Wind turbine blade damage detection using an active sensing approach

The wind energy sector is one of the fastest growing parts of the clean energy industry. As the wind energy sector grows, so does an increasing concern for the damage detection of wind turbine blades. This paper proposes an active sensing approach by utilizing piezoceramic transducers as actuators and sensors. The influence of the crack quantity, location, length and depth on the wave propagation was experimentally studied. Sweep sine signals ranging from 1 khz to 50 khz were used as input signals for active sensing. The change in the energy that propagated through the cracks was verified as feasible in detecting crack-related damage. An innovative polar plot analysis method based on Fast Fourier transform was developed to compare the minuscule difference between the damage signals and the baseline signal. The polar plot was able to make apparent differences in both the magnitude and the phase of the signals, which could be correlated to crack depth and plane geometry, respectively, based on the observation of the damage.

[1]  Bernd Frankenstein,et al.  Structural Health Monitoring of Major Wind Turbine Components , 2013 .

[2]  M. J. Sundaresan,et al.  Smart Sensor System for Structural Condition Monitoring of Wind Turbines: 30 May 2002--30 April 2006 , 2006 .

[3]  Ephrahim Garcia,et al.  A Self-Sensing Piezoelectric Actuator for Collocated Control , 1992 .

[4]  James A. Sherwood,et al.  Inspection and monitoring of wind turbine blade-embedded wave defects during fatigue testing , 2014 .

[5]  Hyung Jin Lim,et al.  Nonlinear ultrasonic wave modulation for online fatigue crack detection , 2014 .

[6]  Marek Krawczuk,et al.  Damage detection strategies based on propagation of guided elastic waves , 2012 .

[7]  Daniel J. Inman,et al.  Impedance-based structural health monitoring of wind turbine blades , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[8]  Gangbing Song,et al.  Wind turbine blade health monitoring with piezoceramic-based wireless sensor network , 2013 .

[9]  Maciej Radzieński,et al.  Structural health monitoring by means of elastic wave propagation , 2012 .

[10]  Daniel J. Inman,et al.  Impedance‐Based Structural Health Monitoring , 2005 .

[11]  Dimitrios Zarouchas,et al.  Monitoring the Structural Integrity of Wind Turbine Blades Subcomponents Using Advanced Signal Processing Techniques , 2013 .

[12]  T. K. Gangopadhyay,et al.  Fibre Bragg gratings in structural health monitoring—Present status and applications , 2008 .

[13]  Victor Giurgiutiu,et al.  Embedded Self-Sensing Piezoelectric Active Sensors for On-Line Structural Identification , 2002 .

[14]  Hoon Sohn,et al.  Overview of Piezoelectric Impedance-Based Health Monitoring and Path Forward , 2003 .

[15]  Anindya Ghoshal,et al.  Structural Health Monitoring Static Test of a Wind Turbine Blade , 2002 .

[16]  Karen Margaret Holford,et al.  Approaches to Acoustic Emission Monitoring with Applicability to Key Components in Wind Turbines , 2013 .

[17]  M. Stack,et al.  On erosion issues associated with the leading edge of wind turbine blades , 2013 .

[18]  J. Santamarina,et al.  Rayleigh Wave Propagation for the Detection of Near Surface Discontinuities: Finite Element Modeling , 2003 .

[19]  Mark A. Rumsey,et al.  Structural health monitoring of wind turbine blades , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[20]  In Lee,et al.  Damage assessment of small-scale wind turbine blade using piezoelectric sensors , 2012, Smart Structures.

[21]  Gangbing Song,et al.  Smart aggregates: multi-functional sensors for concrete structures—a tutorial and a review , 2008 .

[22]  Anindya Ghoshal,et al.  Structural health monitoring techniques for wind turbine blades , 2000 .

[23]  Yan Liu,et al.  State of the Art in Condition Monitoring in Wind Turbines Based on Embedded FBG Sensors , 2010, 2010 Asia-Pacific Power and Energy Engineering Conference.

[24]  Mark J. Schulz,et al.  Multiple damage identification on a wind turbine blade using a structural neural system , 2007, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[25]  Nesbitt W. Hagood,et al.  Self-sensing piezoelectric actuation - Analysis and application to controlled structures , 1992 .

[26]  Moon-Seok Jang,et al.  Structural health monitoring of wind turbines using fiber Bragg grating based sensing system , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[27]  Tribikram Kundu,et al.  Noncontact detection of fatigue cracks by laser nonlinear wave modulation spectroscopy (LNWMS) , 2014 .

[28]  Daniel Rixen,et al.  Challenges in testing and monitoring the in-operation vibration characteristics of wind turbines , 2013 .