Noise and Vibration Monitoring for Premium Efficiency IE 3 Three-Phase Induction Motors

The paper presents the original SV-100 platform that enables low-cost and very high accuracy determinations of noise and vibration levels. The aim of the proposed platform is to achiev ...

[1]  Gheorghe Scutaru,et al.  Determination of magnetic noise for a 7.5 kW three-phase induction motor fed directly from the grid , 2014, 2014 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).

[2]  Mikhail Tsypkin,et al.  Induction motor condition monitoring: Vibration analysis technique - a twice line frequency component as a diagnostic tool , 2013, 2013 International Electric Machines & Drives Conference.

[3]  Juan Ramón Heredia-Larrubia,et al.  Application of Slope PWM Strategies to Reduce Acoustic Noise Radiated by Inverter-Fed Induction Motors , 2013, IEEE Transactions on Industrial Electronics.

[4]  E. Helerea,et al.  Three-phase squirrel-cage induction motor modal analyses. Theoretical and experimental aspects , 2012, 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).

[5]  G. Narayanan,et al.  Experimental Investigation on the Effect of Advanced Bus-Clamping Pulsewidth Modulation on Motor Acoustic Noise , 2013, IEEE Transactions on Industrial Electronics.

[6]  Bhim Singh,et al.  Investigation of Vibration Signatures for Multiple Fault Diagnosis in Variable Frequency Drives Using Complex Wavelets , 2014, IEEE Transactions on Power Electronics.

[7]  C. J. Novak,et al.  Experimental investigations of noise and vibration in electric machines , 2012, 2012 IEEE Transportation Electrification Conference and Expo (ITEC).

[8]  Lucian Mihet-Popa,et al.  Current Signature Analysis as Diagnosis Media for Incipient Fault Detection , 2007 .

[9]  G. Liuba,et al.  Optimization of startup characteristics of medium power asynchronous motors with short circuit rotor , 2012, 2012 XXth International Conference on Electrical Machines.

[10]  S. L. Nau,et al.  Acoustic noise in induction motors: causes and solutions , 2000, Record of Conference Papers. Industry Applications Society Forty-Seventh Annual Conference. 2000 Petroleum and Chemical Industry Technical Conference (Cat. No.00CH37112).

[11]  Lorand Szabo,et al.  Diagnosis of rolling bearings faults in electric machines through stray magnetic flux monitoring , 2013, 2013 8TH INTERNATIONAL SYMPOSIUM ON ADVANCED TOPICS IN ELECTRICAL ENGINEERING (ATEE).

[12]  O. Biro,et al.  Experimental investigation of the 3D vibrational behaviour of an induction machine , 2012, 2012 XXth International Conference on Electrical Machines.

[13]  Malcolm J. Crocker,et al.  Handbook of noise and vibration control , 2007 .

[14]  Kazufumi Kaneda,et al.  Noiseless variable-speed squirrel-cage induction motor , 1990 .

[15]  Jacek F. Gieras.  Advancements in Electric Machines , 2008 .

[16]  D. Lefebvre,et al.  On Line Current Monitoring and Application of a Residual Method for Eccentricity Fault Detection , 2011 .

[17]  R. Campeanu,et al.  The optimization of the single/two phase induction motor start-up with electronically switched capacitor , 2008, 2008 IEEE International Conference on Automation, Quality and Testing, Robotics.

[18]  K. Natarajan,et al.  Induction motor fault detection and diagnosis by vibration analysis using MEMS accelerometer , 2013, 2013 International Conference on Emerging Trends in Communication, Control, Signal Processing and Computing Applications (C2SPCA).

[19]  G. Rata,et al.  Induction Motor Speed Estimator Using Rotor Slot Harmonics , 2009 .

[20]  Pedro Vicente,et al.  Current-, force-, and vibration-based techniques for induction motor condition monitoring , 2007 .

[21]  K. Rajashekara,et al.  Comparative study of PWM strategies for three-phase open-end winding induction motor drives , 2014, 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA).

[22]  R. Campeanu,et al.  Two Speed Single Phase Induction Motor with Electronically Controlled Capacitance , 2014 .

[23]  Troy D. Graybeal.  The nature of vibration in electric machinery , 1944, Electrical Engineering.

[24]  I. Hirotsuka,et al.  Experimental study of radial distributions of electromagnetic vibration and noise in three-phase squirrel-cage induction motor at no-load , 2008, 2008 International Conference on Electrical Machines and Systems.

[25]  S. P. Verma,et al.  Measurement techniques for vibration and acoustic noise of electrical machines , 1993 .

[27]  S. P. Verma,et al.  Noise and vibrations of electrical machines and drives; their production and means of reduction , 1996, Proceedings of International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth.

[28]  Michel Hecquet,et al.  Prediction of audible magnetic noise radiated by adjustable speed drive induction machines , 2010, 2009 IEEE International Electric Machines and Drives Conference.

[29]  D. Howe,et al.  Improved methods for prediction of electromagnetic noise radiated by electrical machines , 1994 .

[30]  H.B. Ertan,et al.  Comparison of PWM and PFM induction drives regarding audible noise and vibration for household applications , 2004, IEEE Transactions on Industry Applications.

[31]  Sorin Enache,et al.  Operation Characteristics Optimization of Low Power Three-Phase Asynchronous Motors , 2014 .

[32]  I. Vlad,et al.  Aspects regarding optimal design of high power squirrel cage asynchronous motors , 2012, 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).

[33]  Ioan Calin Rosca,et al.  Damping ratio estimation of Three-Phase Induction Motor , 2014, 2014 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).

[34]  Wang Fengxiang,et al.  Analysis of vibration modes for large induction motor , 2005, 2005 International Conference on Electrical Machines and Systems.

[35]  R. Belmans,et al.  Electro-mechanical analysis of the audible noise of inverter-fed squirrel-cage induction motor , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.