Design recommendations for achieving “strong column-weak beam” in RC frames

Abstract This paper deals with the realization of ductile failure of RC frames with cast in-situ slabs. The cyclic loading experiments of two spatial reinforced concrete (RC) frames, a control specimen and a RC frame with cast in-situ slabs, are carried out. The failure pattern and the role of slabs are experimentally studied. Tests results indicate that slabs can change the failure pattern of RC frames from a typical “strong-column-weak-beam” failure to the “strong-beam-weak-column” failure. The slab reinforcement enhances the resistance moment of the beams, which is the main reason to form “strong-beam-weak-column”. The parameters such as axial compression ratio, thickness of slab, concrete strength, reinforcement ratio of slab and stiffness of transverse beam are investigated by Finite Element Analysis (FEA). Strut and tie model of slab is proposed to calculate the effective slab width. Simple equations are derived by a 95% guarantee rate based on 200 models. The required ratio of column-to-beam strength is studied based on the tests and FEA data. A reasonable required ratio is proposed to avoid the brittle failure of the RC frames for seismic design.

[1]  H. Shakib,et al.  On the December 26, 2003, southeastern Iran earthquake in Bam region , 2004 .

[2]  BaiTao Sun,et al.  The Wenchuan earthquake creation of a rich database of building performance , 2010 .

[3]  Tiziana Rossetto,et al.  Field Investigation on the Performance of Building Structures During the 12 May 2008 Wenchuan Earthquake in China , 2009 .

[5]  Jack P. Moehle,et al.  Simple Analytical Model for T-Beams in Flexure , 1988 .

[6]  James K. Wight,et al.  Earthquake Resistance of Reinforced Concrete Interior Connections Including a Floor Slab , 1987 .

[7]  T. Rossetto,et al.  Field observations from the Aquila, Italy earthquake of April 6, 2009 , 2011 .

[8]  M. H. Arslan,et al.  What is to be learned from damage and failure of reinforced concrete structures during recent earthquakes in Turkey , 2007 .

[9]  S. J. Pantazopoulou,et al.  Response of RC Frame under Lateral Loads , 1991 .

[10]  A. J. Durrani,et al.  Seismic Response of Connections in Two-Bay Reinforced Concrete Frame subassemblies with a floor slab , 1990 .

[11]  Jack P. Moehle,et al.  "BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-11) AND COMMENTARY" , 2011 .

[12]  T. Rossetto,et al.  Observations of damage due to the Kashmir earthquake of October 8, 2005 and study of current seismic provisions for buildings in Pakistan , 2009 .

[13]  M. Ehsani,et al.  Effect of Transverse Beams and Slab on Behavior of Reinforced Concrete Beam-to-Column Connections , 1985 .

[14]  Huang Liang,et al.  Approach of the Collapses of RC Frame Structure School Buildings , 2010 .