Earthquake response of ten-story story-drift-controlled reinforced concrete frames with hysteretic dampers

Abstract To date, most studies on the earthquake response of building structures with hysteretic dampers have defined the mechanical properties of dampers based on a required yield strength and stiffness. Moreover, some previous studies have also shown that the performance of hysteretic dampers is influenced by the damage in the main structure, especially in reinforced concrete (R/C) building structures. This suggests that the deformations of the main frame and hysteretic dampers should be carefully controlled. Therefore, this paper investigates the earthquake response of R/C building structures with hysteretic dampers and presents the ‘constant yield story-drift ratio’ as a deformation-controlling scheme for the definition of the yield deformation of hysteretic dampers. This scheme is also introduced to observe its influence on the performance of the R/C main structure when installing hysteretic dampers. To evaluate the structural performance, a parametric study is performed through non-linear time-history analyses on a series of ten-story R/C frames with hysteretic dampers defined by the proposed scheme. The results indicate that the scheme presented in this study may lead to a relatively constant distribution along the height of the reduction of floor displacements and seismic damage in the R/C main structure.

[1]  Mamoru Iwata,et al.  Buckling‐restrained brace using steel mortar planks; performance evaluation as a hysteretic damper , 2006 .

[2]  Jinkoo Kim,et al.  BEHAVIOR AND DESIGN OF STRUCTURES WITH BUCKLING-RESTRAINED BRACES , 2004 .

[3]  T. Takeda,et al.  Reinforced Concrete response to simulated earthquakes , 1970 .

[4]  Sang-Hoon Oh,et al.  Seismic performance of steel structures with slit dampers , 2009 .

[5]  Jinkoo Kim,et al.  Energy-based seismic design of structures with buckling-restrained braces , 2004 .

[6]  Jinkoo Kim,et al.  Seismic design of low-rise steel frames with buckling-restrained braces , 2004 .

[7]  Hiroshi Akiyama,et al.  Earthquake-resistant limit-state design for buildings , 1985 .

[8]  Faris Albermani,et al.  Experimental study of steel slit damper for passive energy dissipation , 2008 .

[9]  Amador Teran-Gilmore,et al.  Preliminary Design of Low-Rise Buildings Stiffened with Buckling-Restrained Braces by a Displacement-Based Approach , 2009 .

[10]  Shin Okamoto,et al.  Response Control and Seismic Isolation of Buildings , 2006 .

[11]  Akihiko Kawano,et al.  A METHOD TO IMPROVE THE DISTRIBUTION OF STORY DRIFT ANGLE RESPONSES IN MULTI-STORY BUILDING WITH HYSTERETIC DAMPERES UNDER EARTHQUAKE EXCITATIONS , 2008 .

[12]  Subhash C. Goel,et al.  Toward Performance-Based Seismic Design of Structures , 1999 .

[13]  Vitelmo V. Bertero,et al.  Earthquake Engineering: From Engineering Seismology To Performance-Based Engineering , 2020 .

[14]  Masayoshi Nakashima,et al.  ENERGY INPUT AND DISSIPATION BEHAVIOUR OF STRUCTURES WITH HYSTERETIC DAMPERS , 1996 .

[15]  Kazuo Inoue,et al.  Optimum strength ratio of hysteretic damper , 1998 .

[16]  Božidar Stojadinović,et al.  Energy-based Seismic Design of Structures using Yield Mechanism and Target Drift , 2002 .

[17]  J. S. Hwang,et al.  Direct displacement-based design for building with passive energy dissipation systems , 2003 .