High-throughput Li plating quantification for fast-charging battery design

[1]  Y. Ye,et al.  Onboard early detection and mitigation of lithium plating in fast-charging batteries , 2022, Nature Communications.

[2]  N. Dasgupta,et al.  Enabling 4C Fast Charging of Lithium‐Ion Batteries by Coating Graphite with a Solid‐State Electrolyte , 2021, Advanced Energy Materials.

[3]  Kai Liu,et al.  Regulating the growth of lithium dendrite by coating an ultra-thin layer of gold on separator for improving the fast-charging ability of graphite anode , 2021, Journal of Energy Chemistry.

[4]  A. Kwade,et al.  Development of an innovative workflow to optimize the fast-charge capability of lithium-ion battery cells , 2021, Journal of Power Sources.

[5]  Gustavo M. Hobold,et al.  Moving beyond 99.9% Coulombic efficiency for lithium anodes in liquid electrolytes , 2021, Nature Energy.

[6]  Qingsong Wang,et al.  Understanding of Li‐plating on graphite electrode: detection, quantification and mechanism revelation , 2021 .

[7]  B. McCloskey,et al.  Detecting onset of lithium plating during fast charging of Li-ion batteries using operando electrochemical impedance spectroscopy , 2021, Cell Reports Physical Science.

[8]  A. Jansen,et al.  3D Detection of Lithiation and Lithium Plating in Graphite Anodes during Fast Charging. , 2021, ACS nano.

[9]  A. Kwade,et al.  Application of the differential charging voltage analysis to determine the onset of lithium-plating during fast charging of lithium-ion cells , 2021 .

[10]  Jiaqi Huang,et al.  The Boundary of Lithium Plating in Graphite Electrode for Safe Lithium-Ion Batteries. , 2021, Angewandte Chemie.

[11]  Eric J. Dufek,et al.  A Review of Existing and Emerging Methods for Lithium Detection and Characterization in Li‐Ion and Li‐Metal Batteries , 2021, Advanced Energy Materials.

[12]  T. Gao,et al.  Interplay of Lithium Intercalation and Plating on a Single Graphite Particle , 2021, Joule.

[13]  Boyang Liu,et al.  Revealing the Role of Fluoride‐Rich Battery Electrode Interphases by Operando Transmission Electron Microscopy , 2021, Advanced Energy Materials.

[14]  Chibueze V. Amanchukwu,et al.  Noninvasive In Situ NMR Study of “Dead Lithium” Formation and Lithium Corrosion in Full-Cell Lithium Metal Batteries , 2020, Journal of the American Chemical Society.

[15]  Andrew M. Colclasure,et al.  Effect of Anode Porosity and Temperature on the Performance and Lithium Plating During Fast‐Charging of Lithium‐Ion Cells , 2020 .

[16]  Marco-Tulio F. Rodrigues,et al.  Apparent Increasing Lithium Diffusion Coefficient with Applied Current in Graphite , 2020 .

[17]  J. Dahn,et al.  Cycling Lithium Metal on Graphite to Form Hybrid Lithium-Ion/Lithium Metal Cells , 2020 .

[18]  Patrick K. Herring,et al.  Machine learning for continuous innovation in battery technologies , 2020, Nature Reviews Materials.

[19]  B. McCloskey,et al.  Detecting the Onset of Lithium Plating and Monitoring Fast Charging Performance with Voltage Relaxation , 2020 .

[20]  Andrew M. Colclasure,et al.  Quantification of Inactive Lithium and Solid–Electrolyte Interphase Species on Graphite Electrodes after Fast Charging , 2020, ACS Energy Letters.

[21]  Eric J. Dufek,et al.  Electrode scale and electrolyte transport effects on extreme fast charging of lithium-ion cells , 2020 .

[22]  Stefano Ermon,et al.  Closed-loop optimization of fast-charging protocols for batteries with machine learning , 2020, Nature.

[23]  Eric J. Dufek,et al.  Electrochemical Quantification of Lithium Plating: Challenges and Considerations , 2019, Journal of The Electrochemical Society.

[24]  Andrew M. Colclasure,et al.  Requirements for Enabling Extreme Fast Charging of High Energy Density Li-Ion Cells while Avoiding Lithium Plating , 2019, Journal of The Electrochemical Society.

[25]  Kristen A. Severson,et al.  Data-driven prediction of battery cycle life before capacity degradation , 2019, Nature Energy.

[26]  Gregory J. Offer,et al.  How Observable Is Lithium Plating? Differential Voltage Analysis to Identify and Quantify Lithium Plating Following Fast Charging of Cold Lithium-Ion Batteries , 2019, Journal of The Electrochemical Society.

[27]  Y. Meng,et al.  Quantifying inactive lithium in lithium metal batteries , 2018, Nature.

[28]  Andrew M. Colclasure,et al.  Resolving the discrepancy in tortuosity factor estimation for Li-Ion battery electrodes through micro-macro modeling and experiment , 2018 .

[29]  K. Gering,et al.  A Critical Evaluation of the Advanced Electrolyte Model , 2018 .

[30]  Shanhai Ge,et al.  A look into the voltage plateau signal for detection and quantification of lithium plating in lithium-ion cells , 2018, Journal of Power Sources.

[31]  Jianqiu Li,et al.  Investigation of Lithium Plating-Stripping Process in Li-Ion Batteries at Low Temperature Using an Electrochemical Model , 2018 .

[32]  H. Gasteiger,et al.  Quantitative and time-resolved detection of lithium plating on graphite anodes in lithium ion batteries , 2017 .

[33]  Moses Ender,et al.  In situ detection of lithium metal plating on graphite in experimental cells , 2015 .

[34]  A. Sastry,et al.  Effects of Fluoroethylene Carbonate (FEC) on Anode and Cathode Interfaces at Elevated Temperatures , 2015 .

[35]  Yunhui Huang,et al.  Nitrogen‐Doped Porous Carbon Nanofiber Webs as Anodes for Lithium Ion Batteries with a Superhigh Capacity and Rate Capability , 2012, Advanced materials.

[36]  S. Trussler,et al.  Precision Measurements of the Coulombic Efficiency of Lithium-Ion Batteries and of Electrode Materials for Lithium-Ion Batteries , 2010 .

[37]  John Newman,et al.  Two-Dimensional Modeling of Lithium Deposition during Cell Charging , 2008 .

[38]  Kang Xu,et al.  Study of the charging process of a LiCoO2-based Li-ion battery , 2006 .

[39]  Ying Shirley Meng,et al.  Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries , 2006, Science.

[40]  Carol S. Woodward,et al.  Enabling New Flexibility in the SUNDIALS Suite of Nonlinear and Differential/Algebraic Equation Solvers , 2020, ACM Trans. Math. Softw..

[41]  John Newman,et al.  Cyclable Lithium and Capacity Loss in Li-Ion Cells , 2005 .

[42]  I. Bloom,et al.  Differential voltage analyses of high-power, lithium-ion cells: 1. Technique and application , 2005 .

[43]  Marc Doyle,et al.  Mathematical Modeling of the Lithium Deposition Overcharge Reaction in Lithium‐Ion Batteries Using Carbon‐Based Negative Electrodes , 1999 .