Shakedown of complex structures according to various hardening rules

Abstract This article is concerned with a review of the literature on shakedown problems of complex structures according to various hardening rules. Although many hardening rules have been developed, shakedown analyses for hardening materials in the literature are limited to the simple kinematic hardening rules of Prager and Armstrong–Frederick. In other words, much more advanced hardening rules may not be vital to decide whether a structure will shakedown or not. Results of shakedown analyses for some complex structures are included.

[1]  Nobutada Ohno,et al.  Inelastic stress-strain response of 214Cr-1Mo steel under combined tension-torsion at 600°C , 1994 .

[2]  X. Feaugas,et al.  Ratchetting process in the stainless steel AISI 316L at 300 K: an experimental investigation , 2004 .

[3]  J. Boyle,et al.  Shakedown of creeping structures , 1998 .

[4]  Huseyin Sehitoglu,et al.  Multiaxial cyclic ratchetting under multiple step loading , 1994 .

[5]  G. Breitbach,et al.  Investigation of the ratcheting phenomenon for dominating bending loads , 1997 .

[6]  Alan R.S. Ponter,et al.  The Plastic Ratcheting of Thin Cylindrical Shells Subjected to Axisymmetric Thermal and Mechanical Loading , 1987 .

[7]  R. Swindeman.  Cyclic Stress-Strain-Time Response of a 9Cr-1Mo-V-Nb Pressure Vessel Steel at High Temperature , 1988 .

[8]  E. Stein,et al.  An analytical method for shakedown problems with linear kinematic hardening materials , 1994 .

[9]  H. Kühn,et al.  High-temperature behaviour of IN 738 LC under isothermal and thermo-mechanical cyclic loading , 1997 .

[10]  G. Saxcé,et al.  Plasticity with non-linear kinematic hardening: modelling and shakedown analysis by the bipotential approach , 2001 .

[11]  Ted Belytschko,et al.  Plane stress shakedown analysis by finite elements , 1972 .

[12]  N. Ohno,et al.  Thermal ratchetting of a cylinder subjected to a moving temperature front: Effects of kinematic hardening rules on the analysis , 1996 .

[13]  R. Hill.  The mathematical theory of plasticity , 1950 .

[14]  C. Guionnet,et al.  Modeling of Ratchetting in Biaxial Experiments , 1992 .

[15]  Yuan-Gao Zhang,et al.  An iteration algorithm for kinematic shakedown analysis , 1995 .

[16]  Z. Zhang,et al.  Anisothermal cyclic plasticity modelling of martensitic steels , 2002 .

[17]  Robert Hamilton,et al.  The elastic compensation method for limit and shakedown analysis: A review , 2000 .

[18]  G. Borino.  Consistent shakedown theorems for materials with temperature dependent yield functions , 2000 .

[19]  Tasnim Hassan,et al.  An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation , 2002 .

[20]  Giulio Maier,et al.  Shakedown theorems for some classes of nonassociative hardening elastic-plastic material models , 1995 .

[21]  N. Ohno,et al.  Two equivalent forms of nonlinear kinematic hardening: application to nonisothermal plasticity , 1991 .

[22]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[23]  G. Kang,et al.  Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures , 2002 .

[24]  T. Kaito,et al.  Inelastic Behavior of Type 316 Stainless Steel Under Multiaxial Nonproportional Cyclic Stressings at Elevated Temperature , 1985 .

[25]  Jouni Freund,et al.  Fifth World Congress on Computational Mechanics, WCCM V , 2002 .

[26]  Wolf Reinhardt,et al.  A Non-Cyclic Method for Plastic Shakedown Analysis , 2003 .

[27]  M. Kawai,et al.  Effects of Amplitude-History and Temperature-History on Multiaxial Cyclic Behavior of Type 316 Stainless Steel , 1989 .

[28]  Duc Chinh Pham.  Dynamic shakedown and a reduced kinematic theorem , 1996 .

[29]  D. Moulin,et al.  Practical analysis of ratchetting , 1982 .

[30]  Strainhardening effects in shakedown processes , 1988 .

[31]  Ali Chaaba,et al.  A new approach to shakedown analysis for non-standard elastoplastic material by the bipotential , 2003 .

[32]  N. Ohno,et al.  Ratchetting characteristics of 316FR steel at high temperature, part II: Analysis of thermal ratchetting induced by spatial variation of temperature , 1998 .

[33]  Dieter Weichert,et al.  An extension of the static shakedown theorem to inelastic cracked structures , 1999 .

[34]  R. D. Krieg.  A Practical Two Surface Plasticity Theory , 1975 .

[35]  M. Kawai,et al.  Temperature-Dependence of Multiaxial Non-Proportional Cyclic Behavior of Type 316 Stainless Steel , 1989 .

[36]  N. Ohno,et al.  Kinematic hardening rules with critical state of dynamic recovery, part I: formulation and basic features for ratchetting behavior , 1993 .

[37]  F. Barlat,et al.  Strain rate potential for metals and its application to minimum plastic work path calculations , 1993 .

[38]  K. K. Vaze,et al.  Uniaxial and biaxial ratchetting study of SA333 Gr.6 steel at room temperature , 2003 .

[39]  D. Pope,et al.  Mechanical properties of Ni3AI and nickel-base alloys with high volume fraction of γ' , 1984 .

[40]  Chong-Won Lee,et al.  Yield surfaces and loading surfaces. Experiments and recommendations , 1979 .

[41]  Manfred Staat,et al.  Basis Reduction for the Shakedown Problem for Bounded Kinematic Hardening Material , 2000, J. Glob. Optim..

[42]  Jie Tong,et al.  Modelling of cyclic plasticity and viscoplasticity of a nickel-based alloy using Chaboche constitutive equations , 2004 .

[43]  D. N. Robinson,et al.  Viscoplastic constitutive relationships with dependence on thermomechanical history , 1985 .

[44]  D. Pope,et al.  The orientation and temperature dependence of the yield stress of Ni3 (Al, Nb) single crystals , 1979 .

[45]  A. Nayebi,et al.  Cyclic plastic and creep behaviour of pressure vessels under thermomechanical loading , 2002 .

[46]  Jae-Han Lee,et al.  Thermal ratchetting deformation of a 316L stainless steel cylindrical structure under an axial moving temperature distribution , 2003 .

[47]  S. Takeuchi,et al.  Temperature and orientation dependence of the yield stress in Ni{in3}Ga single crystals , 1973 .

[48]  B. G. Neal.  Plastic Collapse and Shakedown Theorems for Structures of Strain-Hardening Material , 1950 .

[49]  D. Weichert.  On the influence of geometrical nonlinearities on the shakedown of elastic-plastic structures , 1986 .

[50]  M. Wen,et al.  Dislocation structure due to high temperature deformation in the γ′ phase of a nickel-based superalloy , 1989 .

[51]  Quoc Son Nguyen,et al.  On shakedown theorems in hardening plasticity , 2001 .

[52]  P. D. Chinh.  Shakedown kinematic theorem for elastic–perfectly plastic bodies , 2001 .

[53]  G. Bodovillé.  A kinematic elastic nonshakedown theorem for implicit standard materials , 2002 .

[54]  Quoc Son Nguyen,et al.  On shakedown analysis in hardening plasticity , 2003 .

[55]  J. Zarka,et al.  Elastic-Plastic Response of a Structure to Cyclic Loading: Practical Rules , 1981 .

[56]  E. Stein,et al.  Micromechanical Modelling and Computation of Shakedown with Nonlinear Kinematic Hardening — Including Examples for 2D-Problems , 1991 .

[57]  G. Kang,et al.  Uniaxial ratcheting of SS304 stainless steel at high temperatures: visco-plastic constitutive model , 2003 .

[58]  Nobutada Ohno,et al.  Evaluation of inelastic constitutive models under plasticity-creep interaction in multiaxial stress state , 1991 .

[59]  G. Maier.  A shakedown matrix theory allowing for workhardening and second-order geometric effects , 1974 .

[60]  C. Polizzotto,et al.  Dynamic shakedown of structures with variable appended masses and subjected to repeated excitations , 1996 .

[61]  Dieter Weichert,et al.  Numerical shakedown analysis of damaged structures , 1998 .

[62]  H. Rack,et al.  Elevated temperature hardening of INCONEL 690 , 1998 .

[63]  Xi-Qiao Feng,et al.  Damage and shakedown analysis of structures with strain-hardening , 1995 .

[64]  Guozheng Kang,et al.  Uniaxial cyclic ratcheting and plastic flow properties of SS304 stainless steel at room and elevated temperatures , 2002 .

[65]  Olivier Débordes,et al.  Elastic plastic shakedown of 3D periodic heterogeneous media: a direct numerical approach , 2004 .

[66]  J. Ju,et al.  On energy-based coupled elastoplastic damage theories: Constitutive modeling and computational aspects , 1989 .

[67]  U. S. Lindholm,et al.  Inelastic Deformation Under Nonisothermal Loading , 1990 .

[68]  Huseyin Sehitoglu,et al.  Cyclic ratchetting of 1070 steel under multiaxial stress states , 1994 .

[69]  Paolo Fuschi,et al.  Limit analysis for a general class of yield conditions , 2000 .

[70]  G. Cailletaud,et al.  Numerical techniques for cyclic plasticity at variable temperature , 1986 .

[71]  N. Ohno.  CONSTITUTIVE MODELING OF CYCLIC PLASTICITY WITH EMPHASIS ON RATCHETTING , 1998 .

[72]  Alan D. Freed,et al.  Thermoviscoplastic model with application to copper , 1988 .

[73]  P. Delobelle.  Synthesis of the elastoviscoplastic behavior and modelization of an austenitic stainless steel over a large temperature range, under uniaxial and biaxial loadings, part II: Phenomenological modelization , 1993 .

[74]  J. R. Q. Franco.  Adaptive F.E. method for the shakedown and limit analysis of pressure vessels , 2003 .

[75]  S. A. Chavez,et al.  High-temperature tensile and creep data for Inconel 600, 304 stainless steel and SA106B carbon steel , 1994 .

[76]  Yannis F. Dafalias,et al.  Plastic Internal Variables Formalism of Cyclic Plasticity , 1976 .

[77]  D. Weichert,et al.  On the problem of interfacial damage in fibre-reinforced composites under variable loads , 2005 .

[78]  Francesco Genna.  A nonlinear inequality, finite element approach to the direct computation of shakedown load safety factors , 1988 .

[79]  P. Perzyna.  Constitutive Modeling of Dissipative Solids for Postcritical Behavior and Fracture , 1984 .

[80]  D. Weichert,et al.  The numerical assessment of elastic-plastic sheets under variable mechanical and thermal loads using a simplified two-surface yield condition , 1988 .

[81]  E. Lorentz,et al.  An elastic–plastic constitutive law for the description of uniaxial and multiaxial ratchetting , 1999 .

[82]  C. Polizzotto.  Shakedown of elastic—plastic solids with frictionless unilateral contact boundary conditions , 1997 .

[83]  David L. McDowell,et al.  Modeling temperature and strain rate history effects in OFHC Cu , 1998 .

[84]  J. Chaboche,et al.  Modelization of the Strain Memory Effect on the Cyclic Hardening of 316 Stainless Steel , 1979 .

[85]  Sylvain Calloch,et al.  A general cyclic plasticity model taking into account yield surface distortion for multiaxial ratchetting , 2004 .

[86]  N. Ohno,et al.  Ratchetting characteristics of 316FR steel at high temperature, part I: Strain-controlled ratchetting experiments and simulations , 1998 .

[87]  Michael Vormwald,et al.  A plasticity model for calculating stress–strain sequences under multiaxial nonproportional cyclic loading , 2003 .

[88]  Giulio Maier.  Shakedown of Plastic Structures with Unstable Parts , 1972 .

[89]  H. Stumpf.  Theoretical and computational aspects in the shakedown analysis of finite elastoplasticity , 1993 .

[90]  K. K. Vaze,et al.  Uniaxial and biaxial ratchetting in piping materials: experiments and analysis , 2004 .

[91]  Erwin Stein,et al.  Modeling and computation of shakedown problems for nonlinear hardening materials , 1993 .

[93]  N. Ohno,et al.  A Constitutive Model of Cyclic Plasticity for Nonlinear Hardening Materials , 1986 .

[94]  E. Tanaka,et al.  Plastic Deformation Behavior of Type 316 Stainless Steel Subject to Out-of-Phase Strain Cycles , 1985 .

[95]  Ernst Melan,et al.  Zur Plastizität des räumlichen Kontinuums , 1938 .

[96]  P. Robinet,et al.  Mechanical and microstructural investigations of an austenitic stainless steel under non-proportional loadings in tension–torsion-internal and external pressure , 2001 .

[97]  George Z. Voyiadjis,et al.  Microstructural based models for bcc and fcc metals with temperature and strain rate dependency , 2005 .

[98]  S. Kyriakides,et al.  Ratcheting in cyclic plasticity, part II: Multiaxial behavior , 1992 .

[99]  Yukio Takahashi,et al.  Ratchetting of viscoplastic material with cyclic softening, part 1: experiments on modified 9Cr–1Mo steel , 2005 .

[100]  Nobutada Ohno,et al.  Evaluation of inelastic constitutive models under plasticity-creep interaction for 214Cr—1Mo steel at 600°C☆ , 1989 .

[101]  E. Stein,et al.  Shakedown of a cracked body consisting of kinematic hardening material , 1996 .

[102]  D. Weichert,et al.  Elastic-plastic shells under variable mechanical and thermal loads , 1992 .

[103]  J. Chaboche,et al.  Modeling of ratchetting: evaluation of various approaches , 1994 .

[104]  P. Dillström,et al.  Local limit load solutions for surface cracks in plates and cylinders using finite element analysis , 2004 .

[105]  M. Robinson,et al.  Numerical analysis of the elastic-plastic behaviour of pressure vessels with ellipsoidal and torispherical heads , 1996 .

[106]  R. Ainsworth.  A note on bounding solutions for creeping structures subjected to load variations above the shakedown limit , 1979 .

[107]  W. W. Milligan,et al.  Yielding and deformation behavior of the single crystal superalloy PWA 1480 , 1987 .

[108]  J. Bree.  Elastic-plastic behaviour of thin tubes subjected to internal pressure and intermittent high-heat fluxes with application to fast-nuclear-reactor fuel elements , 1967 .

[109]  Alan R.S. Ponter,et al.  Shakedown Limits for a General Yield Condition: Implementation and Application for a Von Mises Yield Condition , 2000 .

[110]  Yuzhe Liu,et al.  Lower bound shakedown analysis by the symmetric Galerkin boundary element method , 2005 .

[111]  A. Ponter,et al.  Cyclic thermal loading in the creep range—I. Low levels of thermal loading , 1985 .

[112]  Toshihide Igari,et al.  Prediction method for thermal ratcheting of a cylinder subjected to axially moving temperature distribution. , 1989 .

[113]  Mohammad M. Megahed,et al.  Influence of hardening rule on the elasto-plastic behaviour of a simple structure under cyclic loading , 1981 .

[114]  F. Schubert,et al.  Shakedown and ratchetting under tension–torsion loadings: analysis and experiments , 2003 .

[115]  D. Weichert,et al.  On kinematic upper bounds for the safety factor in shakedown theory , 1992 .

[116]  P. Delobelle.  Synthesis of the elastoviscoplastic behavior and modelization of an austenitic stainless steel over a large temperature range, under uniaxial and biaxial loadings, part I: Behavior , 1993 .

[117]  K. Ikegami,et al.  Effect of creep prestrain on subsequent plastic deformation , 1985 .

[118]  Wang Xianfeng,et al.  Lower-bound shakedown analysis of spherical shells containing defects , 1996 .

[119]  J. Bree.  Plastic deformation of a closed tube due to interaction of pressure stresses and cyclic thermal stresses , 1989 .

[120]  Alberto Corigliano,et al.  Dynamic shakedown in elastoplastic structures with general internal variable constitutive laws , 1991 .

[121]  Shakedown of three-dimensional structures under cyclic loading with the simplified analysis , 2002 .

[122]  M. Eslami,et al.  Cyclic loading of beams based on the Prager and Frederick–Armstrong kinematic hardening models , 2002 .

[123]  Raffaele Casciaro,et al.  An iterative method for shakedown analysis , 2002 .

[124]  Liguo Zhao,et al.  On the uniaxial mechanical behaviour of an advanced nickel base superalloy at high temperature , 2001 .

[125]  D. Weichert.  Shakedown at finite displacements; A note on Melan's theorem , 1984 .

[126]  M. Yaguchi,et al.  A viscoplastic constitutive model for nickel-base superalloy, part 2: modeling under anisothermal conditions , 2002 .

[127]  R. Preiss.  On the shakedown analysis of nozzles using elasto-plastic FEA , 1999 .

[128]  S. Karadeniz,et al.  An Extended Shakedown Theory for Structures That Suffer Cyclic Thermal Loading, Part 1: Theory , 1985 .

[129]  T. Igari,et al.  The viscoplasticity theory applied to the inelastic analysis at elevated temperatures , 1992 .

[130]  P. D. Chinh.  Shakedown theory for elastic-perfectly plastic bodies revisited , 2003 .

[131]  F. Leckie,et al.  On the behaviour of metal matrix composites subjected to cyclic thermal loading , 1998 .

[132]  Stelios Kyriakides,et al.  On the performance of kinematic hardening rules in predicting a class of biaxial ratcheting histories , 1996 .

[133]  Toshihide Igari,et al.  Mechanism-Based Evaluation of Thermal Ratcheting due to Traveling Temperature Distribution , 2000 .

[134]  George Z. Voyiadjis,et al.  Plastic deformation modeling of AL-6XN stainless steel at low and high strain rates and temperatures using a combination of bcc and fcc mechanisms of metals , 2005 .

[135]  Masakazu Ichimiya,et al.  Advanced evaluation of thermal ratchetting of FBR components , 1993 .

[136]  F. A. Leckie,et al.  Shakedown loads for radial nozzles in spherical pressure vessels , 1967 .

[137]  E. Sanchez-Palencia.  Non-Homogeneous Media and Vibration Theory , 1980 .

[138]  Yukio Takahashi,et al.  A viscoplastic constitutive model incorporating dynamic strain aging effect during cyclic deformation conditions , 2000 .

[139]  X. Feaugas,et al.  Cyclic creep process in AISI 316L stainless steel in terms of dislocation patterns and internal stresses , 2004 .

[140]  D. Weichert,et al.  Influence of geometrical nonlinearities on the shakedown of damaged structures , 1998 .

[141]  Giulio Maier,et al.  Shakedown theory in perfect elastoplasticity with associated and nonassociated flow-laws: A finite element, linear programming approach , 1969 .

[142]  S. Caddemi,et al.  Shakedown problems for material models with internal variables , 1991 .

[143]  S. Karadeniz,et al.  An Extended Shakedown Theory for Structures That Suffer Cyclic Thermal Loading, Part 2: Applications , 1985 .

[144]  Alberto Corigliano,et al.  Dynamic shakedown analysis and bounds for elastoplastic structures with nonassociative, internal variable constitutive laws , 1995 .

[145]  Haofeng Chen,et al.  Shakedown and limit analyses for 3-D structures using the linear matching method , 2001 .

[146]  On shakedown of three-dimensional elastoplastic strain-hardening structures , 1996 .

[147]  R. P. Skelton,et al.  History effects on the cyclic stress—strain response of a polycrystalline and single crystal nickel-base superalloy , 1996 .

[148]  Sylvain Calloch,et al.  Ratchetting under tension–torsion loadings: experiments and modelling , 2000 .

[149]  J. Chaboche,et al.  Model for 28CrMoV5-8 steel undergoing thermomechanical cyclic loadings , 1997 .

[150]  J. Kamenjarzh,et al.  On kinematic method in shakedown theory. I: Duality of extremum problems , 1994 .

[151]  Boris Druyanov,et al.  Conditions for shakedown of damaged elastic plastic bodies , 1999 .

[152]  Genbao Zhang,et al.  Shakedown with nonlinear strain-hardening including structural computation using finite element method , 1992 .

[153]  Haofeng Chen,et al.  A method for the evaluation of a ratchet limit and the amplitude of plastic strain for bodies subjected to cyclic loading , 2001 .

[154]  David P. Pope,et al.  A theory of the anomalous yield behavior in L12 ordered alloys , 1984 .

[155]  Sumio Murakami,et al.  Inelastic behaviour of 214Cr-1Mo steel under plasticity-creep interaction condition: An interim report of the Bench Mark project by the subcommittee on inelastic analysis and life prediction of high temperature materials, JSMS☆ , 1985 .

[156]  John D. Meyer.  Shakedown of Strain-Hardening Structures , 1972 .

[157]  W. Prager,et al.  A NEW METHOD OF ANALYZING STRESSES AND STRAINS IN WORK - HARDENING PLASTIC SOLIDS , 1956 .

[158]  Robert Hamilton,et al.  Elastic shakedown in pressure vessel components under non-proportional loading , 2002 .

[159]  Manfred Staat,et al.  Cyclic plastic deformation tests to verify FEM-based shakedown analyses , 2001 .

[160]  Yukio Takahashi,et al.  Constitutive Modeling of Anisothermal Cyclic Plasticity of 304 Stainless Steel , 1989 .

[161]  Hartwig Hübel,et al.  Basic conditions for material and structural ratcheting , 1996 .

[162]  Xu Chen,et al.  Modified kinematic hardening rule for multiaxial ratcheting prediction , 2004 .

[163]  M. Abdel-Karim,et al.  SHAKEDOWN ANALYSIS OF AN INFINITE PLATE WITH A CENTRAL HOLE UNDER BIAXIAL TENSION , 2000 .

[164]  M. Kawai.  A comparative study of anisotropic creep theories , 1994 .

[165]  C. Testani,et al.  AA2618 and AA7075 alloys superplastic transition in isothermal hot-deformation tests , 2000 .

[166]  Z. Mroz.  An attempt to describe the behavior of metals under cyclic loads using a more general workhardening model , 1969 .

[167]  Alan R.S. Ponter,et al.  Linear matching method for creep rupture assessment , 2003 .

[168]  Stelios Kyriakides,et al.  Ratcheting of cyclically hardening and softening materials: II. Multiaxial behavior , 1994 .

[169]  G. Maier,et al.  Symmetric Galerkin Boundary Element Methods , 1998 .

[170]  Robert Hamilton,et al.  Evaluating shakedown under proportional loading by non-linear static analysis , 2003 .

[171]  Yoshio Fukuda,et al.  Proposal of a new estimation method for the thermal ratchetting of a cylinder subjected to a moving temperature distribution , 1993 .

[172]  Manfred Staat,et al.  LISA : a European project for FEM-based limit and shakedown analysis , 2001 .

[173]  C. Polizzotto,et al.  Shakedown and steady-state responses of elastic-plastic solids in large displacements , 1996 .

[174]  J. Groß-Weege.  A unified formulation of statical shakedown criteria for geometrically nonlinear problems , 1990 .

[175]  Leone Corradi,et al.  A linear programming approach to shakedown analysis of structures , 1974 .

[176]  M. Yaguchi,et al.  A viscoplastic constitutive model for nickel-base superalloy, part 1: kinematic hardening rule of anisotropic dynamic recovery , 2002 .

[177]  Dieter Weichert,et al.  Application of shakedown theory to damaging inelastic material under mechanical and thermal loads , 1997 .

[178]  C. Tsai,et al.  Effects of temperature on the cyclic deformation behaviour and microstructural changes of 12Cr-1MoVW martensitic stainless steel , 1994 .

[179]  Dieter Weichert,et al.  SHAKEDOWN ANALYSIS OF COMPOSITES , 1999 .

[180]  Adaptation d'une structure plastique ecrouissable , 1976 .

[181]  Haofeng Chen,et al.  A minimum theorem for cyclic load in excess of shakedown, with application to the evaluation of a ratchet limit , 2001 .

[182]  Nobutada Ohno,et al.  Recent Topics in Constitutive Modeling of Cyclic Plasticity and Viscoplasticity , 1990 .

[183]  D. C. Drucker,et al.  Conventional and Unconventional Plastic Response and Representation , 1988 .

[184]  Y. Niitsu,et al.  Effect of temperature variation on cyclic elastic-plastic behavior of SUS 304 stainless steel , 1990 .

[185]  Xi-Qiao Feng,et al.  A global/local shakedown analysis method of elastoplastic cracked structures 1 1 Dedicated to Profes , 1999 .

[186]  J. Mandel.  Adaptation d'une structure plastique ecrouissable et approximations , 1976 .

[187]  K. P. Walker,et al.  High temperature inelastic deformation under uniaxial loading - Theory and experiment , 1989 .

[188]  G. Voyiadjis,et al.  Thermodynamic based model for the evolution equation of the backstress in cyclic plasticity , 2003 .

[189]  Yukio Takahashi.  Application of a two-surface plasticity model for thermal ratcheting and failure life estimation in , 1995 .

[190]  I. Roman,et al.  Concept of the limit yield condition in shakedown theory , 1997 .

[191]  Tasnim Hassan,et al.  Anatomy of coupled constitutive models for ratcheting simulation , 2000 .

[192]  P. Delobelle,et al.  Behavior and modeling of a 17-12 SPH stainless steel under cyclic, uni and bidirectional, anisothermal loadings. Part I: Behavior , 1996 .

[193]  Yukio Takahashi,et al.  Ratchetting of viscoplastic material with cyclic softening, part 2: application of constitutive models , 2005 .

[194]  N. Ohno,et al.  Kinematic hardening model suitable for ratchetting with steady-state , 2000 .

[195]  B. Postberg,et al.  Simulation of ratcheting of AISI 316L(N) steel under nonproportional uniaxial loading and high number of load cycles using the Ohno and Wang nonlinear kinematic material model , 2000 .

[196]  Masao Sakane,et al.  Cyclic behavior of a type 304 stainless steel in biaxial stress states at elevated temperatures , 1988 .

[197]  Tatsuo Inoue,et al.  Inelastic analysis of new thermal ratchetting due to a moving temperature front , 2002 .

[198]  David L. McDowell,et al.  A Two Surface Model for Transient Nonproportional Cyclic Plasticity, Part 1: Development of Appropriate Equations , 1985 .