Experimental study of heat transfer enhancement in narrow rectangular channel with longitudinal vortex generators

Abstract In order to enhance heat transfer in cooling channels of plate-type fuel elements in reactor cores, the experimental research is conducted on the heat transfer and pressure drop in horizontal narrow rectangular channels with mounted longitudinal vortex generators (LVGs) for water flow with Prandtl number Pr  = 4–5. The parameters examined were: flow velocity from 0.5 to 3.4 m/s, Reynolds number from 3000 to 20,000, heat flux 43.6 kW/m 2 , maximum system pressure 1.3 atm, and viscosity ratio from 1.05 to 1.2. It is found that the LVGs could greatly improve the heat transfer rate by 10–45%. Thermal performance is compared under three constraints, i.e., identical mass flow rate (IMF), identical pressure drop (IPD) and identical pumping power (IPP). It is found that the heat transfer performance of channel with LVGs on two sides are better than those on one side. Application of LVGs to plate-type fuel element is a potential technique for next generation advanced nuclear reactors concepts.

[1]  Wen-Quan Tao,et al.  Experimental Study on Heat Transfer in Ducts with Winglet Disturbances , 2003 .

[2]  P. Brandner,et al.  Hydrodynamic Performance of a Vortex Generator , 2003 .

[3]  M. Islam,et al.  Experimental Study on Heat Transfer Augmentation for High Heat Flux Removal in Rib-Roughened Narrow Channels , 1998 .

[4]  Y. Jaluria,et al.  An Introduction to Heat Transfer , 1950 .

[5]  R. B. Dean.  Reynolds Number Dependence of Skin Friction and Other Bulk Flow Variables in Two-Dimensional Rectangular Duct Flow , 1978 .

[6]  M. Fiebig,et al.  Heat transfer enhancement of a finned oval tube with punched longitudinal vortex generators in-line , 1998 .

[7]  L. Burmeister.  Convective heat transfer , 1983 .

[8]  Liang-Bi Wang,et al.  Experimental study of developing turbulent flow and heat transfer in ribbed convergent/divergent square ducts , 2001 .

[9]  Haiyang Li,et al.  Flow patterns and heat transfer enhancement in low-Reynolds–Rayleigh-number channel flow , 2002 .

[10]  A. Fichera,et al.  Laminar natural convection in a vertical isothermal channel with symmetric surface-mounted rectangular ribs , 2002 .

[11]  Wang Ling.  Heat Transfer Enhancement in Rectangular Narrow Channel with Periodically Mounted Longitudinal Vortex Generators on One Sidewall , 2005 .

[12]  Hiroshi Kawamura,et al.  DNS of turbulent heat transfer in channel flow with low to medium-high Prandtl number fluid , 1998 .

[13]  Jiin-Yuh Jang,et al.  Heat transfer and fluid flow analysis in plate-fin and tube heat exchangers with a pair of block shape vortex generators , 2004 .

[14]  Giovanni Tanda,et al.  Heat transfer in rectangular channels with transverse and V-shaped broken ribs , 2004 .

[15]  R. Shah,et al.  Heat transfer surface enhancement through the use of longitudinal vortices: a review of recent progress , 1995 .

[16]  M. Fiebig.  Vortex Generators for Compact Heat Exchangers , 1995 .