Computational Imaging.

[9]  Ximing Ren,et al.  Design and Evaluation of Multispectral LiDAR for the Recovery of Arboreal Parameters , 2014, IEEE Transactions on Geoscience and Remote Sensing.

[10]  Aongus McCarthy,et al.  Restoration of intensity and depth images constructed using sparse single-photon data , 2016, 2016 24th European Signal Processing Conference (EUSIPCO).