Performance evaluation of thin membranes solid oxide fuel cell prepared by pressure-assisted slurry-casting

[1]  K. Yoon,et al.  Electrochemical Performance of Solid Oxide Fuel Cells Manufactured by Single Step Co-firing Process , 2007 .

[2]  Yanhai Du,et al.  Fabrication and characterization of tubular solid oxide fuel cells , 2007 .

[3]  S. Chan,et al.  High-performance (La,Sr ) (Cr,Mn )O3 / (Gd,Ce )O2- δ composite anode for direct oxidation of methane , 2007 .

[4]  Michael B. Pomfret,et al.  In situ studies of fuel oxidation in solid oxide fuel cells. , 2007, Analytical chemistry.

[5]  S. Barnett,et al.  Effect of cathode sheet resistance on segmented-in-series SOFC power density , 2007 .

[6]  Yaohui Zhang,et al.  A study of the process parameters for yttria-stabilized zirconia electrolyte films prepared by screen-printing , 2006 .

[7]  Yaohui Zhang,et al.  Effect of starting powder on screen-printed YSZ films used as electrolyte in SOFCs , 2006 .

[8]  Meilin Liu,et al.  Ni-Ce0.9Gd0.1O1.95 anode for GDC electrolyte-based low-temperature SOFCs , 2004 .

[9]  S. Chan,et al.  Identification of O2 reduction processes at yttria stabilized zirconia|doped lanthanum manganite interface , 2003 .

[10]  K. Kobayashi,et al.  Supported Zr(Sc)O2 SOFCs for reduced temperature prepared by electrophoretic deposition , 2002 .

[11]  S. Hyun,et al.  Preparation of YSZ/YDC and YSZ/GDC composite electrolytes by the tape casting and sol-gel dip-drawing coating method for low-temperature SOFC , 2002 .

[12]  Toru Inagaki,et al.  Performance of intermediate temperature solid oxide fuel cells with La(Sr)Ga(Mg)O3 electrolyte film , 2002 .

[13]  W. L. Worrell,et al.  Fabrication and Performance of Thin-Film YSZ Solid Oxide Fuel Cells , 2001 .

[14]  Xiqiang Huang,et al.  The conductivity of PrGaO3-based perovskite oxides , 2001 .

[15]  Raphaël Ihringer,et al.  Anode supported solid oxide fuel cells with screen-printed cathodes , 2001 .

[16]  D. Perednis,et al.  Fabrication of thin electrolytes for second-generation solid oxide fuel cells , 2000 .

[17]  Jiang Liu.  Study on the properties of YSZ electrolyte made by plaster casting method and the applications in solid oxide fuel cells , 1999 .

[18]  P. Fragnaud,et al.  Preparation of thin film SOFCs working at reduced temperature , 2000 .

[19]  Sangtae Kim,et al.  Oxygen permeation, electrical conductivity and stability of the perovskite oxide La0.2Sr0.8Cu0.4Co0.6O3−x , 1997 .

[20]  R. Donelson,et al.  Electrode supported solid oxide fuel cells: Electrolyte films prepared by DC magnetron sputtering , 1997 .

[21]  Jong Chen,et al.  Metal-organic vapor deposition of YSZ electrolyte layers for solid oxide fuel cell applications , 1997 .

[22]  S. D. Souza.  Thin-film solid oxide fuel cell with high performance at low-temperature , 1997 .

[23]  N. Minh.  Ceramic Fuel Cells , 1993 .

[24]  W. Chu.  Thin- and thick-film solid ionic devices , 1992 .