5 kW DC/DC converter for hydrogen generation from photovoltaic sources

Abstract This paper covers the design of a DC–DC power converter aimed for hydrogen production from photovoltaic sources. Power conditioning for such application is usually driven by different constraints: high step-down conversion ratio is required if the input voltage of such equipment has to be compatible with photovoltaic sources that are connected to grid-connected inverters; galvanic isolation; high efficiency and low mass. Taking into account those factors, this work proposes a push–pull DC/DC converter for power levels up to 5 kW. The operation and features of the converter are presented and analyzed. Design guidelines are suggested and experimental validation is also given.

[1]  John Andrews,et al.  Direct coupling of an electrolyser to a solar PV system for generating hydrogen , 2009 .

[2]  Gavin Conibeer,et al.  A comparison of PV/electrolyser and photoelectrolytic technologies for use in solar to hydrogen energy storage systems , 2007 .

[3]  S. Y. Erich,et al.  Input filter design criteria for current-programmed regulators , 1992 .

[4]  David Infield,et al.  Electrical integration of renewable energy into stand-alone power supplies incorporating hydrogen storage , 2007 .

[5]  Kodjo Agbossou,et al.  Electric round-trip efficiency of hydrogen and oxygen-based energy storage , 2005 .

[6]  T. Schott,et al.  Optimization of photovoltaic hydrogen production , 1988 .

[7]  H. Barthels,et al.  Phoebus-Jülich: An autonomous energy supply system comprising photovoltaics, electrolytic hydrogen, fuel cell , 1998 .

[8]  P. Hollmuller,et al.  Evaluation of a 5 kWp photovoltaic hydrogen production and storage installation for a residential home in Switzerland , 2000 .

[9]  Peter Lund,et al.  Optimization of stand-alone photovoltaic systems with hydrogen storage for total energy self-sufficiency , 1991 .

[10]  Ø. Ulleberg.  Modeling of advanced alkaline electrolyzers: a system simulation approach , 2003 .

[11]  M. E. Ropp,et al.  Comparative study of maximum power point tracking algorithms , 2003 .

[12]  L. G. Arriaga,et al.  Direct coupling of a solar-hydrogen system in Mexico , 2007 .

[13]  C. Cavallaro,et al.  A Phase-Shift Full Bridge Converter for the Energy Management of Electrolyzer Systems , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[14]  J. Bockris,et al.  ESTIMATES OF THE PRICE OF HYDROGEN AS A MEDIUM FOR WIND AND SOLAR SOURCES , 2007, Alternative Energy and Ecology (ISJAEE).

[15]  F.C. Lee,et al.  Design considerations for high-voltage high-power full-bridge zero-voltage-switched PWM converter , 1990, Fifth Annual Proceedings on Applied Power Electronics Conference and Exposition.

[16]  Ø. Ulleberg,et al.  TRNSYS simulation models for solar-hydrogen systems , 1997 .

[17]  R. Martínez-Béjar,et al.  Optimized photovoltaic generator–water electrolyser coupling through a controlled DC–DC converter , 2008 .

[18]  J. Andrews,et al.  Optimal coupling of PV arrays to PEM electrolysers in solar–hydrogen systems for remote area power supply , 2008 .

[19]  H Solmecke,et al.  Comparison of solar hydrogen storage systems with and without power-electronic DC–DC-converters , 2000 .

[20]  G. Scheible,et al.  Low cost soft switching DC-DC converter with autotransformer for photovoltaic hydrogen systems , 1997, Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066).

[21]  T. Nejat Veziroglu,et al.  Solar-hydrogen energy system for Saudi Arabia , 2004 .

[22]  Tore Undeland,et al.  Power Electronics: Converters, Applications and Design , 1989 .

[23]  K. Agbossou,et al.  Renewable energy systems based on hydrogen for remote applications , 2001 .