Towards Thermoconductive, Electrically Insulating Polymeric Composites with Boron Nitride Nanotubes as Fillers

Ultilizing boron nitride nanotubes (BNNTs) as fillers, composites are fabricated with poly(methyl methacrylate), polystyrene, poly(vinyl butyral), or poly(ethylene vinyl alcohol) as the matrix and their thermal, electrical, and mechanical properties are evaluated. More than 20‐fold thermal conductivity improvement in BNNT‐containing polymers is obtained, and such composites maintain good electrical insulation. The coefficient of thermal expansion (CTE) of the BNNT‐loaded polymers is dramatically reduced because of interactions between the polymer chains and the nanotubes. Moreover, the composites possess good mechanical properties, as revealed by Vickers microhardness tests. This detailed study indicates that BNNTs are very promising nanofillers for polymeric composites, allowing the simultaneous achievement of high thermal conductivity, low CTE, and high electrical resistance, as required for novel and efficient heat‐releasing materials.

[1]  Dmitri Golberg,et al.  Boron nitride nanotubes: functionalization and composites , 2008 .

[2]  Ya‐Ping Sun,et al.  Thermal conductivity of ethylene vinyl acetate copolymer/nanofiller blends , 2008 .

[3]  Jie Zheng,et al.  AlN nanorod and nanoneedle arrays prepared by chloride assisted chemical vapor deposition for field emission applications , 2008, Nanotechnology.

[4]  A. Zettl,et al.  A new look at thermal properties of nanotubes , 2007 .

[5]  Shuhua Qi,et al.  Thermal conductivity of boron nitride reinforced polyethylene composites , 2007 .

[6]  C. Xie,et al.  Effect of AlN content on the performance of brominated epoxy resin for printed circuit board substrate , 2007 .

[7]  A. Zettl,et al.  Amine-functionalized boron nitride nanotubes , 2007 .

[8]  C. Rao,et al.  Functionalization and solubilization of BN nanotubes by interaction with Lewis bases , 2007 .

[9]  Quanshui Zheng,et al.  Effects of anisotropy, aspect ratio, and nonstraightness of carbon nanotubes on thermal conductivity of carbon nanotube composites , 2007 .

[10]  C. Zhi,et al.  Boron nitride nanotubes/polystyrene composites , 2006 .

[11]  A. Majumdar,et al.  Isotope effect on the thermal conductivity of boron nitride nanotubes. , 2006, Physical review letters.

[12]  Adriaan S. Luyt,et al.  Thermal, mechanical and electrical properties of copper powder filled low-density and linear low-density polyethylene composites , 2006 .

[13]  Changhong Liu,et al.  Thermal conductivity of nanostructured boron nitride materials. , 2006, The journal of physical chemistry. B.

[14]  Jae Ik Lee,et al.  Enhanced thermal conductivity of polymer composites filled with hybrid filler , 2006 .

[15]  C. Zhi,et al.  Covalent functionalization: towards soluble multiwalled boron nitride nanotubes. , 2005, Angewandte Chemie.

[16]  C. Zhi,et al.  Perfectly dissolved boron nitride nanotubes due to polymer wrapping. , 2005, Journal of the American Chemical Society.

[17]  Masayoshi Ohashi,et al.  Spherical Aluminum Nitride Fillers for Heat‐Conducting Plastic Packages , 2005 .

[18]  Ya‐Ping Sun,et al.  Solubilization of boron nitride nanotubes. , 2005, Chemical communications.

[19]  P. Supancic,et al.  Thermal Conductivity of Platelet‐Filled Polymer Composites , 2004 .

[20]  Igor Krupa,et al.  Electrically and thermally conductive polyethylene/graphite composites and their mechanical properties , 2004 .

[21]  Y. Xiao,et al.  Specific heat and quantized thermal conductance of single-walled boron nitride nanotubes , 2004 .

[22]  Peter J. F. Harris,et al.  Carbon nanotube composites , 2004 .

[23]  P. McEuen,et al.  Thermal transport measurements of individual multiwalled nanotubes. , 2001, Physical review letters.

[24]  Y. Bando,et al.  Synthesis and characterization of ropes made of BN multiwalled nanotubes , 2001 .

[25]  Yi He,et al.  Thermal characterization of an epoxy-based underfill material for flip chip packaging , 2000 .

[26]  G. Pezzotti,et al.  Thermal conductivity of AlN/polystyrene interpenetrating networks , 2000 .

[27]  Ching-Ping Wong,et al.  Thermal conductivity, elastic modulus, and coefficient of thermal expansion of polymer composites filled with ceramic particles for electronic packaging , 1999 .

[28]  John D. Fitz Gerald,et al.  A solid-state process for formation of boron nitride nanotubes , 1999 .

[29]  Y. Bando,et al.  Synthesis of boron nitride nanotubes from carbon nanotubes by a substitution reaction , 1998 .

[30]  H. Ishida,et al.  Very high thermal conductivity obtained by boron nitride-filled polybenzoxazine , 1998 .

[31]  S. Louie,et al.  Stability and Band Gap Constancy of Boron Nitride Nanotubes , 1994 .

[32]  D. Hasselman,et al.  Thermal Conductivity of Boron Carbide–Boron Nitride Composites , 1992 .

[33]  Lawrence E. Nielsen,et al.  Thermal conductivity of particulate-filled polymers , 1973 .

[34]  R. Andrews,et al.  Carbon nanotube polymer composites , 2004 .

[35]  D. Chung,et al.  Carbon black dispersions as thermal pastes that surpass solder in providing high thermal contact conductance , 2003 .

[36]  H. Hassan,et al.  Thermal properties of ceramic-loaded conductive butyl rubber composites , 1995 .