Backscatter calibration of high-frequency multibeam echosounder using a reference single-beam system, on natural seafloor

The calibration of multibeam echosounders for backscatter measurements can be conducted efficiently and accurately using data from surveys over a reference natural area, implying appropriate measurements of the local absolute values of backscatter. Such a shallow area (20-m mean depth) has been defined and qualified in the Bay of Brest (France), and chosen as a reference area for multibeam systems operating at 200 and 300 kHz. The absolute reflectivity over the area was measured using a calibrated single-beam fishery echosounder (Simrad EK60) tilted at incidence angles varying between 0° and 60° with a step of 3°. This reference backscatter level is then compared to the average backscatter values obtained by a multibeam echosounder (here a Kongsberg EM 2040-D) at a close frequency and measured as a function of angle; the difference gives the angular bias applicable to the multibeam system for recorded level calibration. The method is validated by checking the single- and multibeam data obtained on other areas with sediment types different from the reference area.

[1]  J. M. Preston,et al.  Automated acoustic seabed classification of multibeam images of Stanton Banks , 2009 .

[2]  Dezhang Chu,et al.  Protocols for calibrating multibeam sonar. , 2003, The Journal of the Acoustical Society of America.

[3]  Xavier Lurton,et al.  Quantitative characterisation of seafloor substrate and bedforms using advanced processing of multibeam backscatter—Application to Cook Strait, New Zealand , 2011 .

[4]  J. Boucher,et al.  Processing of high-frequency multibeam echo sounder data for seafloor characterization , 2003 .

[5]  Alexandre C. G. Schimel,et al.  Backscatter measurements by seafloor‐mapping sonars: guidelines and recommendations , 2015 .

[6]  Eric Maillard,et al.  Towards a fully calibrated multibeam echosounder , 2012 .

[7]  Daniel Buscombe,et al.  Characterizing riverbed sediment using high‐frequency acoustics: 1. Spectral properties of scattering , 2014 .

[8]  Jean-Marie Augustin,et al.  Analysis of seafloor backscatter strength dependence on the survey azimuth using multibeam echosounder data , 2017, Marine Geophysical Research.

[9]  Peter Gerstoft,et al.  Efficient multibeam sonar calibration and performance evaluation , 2014 .

[10]  A. Amiri-Simkooei,et al.  Improving riverbed sediment classification using backscatter and depth residual features of multi-beam echo-sounder systems. , 2012, The Journal of the Acoustical Society of America.

[11]  A. Amiri-Simkooei,et al.  An inter-comparison of sediment classification methods based on multi-beam echo-sounder backscatter and sediment natural radioactivity data. , 2013, The Journal of the Acoustical Society of America.

[12]  R. Francois,et al.  Sound absorption based on ocean measurements. Part II: Boric acid contribution and equation for total absorption , 1982 .

[13]  T. Weber.  Coastal and Ocean Mapping Center for Coastal and Ocean Mapping 10-16-2015 Observations of Backscatter from Sand and Gravel Seafloors Between 170-250 kHz , 2018 .

[14]  Markus Diesing,et al.  Image-based seabed classification: what can we learn from terrestrial remote sensing? , 2016 .

[15]  D. Simons,et al.  A Bayesian approach to seafloor classification using multi-beam echo-sounder backscatter data , 2009 .

[16]  A. Amiri-Simkooei,et al.  Riverbed sediment classification using multi-beam echo-sounder backscatter data. , 2009, The Journal of the Acoustical Society of America.

[17]  Michael D. Smith,et al.  Toward a standard line for use in multibeam echo sounder calibration , 2018, Marine Geophysical Research.

[18]  H. Überall,et al.  RST analysis of monostatic and bistatic acoustic echoes from an elastic sphere , 1983 .

[19]  T. Weber,et al.  High-resolution calibration of a multibeam echo sounder , 2010 .

[20]  Xavier Lurton,et al.  An Introduction to Underwater Acoustics: Principles and Applications , 2010 .

[21]  E. John Simmonds,et al.  Fisheries Acoustics: Theory and Practice , 2005 .

[22]  Thomas C. Weber,et al.  Calibration of multibeam echo sounders: a comparison between two methodologies , 2012 .

[23]  Luciano E. Fonseca,et al.  Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data , 2007 .

[24]  Christian de Moustier,et al.  Beyond bathymetry: Mapping acoustic backscattering from the deep seafloor with Sea Beam , 1986 .

[25]  P. Blondel,et al.  Boundary influences In high frequency, shallow water acoustics , 2005 .

[26]  Introduction to the Special Issue “Seafloor backscatter data from swath mapping echosounders: from technological development to novel applications” , 2018, Marine Geophysical Research.

[27]  T. Le Bas,et al.  Control of the repeatability of high frequency multibeam echosounder backscatter by using natural reference areas , 2018, Marine Geophysical Research.

[29]  X. Lurton,et al.  A framework to quantify uncertainties of seafloor backscatter from swath mapping echosounders , 2018, Marine Geophysical Research.

[30]  A. Amiri-Simkooei,et al.  Observations regarding coarse sediment classification based on multi-beam echo-sounder's backscatter strength and depth residuals in Dutch rivers. , 2014, The Journal of the Acoustical Society of America.

[31]  Craig J. Brown,et al.  Benthic habitat mapping: A review of progress towards improved understanding of the spatial ecology of the seafloor using acoustic techniques , 2011 .

[32]  K. Foote.  Calibration of acoustic instruments for fish density estimation : a practical guide , 1987 .

[33]  J. Hughes Clarke,et al.  Toward remote seafloor classification using the angular response of acoustic backscattering: a case study from multiple overlapping GLORIA data , 1994 .

[34]  Egil Ona,et al.  Calibration methods for two scientific multibeam systems , 2009 .

[35]  N. Cochrane,et al.  Quantification of a multibeam sonar for fisheries assessment applications. , 2003, The Journal of the Acoustical Society of America.