Pyramidal lattice sandwich structures with hollow composite trusses

Abstract Pyramidal lattice sandwich structures with hollow composite trusses were fabricated using a thermal expansion molding approach. Composite lattice structures with three relative densities were fabricated with two fiber architectures and the out-of-plane compression properties were measured and compared. Lattice cores with a fraction of carbon fibers circumferentially wound around the hollow trusses (Variant 2) exhibited superior mechanical properties compared with similar structures comprised of unidirectional fibers (Variant 1). The out-of-plane compressive properties of composite pyramidal lattice structures in Variant 2 were well-matched by analytical predictions. Unusual strain hardening behavior was observed in the plateau region for Variant 2, and the energy absorption capabilities were measured and compared with the similarly constructed silicone rubber–core truss pyramidal lattice structures (Variant 3). The energy absorption per unit mass of selected hollow truss composite lattice structures reported here surpassed that of both hybrid truss counterparts (Variant 3) and hollow truss metallic lattice structures.

[1]  Douglas T. Queheillalt,et al.  Pyramidal lattice truss structures with hollow trusses , 2005 .

[2]  Vikram Deshpande,et al.  The compressive and shear response of titanium matrix composite lattice structures , 2010 .

[3]  Daining Fang,et al.  Uniaxial local buckling strength of periodic lattice composites , 2009 .

[4]  Hilary Bart-Smith,et al.  Imperfection sensitivity of pyramidal core sandwich structures , 2007 .

[5]  M. Ashby,et al.  The topological design of multifunctional cellular metals , 2001 .

[6]  M. Ashby,et al.  Effective properties of the octet-truss lattice material , 2001 .

[7]  Haydn N. G. Wadley,et al.  Cellular metal lattices with hollow trusses , 2005 .

[8]  D. Fang,et al.  Characterization of edge effects of composite lattice structures , 2009 .

[9]  D. Fang,et al.  Enhancement of mechanical properties of hollow-strut foams: Analysis , 2009 .

[10]  Li Ma,et al.  Mechanical behavior of the sandwich structures with carbon fiber-reinforced pyramidal lattice truss core , 2010 .

[11]  Frank W. Zok,et al.  A protocol for characterizing the structural performance of metallic sandwich panels: application to pyramidal truss cores , 2004 .

[12]  H. Wadley,et al.  Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium , 2004, Acta Materialia.

[13]  Daining Fang,et al.  Mechanical properties of hierarchical cellular materials. Part I: Analysis , 2008 .

[14]  Haydn N. G. Wadley,et al.  On the performance of truss panels with Kagomé cores , 2003 .

[15]  Michael F. Ashby,et al.  Energy absorption of foam-filled circular tubes with braided composite walls , 2000 .

[16]  H. Wadley,et al.  Quasistatic deformation and failure modes of composite square honeycombs , 2008 .

[17]  Li Ma,et al.  Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures , 2010 .

[18]  Douglas T. Queheillalt,et al.  Structural performance of metallic sandwich beams with hollow truss cores , 2006 .

[19]  H. Wadley,et al.  The compressive response of carbon fiber composite pyramidal truss sandwich cores , 2007, International Journal of Materials Research.

[20]  Daining Fang,et al.  Manufacturing and testing of a CFRC sandwich cylinder with Kagome cores , 2009 .