Sliding mode control of hydrogen production via autothermal reforming of methanol

This paper focuses on control of hydrogen production via autothermal reforming of methanol. Owing to uncertainty of model parameters, a sliding mode controller is designed for regulating hydrogen yield by manipulating methanol flow and water flow. Theoretical analysis and simulations demonstrate its adaptability to shifts of model parameters. In addition, a variable ratio controller is proposed in order to achieve a steady reforming temperature, in which the reforming air is employed as manipulated variable. Finally, the effectiveness of this control strategy is verified through experiments.

[1]  Donald J. Chmielewski,et al.  Nonlinear multivariable predictive control of an autothermal reforming reactor for fuel cell applications , 2009, 2009 American Control Conference.

[2]  A. Tornambè.  High-gain observers for non-linear systems , 1992 .

[3]  Spyros Voutetakis,et al.  A combined methanol autothermal steam reforming and PEM fuel cell pilot plant unit: Experimental and simulation studies , 2009 .

[4]  Nicolas Boizot,et al.  An adaptive high-gain observer for nonlinear systems , 2010, Autom..

[5]  Vadim I. Utkin,et al.  Sliding Modes and their Application in Variable Structure Systems , 1978 .

[6]  U. Itkis,et al.  Control systems of variable structure , 1976 .

[7]  Vadim I. Utkin,et al.  Sliding mode control in electromechanical systems , 1999 .

[8]  Siti Kartom Kamarudin,et al.  Design of a fuel processor unit for PEM fuel cell via shortcut design method , 2004 .

[9]  Lars J. Pettersson,et al.  Hydrogen generation by steam reforming of methanol over copper-based catalysts for fuel cell applications , 2001 .

[10]  Donald J. Chmielewski,et al.  Autothermal reforming of gasoline for fuel cell applications: Controller design and analysis , 2008 .

[11]  Lars J. Pettersson,et al.  Development of a methanol fuelled reformer for fuel cell applications , 2003 .

[12]  Chunxi Zhang,et al.  Autothermal reforming of methanol in a mini-reactor for a miniature fuel cell , 2007 .

[13]  Daisie D. Boettner,et al.  Proton exchange membrane (PEM) fuel cell-powered vehicle performance using direct-hydrogen fueling and on-board methanol reforming , 2004 .

[14]  Okyay Kaynak,et al.  The fusion of computationally intelligent methodologies and sliding-mode control-a survey , 2001, IEEE Trans. Ind. Electron..

[15]  John Y. Hung,et al.  Variable structure control: a survey , 1993, IEEE Trans. Ind. Electron..