High-temperature electrostatic chuck for nonvolatile materials dry etch

A high-temperature electrostatic chuck (HT-ESC) for nonvolatile materials dry etch was developed and applied for etching nonvolatile materials used in ferroelectric random-access memory or magnetic random-access memory. The HT-ESC can be heated up to 400°C from room temperature within 40min, and the temperature distribution across a 200mm wafer during chucking is 407±9°C. The HT-ESC generates a clamping pressure of over 1kPa in the temperature range from 250to400°C. According to the results of etching platinum with a standard inductively coupled plasma etcher equipped with the HT-ESC, a measured etching time can be reduced by 41% by heating the sample up to 300°C compared with etching at 40°C. It can thus be concluded that this HT-ESC is suitable for etching nonvolatile materials.