Excellent and effective interfacial transition layer with an organic/inorganic hybrid carbon nanotube network structure for basalt fiber reinforced high-performance thermoplastic composites

[1]  S. Nayak,et al.  Hybridization effect on the mechanical properties of basalt fiber reinforced ZnO modified epoxy composites , 2022, Polymer Composites.

[2]  Chengde Liu,et al.  Highly Enhancing the Interfacial and Mechanical Properties of Basalt Fiber/Poly(phthalazinone ether nitrile ketone) Composite by Thermoplastic Sizing Agents with Different Structures , 2022, Polymers.

[3]  Xiaoping Yang,et al.  Constructing a Rigid-and-Flexible Twin-Stage Gradient Interphase through Starlike Copolymer Coating on Carbon Fibers: A Route for Enhancing Interfacial Properties of Composites. , 2021, ACS applied materials & interfaces.

[4]  Chengde Liu,et al.  Enhanced interfacial and mechanical properties of basalt fiber reinforced poly(aryl ether nitrile ketone) composites by amino-silane coupling agents , 2021 .

[5]  Chengde Liu,et al.  Improved mechanical properties of basalt fiber/phthalonitrile composites modified by thermoplastic Poly(phthalazinone ether nitrile)s , 2021 .

[6]  Yudong Fu,et al.  Investigation of Mechanical Properties for Basalt Fiber/Epoxy Resin Composites Modified with La , 2021, Coatings.

[7]  Yudong Huang,et al.  Preparation and performance of fumed silica-stabilized epoxy resin pickering emulsion for basalt fiber–sizing agents , 2021, Advanced Composites and Hybrid Materials.

[8]  Dawei Zhang,et al.  PAI/MXene sizing-based dual functional coating for carbon fiber/PEEK composite , 2021 .

[9]  Bankim Chandra Ray,et al.  Improved mechanical responses of GFRP composites with epoxy-vinyl ester interpenetrating polymer network , 2020 .

[10]  Zhenqing Wang,et al.  Reinforcing effect of hybrid nano-coating on mechanical properties of basalt fiber/poly(lactic acid) environmental composites , 2020 .

[11]  K. Rhee,et al.  Recent advances in basalt-fiber-reinforced composites: Tailoring the fiber-matrix interface , 2020 .

[12]  B. Wang,et al.  A two-step combination strategy for significantly enhancing the interfacial adhesion of CF/PPS composites: The liquid-phase oxidation followed by grafting of silane coupling agent , 2020, Composites Part B: Engineering.

[13]  Huamin Zhou,et al.  Highly enhancing the interfacial strength of CF/PEEK composites by introducing PAIK onto diazonium functionalized carbon fibers , 2020 .

[14]  Shu Zhu,et al.  Enhanced interfacial interactions by PEEK-grafting and coupling of acylated CNT for GF/PEEK composites , 2020 .

[15]  Fen Wang,et al.  Interfacial improvement of carbon fiber reinforced epoxy composites by tuning the content of curing agent in sizing agent , 2020 .

[16]  J. Karger‐Kocsis,et al.  All-carbon multi-scale and hierarchical fibers and related structural composites: A review , 2020 .

[17]  Yang Chen,et al.  Multi-scale structure construction of carbon fiber surface by electrophoretic deposition and electropolymerization to enhance the interfacial strength of epoxy resin composites , 2020 .

[18]  A. Erkliğ,et al.  Mechanical and Dynamic Properties of Basalt Fiber-Reinforced Composites with Nanoclay Particles , 2020, Arabian Journal for Science and Engineering.

[19]  Ahmed Koubaa,et al.  Reinforcement of continuous fibers for extruded wood-flour/HDPE composites: Effects of fiber type and amount , 2019 .

[20]  Zhenqing Wang,et al.  Improving comprehensive mechanical properties of glass fiber reinforced composites by coating the ternary multiscale modifier , 2019, Materials Research Express.

[21]  S. Du,et al.  Enhanced interfacial strength of carbon fiber/PEEK composites using a facile approach via PEI&ZIF-67 synergistic modification , 2019, Journal of Materials Research and Technology.

[22]  E. Archer,et al.  Mechanical properties of short basalt fibre reinforced polypropylene and the effect of fibre sizing on adhesion , 2019, Composites Part B: Engineering.

[23]  Leping Huang,et al.  High-performance polyphenylene sulfide composites with ultra-high content of glass fiber fabrics , 2019, Composites Part B: Engineering.

[24]  Hongwei Zhou,et al.  PEEK composites with polyimide sizing SCF as reinforcement: Preparation, characterization, and mechanical properties , 2019, High Performance Polymers.

[25]  Yonggang Zhang,et al.  A two-step carbon fiber surface treatment and its effect on the interfacial properties of CF/EP composites: The electrochemical oxidation followed by grafting of silane coupling agent , 2019, Applied Surface Science.

[26]  Suyeon Lee,et al.  Mechanical, thermomechanical, and local anisotropy analyses of long basalt fiber reinforced polyamide 6 composites , 2019, Composite Structures.

[27]  Shu Zhu,et al.  Synergistic effect of hydrogen bonding and π-π stacking in interface of CF/PEEK composites , 2019, Composites Part B: Engineering.

[28]  Bankim Chandra Ray,et al.  Mechanical behavior of Graphene decorated carbon fiber reinforced polymer composites: An assessment of the influence of functional groups , 2019, Composites Part A: Applied Science and Manufacturing.

[29]  G. Song,et al.  The effect of self-synthesized hydroxyl-terminated hyperbranched polymer interface layer on the properties of carbon fiber reinforced epoxy composites , 2019, Applied Surface Science.

[30]  S. Hong,et al.  The effect of amino-silane coupling agents having different molecular structures on the mechanical properties of basalt fiber-reinforced polyamide 6,6 composites , 2019, Composites Part B: Engineering.

[31]  D. Xing,et al.  Factors governing the tensile strength of basalt fibre , 2019, Composites Part A: Applied Science and Manufacturing.

[32]  Lin Jin,et al.  Enhancing interfacial properties of carbon fibers reinforced epoxy composites via Layer-by-Layer self assembly GO/SiO2 multilayers films on carbon fibers surface , 2019, Applied Surface Science.

[33]  K. Rhee,et al.  Hierarchical structures of CNT@basalt fabric for tribological and electrical applications: Impact of growth temperature and time during synthesis , 2018, Composites Part A: Applied Science and Manufacturing.

[34]  Mengjie Zhang,et al.  A novel thermoplastic sizing containing graphene oxide functionalized with structural analogs of matrix for improving interfacial adhesion of CF/PES composites , 2018, Composites Part A: Applied Science and Manufacturing.

[35]  K. Rhee,et al.  Chemical vapor deposition-based grafting of CNTs onto basalt fabric and their reinforcement in epoxy-based composites , 2018, Composites Science and Technology.

[36]  Shu Zhu,et al.  Highly boosting the interlaminar shear strength of CF/PEEK composites via introduction of PEKK onto activated CF , 2018, Composites Part A: Applied Science and Manufacturing.

[37]  Yanhong Hu,et al.  Synthesis and application of a novel dicyanide-containing silane coupling agent , 2018, IOP Conference Series: Materials Science and Engineering.

[38]  M. Doğan,et al.  The effects of silane coupling agents on the mechanical properties of basalt fiber reinforced poly(butylene terephthalate) composites , 2018, Composites Part B: Engineering.

[39]  Zhanhu Guo,et al.  Interfacially reinforced unsaturated polyester carbon fiber composites with a vinyl ester-carbon nanotubes sizing agent , 2018, Composites Science and Technology.

[40]  Yijiao Xue,et al.  Interface enhancement of glass fiber fabric/epoxy composites by modifying fibers with functionalized MWCNTs , 2018, Composite Interfaces.

[41]  Xiaogang Chen,et al.  Surface modification of basalt fiber (BF) for improving compatibilities between BF and poly lactic acid (PLA) matrix , 2018, Composite Interfaces.

[42]  Y. Qiu,et al.  Effects of Styrene-Acrylic Sizing on the Mechanical Properties of Carbon Fiber Thermoplastic Towpregs and Their Composites , 2018, Molecules.

[43]  Junlin Chen,et al.  Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface , 2018 .

[44]  Junbiao Wang,et al.  Comparison of carbon nanotubes and graphene oxide coated carbon fiber for improving the interfacial properties of carbon fiber/epoxy composites , 2018 .

[45]  X. Liu,et al.  High efficient and continuous surface modification of carbon fibers with improved tensile strength and interfacial adhesion , 2017 .

[46]  S. S. Rao,et al.  Carbon nanotube/metal-sulfide composite flexible electrodes for high-performance quantum dot-sensitized solar cells and supercapacitors , 2017, Scientific Reports.

[47]  Xiao-jie Li,et al.  Mechanical, thermal and interfacial performances of carbon fiber reinforced composites flavored by carbon nanotube in matrix/interface , 2017 .

[48]  Lei Chen,et al.  Hierarchical poly(p-phenylene benzobisoxazole)/graphene oxide reinforcement with multifunctional and biomimic middle layer , 2016 .

[49]  P. Aungkavattana,et al.  Improving compressive strength of fly ash-based geopolymer composites by basalt fibers addition , 2016 .

[50]  É. Dantras,et al.  Influence of new thermoplastic sizing agents on the mechanical behavior of poly(ether ketone ketone)/carbon fiber composites , 2015 .

[51]  Henghui Zhou,et al.  Branched CNT@SnO2 nanorods@carbon hierarchical heterostructures for lithium ion batteries with high reversibility and rate capability , 2014 .

[52]  Zhang Shu,et al.  Fabrication of carbon nanotubes/carbon fiber hybrid fiber in industrial scale by sizing process , 2013 .

[53]  Chiara Colombo,et al.  Static and fatigue characterisation of new basalt fibre reinforced composites , 2012 .

[54]  S. Song,et al.  Surface modification and characterization of basalt fibers with hybrid sizings , 2011 .

[55]  Jie Zhang,et al.  Functional interphases with multi-walled carbon nanotubes in glass fibre/epoxy composites , 2010 .

[56]  N. A. Siddiqui,et al.  Tensile strength of glass fibres with carbon nanotube–epoxy nanocomposite coating , 2009 .

[57]  Riichiro Saito,et al.  Raman spectroscopy of carbon nanotubes , 2005 .

[58]  Peter Offermann,et al.  Sizings on alkali-resistant glass fibers: Environmental effects on mechanical properties , 2003 .