Design and simulation of an electromagnetic aircraft launch system

Electric actuators are increasingly supplanting or replacing mechanical actuators (steam or hydraulic) in ship systems. This trend started in commercial shipping, especially cruise ships, and there is now a move to adopt the benefits in military systems. This paper describes the design and analysis of a very large actuator for a military ship system an Electro-Magnetic Aircraft Launching System, or EMALS, which will accelerate aircraft to flight speeds in very short distances. The aim is to replace the steam catapult currently used on aircraft carriers with a linear electric motor. The entire system should fit within the confines of the existing steam catapult. The advantages of such a system are increased operational availability, lower airframe stress due to programmable acceleration profiles, and reduced maintenance (and hence reduced manning). The goal of the study described here is to investigate the many feasible solutions and to use simulations to compare their performance. This paper reports on the initial stages of the work, which uses the Virtual Test Bed (VTB) as the simulation and virtual prototyping environment. This yields substantial side benefits because the EMALS research program represents a meaningful test case for the VTB itself. Models of the different parts of the systems are being built up from the specifications and the characteristics required by the US Navy, and will be refined with increasing detail as the project is developed.

[1]  C.W. Brice,et al.  A virtual test bed for power electronic circuits and electric drive systems , 2000, COMPEL 2000. 7th Workshop on Computers in Power Electronics. Proceedings (Cat. No.00TH8535).

[2]  Ion Boldea,et al.  Linear electric actuators and generators , 1997, 1997 IEEE International Electric Machines and Drives Conference Record.

[3]  Jawad Faiz,et al.  Accurate modeling of single-sided linear induction motor considers end effect and equivalent thickness , 2000 .

[4]  Timothy J. E. Miller,et al.  Brushless Permanent-Magnet and Reluctance Motor Drives , 1989 .

[5]  A. Monti,et al.  Design and simulation of an electromagnetic aircraft launch system , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[6]  Jung Ho Lee,et al.  Dynamic characteristic analysis of LIM using coupled FEM and control algorithm , 2000 .

[7]  G.R. Slemon,et al.  Modeling of iron losses of surface-mounted permanent magnet synchronous motors , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[8]  I Boldea,et al.  Linear Motion Electromagnetic Systems , 1985 .

[9]  I. Boldea,et al.  Linear Electric Motors: Theory, Design and Practical Applications , 1987 .

[10]  K. Davey.  Pulsed linear induction motors in Maglev applications , 2000 .

[11]  Robert E. Hebner,et al.  Flywheel batteries come around again , 2002 .

[12]  Duane C. Hanselman,et al.  Brushless Permanent-Magnet Motor Design , 1994 .

[13]  Antonello Monti,et al.  A multilanguage environment for interactive simulation and development controls for power electronics , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[14]  S. Yamamura.  Theory of Linear Induction Motors , 1972 .

[15]  E. J. Lecourt.  Using Simulation to Determine the Maneuvering Performance of the WAGB‐20 , 1998 .