Investigation of rare earth (RE) on improving the corrosion resistance of Zr-Ti deoxidized low alloy steel in the simulated tropic marine atmospheric environment

[1]  Q. Guo,et al.  Probing rare earth segregation in steels , 2023, Scripta Materialia.

[2]  Q. Wei,et al.  The influence of Ca2+ on the growth mechanism of corrosion product film on N80 steel in CO2 corrosion environments , 2023, Corrosion Science.

[3]  Hongda Guo,et al.  Improvement on the CO2 corrosion prediction via considering the corrosion product performance , 2023, Corrosion Science.

[4]  W. Liu,et al.  Mechanism of the dual effect of Te addition on the localised corrosion resistance of 15–5PH stainless steel , 2023, Corrosion Science.

[5]  Kang Hai Tan,et al.  Microcell and macrocell corrosion of steel bars in reinforced concrete slabs under different corrosive environments and cathode/anode configurations , 2023, Cement and Concrete Composites.

[6]  Xiaoguang Huang,et al.  The synergistic effect of temperature, H2S / CO2 partial pressure and stress toward corrosion of X80 pipeline steel , 2023, Engineering Failure Analysis.

[7]  Lijie Qiao,et al.  Revealing the corrosion product films of ion-implanted biodegradable Zn–Cu alloys , 2022, Corrosion Science.

[8]  Wei Zhao,et al.  Microstructure, mechanical properties and wear resistance of rare earth doped WC/steel matrix composites:Experimental and calculations , 2022, Ceramics International.

[9]  Yilun Li,et al.  Integral effects of Ca and Sb on the corrosion resistance for the high strength low alloy steel in the tropical marine environment , 2022, Corrosion Science.

[10]  Renguo Guan,et al.  Role of rare-earth yttrium in the hydrogen embrittlement of AISI 321 austenitic stainless steel , 2022, International Journal of Hydrogen Energy.

[11]  Peng Liu,et al.  Effect of rare earth elements on the segregation behavior and microstructure of super austenitic stainless steel , 2022, Journal of Materials Research and Technology.

[12]  Cheng-bin Shi,et al.  Effect of Ce on microstructures, carbides and mechanical properties in simulated coarse-grained heat-affected zone of 800-MPa high-strength low-alloy steel , 2022, Materials Science and Engineering: A.

[13]  D. Lu,et al.  Study on corrosion behavior and mechanism of AISI 4135 steel in marine environments based on field exposure experiment. , 2022, The Science of the total environment.

[14]  H. Terryn,et al.  New insights into the mechanism of localised corrosion induced by TiN-containing inclusions in high strength low alloy steel , 2022, Journal of Materials Science & Technology.

[15]  Huan Li,et al.  Effects of extrusion parameters on the microstructure, corrosion resistance, and mechanical properties of biodegradable Mg–Zn–Gd–Y–Zr alloy , 2022, Journal of Alloys and Compounds.

[16]  Yuan-chun Huang,et al.  Effects of heat treatment before extrusion on dynamic recrystallization behavior, texture and mechanical properties of as-extruded Mg-Gd-Y-Zn-Zr alloy , 2022, Materials Science and Engineering: A.

[17]  Zhao-hui Wang,et al.  Microstructures and mechanical properties of Mg-6Gd-1Er-0.5Zr alloy sheets produced with different rolling temperatures , 2021, Journal of Alloys and Compounds.

[18]  Wei Liu,et al.  On how the corrosion behavior and the functions of Cu, Ni and Mo of the weathering steel in environments with different NaCl concentrations , 2021, Corrosion Science.

[19]  Qing Wang,et al.  Amphiphobic concrete with good oil stain resistance and anti-corrosion properties used in marine environment , 2021 .

[20]  Xiaogang Li,et al.  Synergy of Cu and Sb to enhance the resistance of 3%Ni weathering steel to marine atmospheric corrosion , 2021 .

[21]  Lifeng Zhang,et al.  First-principles study on pitting corrosion of Al deoxidation stainless steel with rare earth element (La) treatment , 2021 .

[22]  Xiaogang Li,et al.  Effect of cathodic polarisation on stress corrosion cracking behaviour of a Ni(Fe, Al)-maraging steel in artificial seawater , 2021 .

[23]  H. Terryn,et al.  Towards a better understanding of localised corrosion induced by typical non-metallic inclusions in low-alloy steels , 2021 .

[24]  J. Moon,et al.  Role of bainitic microstructures with M-A constituent on the toughness of an HSLA steel for seismic resistant structural applications , 2021 .

[25]  Shuai Wang,et al.  Effect of rare earth elements on high temperature oxidation behaviour of austenitic steel , 2020 .

[26]  C. Dong,et al.  Initial microzonal corrosion mechanism of inclusions associated with the precipitated (Ti, Nb)N phase of Sb-containing weathering steel , 2020 .

[27]  Dawei Zhang,et al.  Influence of rare earth metals on mechanisms of localised corrosion induced by inclusions in Zr-Ti deoxidised low alloy steel , 2020 .

[28]  F. Huang,et al.  Understanding the effect of niobium on hydrogen-induced blistering in pipeline steel: A combined experimental and theoretical study , 2019, Corrosion Science.

[29]  A. Korchef,et al.  Effect of pH and temperature on calcium carbonate precipitation by CO2 removal from iron‐rich water , 2019, Water and Environment Journal.

[30]  D. K. Xu,et al.  Optimization of microstructure and mechanical property of a Mg-Zn-Y-Nd alloy by extrusion process , 2019, Journal of Alloys and Compounds.

[31]  Minbo Wang,et al.  Effects of rare earth yttrium on microstructure and properties of MgAlZn alloy , 2018 .

[32]  D. Choudhuri,et al.  Exceptional increase in the creep life of magnesium rare-earth alloys due to localized bond stiffening , 2017, Nature Communications.

[33]  C. Xu,et al.  Influence of size and distribution of W phase on strength and ductility of high strength Mg-5.1Zn-3.2Y-0.4Zr-0.4Ca alloy processed by indirect extrusion , 2017 .

[34]  H. Terryn,et al.  Effect of inclusions modified by rare earth elements (Ce, La) on localized marine corrosion in Q460NH weathering steel , 2017 .

[35]  Bing Chen,et al.  Precipitation in Mg-Gd-Y-Zr Alloy: Atomic-scale insights into structures and transformations , 2016 .

[36]  M. Bugnet,et al.  Segregation and clustering of solutes at grain boundaries in Mg–rare earth solid solutions , 2014 .

[37]  Eiji Tada,et al.  Long-term monitoring of atmospheric corrosion at weathering steel bridges by an electrochemical impedance method , 2014 .

[38]  Zhao-hui Wang,et al.  Microstructures and mechanical properties of Mg–13Gd–5Er–1Zn–0.3Zr alloy , 2014 .

[39]  B. Liu,et al.  Microstructures and tensile properties of hot extruded Mg–5Li–3Al–2Zn–xRE(Rare Earths) alloys , 2014 .

[40]  Minseok Choi,et al.  Effects of cerium on the compositional variations in and around inclusions and the initiation and propagation of pitting corrosion in hyperduplex stainless steels , 2013 .

[41]  Shuqi Zheng,et al.  Mechanism of (Mg, Al, Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion , 2013 .

[42]  C. Dong,et al.  Electrochemical Behavior of 304 Stainless Steel in Marine Atmosphere and Its Simulated Solution , 2013 .

[43]  P. Huber Kinetics of CO2 Stripping and Its Effect on the Saturation State of CaCO3 upon Aeration of a CaCO3–CO2–H2O System: Application to Scaling in the Papermaking Process , 2011 .

[44]  S. Ringer,et al.  Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium , 2011 .

[45]  Lei Chen,et al.  Effect of rare earth element yttrium addition on microstructures and properties of a 21Cr–11Ni austenitic heat-resistant stainless steel , 2011 .

[46]  Y. F. Cheng,et al.  In situ characterization by localized electrochemical impedance spectroscopy of the electrochemical activity of microscopic inclusions in an X100 steel , 2011 .

[47]  Ji-chun Yang,et al.  Effect of Ce on inclusions and impact property of 2Cr13 stainless steel , 2010 .

[48]  Jia She,et al.  Effect of rare earth Y addition on the microstructure and mechanical properties of high entropy AlCoCrCuNiTi alloys , 2010 .

[49]  Michael Rohwerder,et al.  High-resolution Kelvin probe microscopy in corrosion science: Scanning Kelvin probe force microscopy (SKPFM) versus classical scanning Kelvin probe (SKP) , 2007 .

[50]  V. Vignal,et al.  Use of the electrochemical microcell technique and the SVET for monitoring pitting corrosion at MnS inclusions , 2004 .